soc: keystone_serdes: generalize to be used by other sub systems
[platform/kernel/u-boot.git] / include / configs / ks2_evm.h
1 /*
2  * Common configuration header file for all Keystone II EVM platforms
3  *
4  * (C) Copyright 2012-2014
5  *     Texas Instruments Incorporated, <www.ti.com>
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef __CONFIG_KS2_EVM_H
11 #define __CONFIG_KS2_EVM_H
12
13 #define CONFIG_SOC_KEYSTONE
14
15 /* U-Boot Build Configuration */
16 #define CONFIG_SKIP_LOWLEVEL_INIT       /* U-Boot is a 2nd stage loader */
17 #define CONFIG_SYS_NO_FLASH             /* that is, no *NOR* flash */
18 #define CONFIG_SYS_CONSOLE_INFO_QUIET
19 #define CONFIG_BOARD_EARLY_INIT_F
20 #define CONFIG_SYS_THUMB_BUILD
21
22 /* SoC Configuration */
23 #define CONFIG_ARMV7
24 #define CONFIG_ARCH_CPU_INIT
25 #define CONFIG_SYS_ARCH_TIMER
26 #define CONFIG_SYS_HZ                   1000
27 #define CONFIG_SYS_TEXT_BASE            0x0c001000
28 #define CONFIG_SPL_TARGET               "u-boot-spi.gph"
29 #define CONFIG_SYS_DCACHE_OFF
30
31 /* Memory Configuration */
32 #define CONFIG_NR_DRAM_BANKS            2
33 #define CONFIG_SYS_SDRAM_BASE           0x80000000
34 #define CONFIG_SYS_LPAE_SDRAM_BASE      0x800000000
35 #define CONFIG_MAX_RAM_BANK_SIZE        (2 << 30)       /* 2GB */
36 #define CONFIG_STACKSIZE                (512 << 10)     /* 512 KiB */
37 #define CONFIG_SYS_MALLOC_LEN           (4 << 20)       /* 4 MiB */
38 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE - \
39                                         GENERATED_GBL_DATA_SIZE)
40
41 /* SPL SPI Loader Configuration */
42 #define CONFIG_SPL_PAD_TO               65536
43 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_PAD_TO - 8)
44 #define CONFIG_SPL_BSS_START_ADDR       (CONFIG_SPL_TEXT_BASE + \
45                                         CONFIG_SPL_MAX_SIZE)
46 #define CONFIG_SPL_BSS_MAX_SIZE         (32 * 1024)
47 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
48                                         CONFIG_SPL_BSS_MAX_SIZE)
49 #define CONFIG_SYS_SPL_MALLOC_SIZE      (32 * 1024)
50 #define CONFIG_SPL_STACK_SIZE           (8 * 1024)
51 #define CONFIG_SPL_STACK                (CONFIG_SYS_SPL_MALLOC_START + \
52                                         CONFIG_SYS_SPL_MALLOC_SIZE + \
53                                         CONFIG_SPL_STACK_SIZE - 4)
54 #define CONFIG_SPL_LIBCOMMON_SUPPORT
55 #define CONFIG_SPL_LIBGENERIC_SUPPORT
56 #define CONFIG_SPL_SERIAL_SUPPORT
57 #define CONFIG_SPL_SPI_FLASH_SUPPORT
58 #define CONFIG_SPL_SPI_SUPPORT
59 #define CONFIG_SPL_BOARD_INIT
60 #define CONFIG_SPL_SPI_LOAD
61 #define CONFIG_SYS_SPI_U_BOOT_OFFS      CONFIG_SPL_PAD_TO
62 #define CONFIG_SPL_FRAMEWORK
63
64 /* UART Configuration */
65 #define CONFIG_SYS_NS16550
66 #define CONFIG_SYS_NS16550_SERIAL
67 #define CONFIG_SYS_NS16550_MEM32
68 #define CONFIG_SYS_NS16550_REG_SIZE     -4
69 #define CONFIG_SYS_NS16550_COM1         KS2_UART0_BASE
70 #define CONFIG_SYS_NS16550_COM2         KS2_UART1_BASE
71 #define CONFIG_SYS_NS16550_CLK          clk_get_rate(KS2_CLK1_6)
72 #define CONFIG_CONS_INDEX               1
73 #define CONFIG_BAUDRATE                 115200
74
75 /* SPI Configuration */
