include/configs/lacie_kw.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
   4  */
   5
   6 #ifndef _CONFIG_LACIE_KW_H
   7 #define _CONFIG_LACIE_KW_H
   8
   9 /*
  10  * Machine number definition
  11  */
  12 #if defined(CONFIG_INETSPACE_V2)
  13 #define CONFIG_MACH_TYPE                MACH_TYPE_INETSPACE_V2
  14 #elif defined(CONFIG_NETSPACE_V2)
  15 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_V2
  16 #elif defined(CONFIG_NETSPACE_LITE_V2)
  17 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_LITE_V2
  18 #elif defined(CONFIG_NETSPACE_MINI_V2)
  19 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_MINI_V2
  20 #elif defined(CONFIG_NETSPACE_MAX_V2)
  21 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_MAX_V2
  22 #elif defined(CONFIG_D2NET_V2)
  23 #define CONFIG_MACH_TYPE                MACH_TYPE_D2NET_V2
  24 #elif defined(CONFIG_NET2BIG_V2)
  25 #define CONFIG_MACH_TYPE                MACH_TYPE_NET2BIG_V2
  26 #else
  27 #error "Unknown board"
  28 #endif
  29
  30 /*
  31  * High Level Configuration Options (easy to change)
  32  */
  33 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  34 /* SoC name */
  35 #if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
  36 #define CONFIG_KW88F6192
  37 #else
  38 #define CONFIG_KW88F6281
  39 #endif
  40 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  41
  42 /*
  43  * Core clock definition
  44  */
  45 #define CONFIG_SYS_TCLK                 166000000 /* 166MHz */
  46
  47 /*
  48  * SDRAM configuration
  49  */
  50
  51 /*
  52  * Different SDRAM configuration and size for some of the boards derived
  53  * from the Network Space v2
  54  */
  55 #if defined(CONFIG_INETSPACE_V2)
  56 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-is2.cfg
  57 #elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
  58 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg
  59 #endif
  60
  61 /*
  62  * mv-common.h should be defined after CMD configs since it used them
  63  * to enable certain macros
  64  */
  65 #include "mv-common.h"
  66
  67 /* Remove or override few declarations from mv-common.h */
  68 #undef CONFIG_SYS_IDE_MAXBUS
  69 #undef CONFIG_SYS_IDE_MAXDEVICE
  70
  71 /*
  72  * Enable platform initialisation via misc_init_r() function
  73  */
  74
  75 /*
  76  * Ethernet Driver configuration
  77  */
  78 #ifdef CONFIG_CMD_NET
  79 #define CONFIG_MVGBE_PORTS              {1, 0} /* enable port 0 only */
  80 #define CONFIG_NETCONSOLE
  81 #endif
  82
  83 /*
  84  * SATA Driver configuration
  85  */
  86 #ifdef CONFIG_MVSATA_IDE
  87 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  88 #if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \
  89         defined(CONFIG_NET2BIG_V2)
  90 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
  91 #define CONFIG_SYS_IDE_MAXBUS           2
  92 #define CONFIG_SYS_IDE_MAXDEVICE        2
  93 #else
  94 #define CONFIG_SYS_IDE_MAXBUS           1
  95 #define CONFIG_SYS_IDE_MAXDEVICE        1
  96 #endif
  97 #endif /* CONFIG_MVSATA_IDE */
  98
  99 /*
 100  * Enable GPI0 support
 101  */
 102 #define CONFIG_KIRKWOOD_GPIO
 103
 104 /*
 105  * Enable I2C support
 106  */
 107 #ifdef CONFIG_CMD_I2C
 108 /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
 109 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 110 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4 /* 16-byte page size */
 111 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1 /* 8-bit device address */
 112 #if defined(CONFIG_NET2BIG_V2)
 113 #define CONFIG_SYS_I2C_G762_ADDR                0x3e
 114 #endif
 115 #endif /* CONFIG_CMD_I2C */
 116
 117 /*
 118  * Partition support
 119  */
 120
 121 /*
 122  * File systems support
 123  */
 124
 125 /*
 126  * Environment variables configurations
 127  */
 128 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64KB */
 129 #define CONFIG_ENV_SIZE                 0x1000  /* 4KB */
 130 #define CONFIG_ENV_ADDR                 0x70000
 131 #define CONFIG_ENV_OFFSET               0x70000 /* env starts here */
 132
 133 /*
 134  * Default environment variables
 135  */
 136 #define CONFIG_BOOTCOMMAND                                      \
 137         "dhcp && run netconsole; "                              \
 138         "if run usbload || run diskload; then bootm; fi"
 139
 140 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 141         "stdin=serial\0"                                        \
 142         "stdout=serial\0"                                       \
 143         "stderr=serial\0"                                       \
 144         "bootfile=uImage\0"                                     \
 145         "loadaddr=0x800000\0"                                   \
 146         "autoload=no\0"                                         \
 147         "netconsole="                                           \
 148                 "set stdin $stdin,nc; "                         \
 149                 "set stdout $stdout,nc; "                       \
 150                 "set stderr $stderr,nc;\0"                      \
 151         "diskload=ide reset && "                                \
 152                 "ext2load ide 0:1 $loadaddr /boot/$bootfile\0"  \
 153         "usbload=usb start && "                                 \
 154                 "fatload usb 0:1 $loadaddr /boot/$bootfile\0"
 155
 156 #endif /* _CONFIG_LACIE_KW_H */