76 #define CONFIG_SPI
77 #define CONFIG_SPI_FLASH
78 #define CONFIG_SPI_FLASH_STMICRO
79 #define CONFIG_DAVINCI_SPI
80 #define CONFIG_CMD_SPI
81 #define CONFIG_SYS_SPI_CLK              clk_get_rate(KS2_CLK1_6)
82 #define CONFIG_SF_DEFAULT_SPEED         30000000
83 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
84 #define CONFIG_SYS_SPI0
85 #define CONFIG_SYS_SPI_BASE             KS2_SPI0_BASE
86 #define CONFIG_SYS_SPI0_NUM_CS          4
87 #define CONFIG_SYS_SPI1
88 #define CONFIG_SYS_SPI1_BASE            KS2_SPI1_BASE
89 #define CONFIG_SYS_SPI1_NUM_CS          4
90 #define CONFIG_SYS_SPI2
91 #define CONFIG_SYS_SPI2_BASE            KS2_SPI2_BASE
92 #define CONFIG_SYS_SPI2_NUM_CS          4
93
94 /* Network Configuration */
95 #define CONFIG_MII
96 #define CONFIG_BOOTP_DEFAULT
97 #define CONFIG_BOOTP_DNS
98 #define CONFIG_BOOTP_DNS2
99 #define CONFIG_BOOTP_SEND_HOSTNAME
100 #define CONFIG_NET_RETRY_COUNT          32
101 #define CONFIG_NET_MULTI
102 #define CONFIG_GET_LINK_STATUS_ATTEMPTS 5
103 #define CONFIG_SYS_SGMII_REFCLK_MHZ     312
104 #define CONFIG_SYS_SGMII_LINERATE_MHZ   1250
105 #define CONFIG_SYS_SGMII_RATESCALE      2
106
107 /* Keyston Navigator Configuration */
108 #define CONFIG_KSNAV_QM_BASE_ADDRESS            KS2_QM_BASE_ADDRESS
109 #define CONFIG_KSNAV_QM_CONF_BASE               KS2_QM_CONF_BASE
110 #define CONFIG_KSNAV_QM_DESC_SETUP_BASE         KS2_QM_DESC_SETUP_BASE
111 #define CONFIG_KSNAV_QM_STATUS_RAM_BASE         KS2_QM_STATUS_RAM_BASE
112 #define CONFIG_KSNAV_QM_INTD_CONF_BASE          KS2_QM_INTD_CONF_BASE
113 #define CONFIG_KSNAV_QM_PDSP1_CMD_BASE          KS2_QM_PDSP1_CMD_BASE
114 #define CONFIG_KSNAV_QM_PDSP1_CTRL_BASE         KS2_QM_PDSP1_CTRL_BASE
115 #define CONFIG_KSNAV_QM_PDSP1_IRAM_BASE         KS2_QM_PDSP1_IRAM_BASE
116 #define CONFIG_KSNAV_QM_MANAGER_QUEUES_BASE     KS2_QM_MANAGER_QUEUES_BASE
117 #define CONFIG_KSNAV_QM_MANAGER_Q_PROXY_BASE    KS2_QM_MANAGER_Q_PROXY_BASE
118 #define CONFIG_KSNAV_QM_QUEUE_STATUS_BASE       KS2_QM_QUEUE_STATUS_BASE
119 #define CONFIG_KSNAV_QM_LINK_RAM_BASE           KS2_QM_LINK_RAM_BASE
120 #define CONFIG_KSNAV_QM_REGION_NUM              KS2_QM_REGION_NUM
121 #define CONFIG_KSNAV_QM_QPOOL_NUM               KS2_QM_QPOOL_NUM
122
123 /* NETCP pktdma */
124 #define CONFIG_KSNAV_NETCP_PDMA_CTRL_BASE       KS2_NETCP_PDMA_CTRL_BASE
125 #define CONFIG_KSNAV_NETCP_PDMA_TX_BASE         KS2_NETCP_PDMA_TX_BASE
126 #define CONFIG_KSNAV_NETCP_PDMA_TX_CH_NUM       KS2_NETCP_PDMA_TX_CH_NUM
127 #define CONFIG_KSNAV_NETCP_PDMA_RX_BASE         KS2_NETCP_PDMA_RX_BASE
128 #define CONFIG_KSNAV_NETCP_PDMA_RX_CH_NUM       KS2_NETCP_PDMA_RX_CH_NUM
129 #define CONFIG_KSNAV_NETCP_PDMA_SCHED_BASE      KS2_NETCP_PDMA_SCHED_BASE
130 #define CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_BASE    KS2_NETCP_PDMA_RX_FLOW_BASE
131 #define CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_NUM     KS2_NETCP_PDMA_RX_FLOW_NUM
132 #define CONFIG_KSNAV_NETCP_PDMA_RX_FREE_QUEUE   KS2_NETCP_PDMA_RX_FREE_QUEUE
133 #define CONFIG_KSNAV_NETCP_PDMA_RX_RCV_QUEUE    KS2_NETCP_PDMA_RX_RCV_QUEUE
134 #define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE    KS2_NETCP_PDMA_TX_SND_QUEUE
135
136 /* Keystone net */
137 #define CONFIG_KSNET_MAC_ID_BASE                KS2_MAC_ID_BASE_ADDR
138 #define CONFIG_KSNET_NETCP_BASE                 KS2_NETCP_BASE
139 #define CONFIG_KSNET_SERDES_SGMII_BASE          KS2_SGMII_SERDES_BASE
140 #define CONFIG_KSNET_SERDES_LANES_PER_SGMII     KS2_LANES_PER_SGMII_SERDES
141
142 /* AEMIF */
143 #define CONFIG_TI_AEMIF
144 #define CONFIG_AEMIF_CNTRL_BASE         KS2_AEMIF_CNTRL_BASE
145
146 /* I2C Configuration */
147 #define CONFIG_SYS_I2C
148 #define CONFIG_SYS_I2C_DAVINCI
149 #define CONFIG_SYS_DAVINCI_I2C_SPEED    100000
150 #define CONFIG_SYS_DAVINCI_I2C_SLAVE    0x10 /* SMBus host address */
151 #define CONFIG_SYS_DAVINCI_I2C_SPEED1   100000
152 #define CONFIG_SYS_DAVINCI_I2C_SLAVE1   0x10 /* SMBus host address */
153 #define CONFIG_SYS_DAVINCI_I2C_SPEED2   100000
154 #define CONFIG_SYS_DAVINCI_I2C_SLAVE2   0x10 /* SMBus host address */
155 #define I2C_BUS_MAX                     3
156
157 /* EEPROM definitions */
158 #define CONFIG_SYS_I2C_MULTI_EEPROMS
159 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
160 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
161 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6
162 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   20
163 #define CONFIG_ENV_EEPROM_IS_ON_I2C
164
165 /* NAND Configuration */
166 #define CONFIG_NAND_DAVINCI
167 #define CONFIG_KEYSTONE_RBL_NAND
168 #define CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE       CONFIG_ENV_OFFSET
169 #define CONFIG_SYS_NAND_MASK_CLE                0x4000
170 #define CONFIG_SYS_NAND_MASK_ALE                0x2000
171 #define CONFIG_SYS_NAND_CS                      2
172 #define CONFIG_SYS_NAND_USE_FLASH_BBT
173 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
174
175 #define CONFIG_SYS_NAND_LARGEPAGE
176 #define CONFIG_SYS_NAND_BASE_LIST               { 0x30000000, }
177 #define CONFIG_SYS_MAX_NAND_DEVICE              1
178 #define CONFIG_SYS_NAND_MAX_CHIPS               1
179 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
180 #define CONFIG_ENV_SIZE                         (256 << 10)  /* 256 KiB */
181 #define CONFIG_ENV_IS_IN_NAND
182 #define CONFIG_ENV_OFFSET                       0x100000
183 #define CONFIG_MTD_PARTITIONS
184 #define CONFIG_MTD_DEVICE
185 #define CONFIG_RBTREE
186 #define CONFIG_LZO
187 #define MTDIDS_DEFAULT                  "nand0=davinci_nand.0"
188 #define MTDPARTS_DEFAULT                "mtdparts=davinci_nand.0:" \
189                                         "1024k(bootloader)ro,512k(params)ro," \
190                                         "-(ubifs)"
191
192 /* USB Configuration */
193 #define CONFIG_USB_XHCI
194 #define CONFIG_USB_XHCI_KEYSTONE
195 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
196 #define CONFIG_USB_STORAGE
197 #define CONFIG_DOS_PARTITION
198 #define CONFIG_EFI_PARTITION
199 #define CONFIG_FS_FAT
200 #define CONFIG_SYS_CACHELINE_SIZE               64
201 #define CONFIG_USB_SS_BASE                      KS2_USB_SS_BASE
202 #define CONFIG_USB_HOST_XHCI_BASE               KS2_USB_HOST_XHCI_BASE
203 #define CONFIG_DEV_USB_PHY_BASE                 KS2_DEV_USB_PHY_BASE
204 #define CONFIG_USB_PHY_CFG_BASE                 KS2_USB_PHY_CFG_BASE
205
206 /* U-Boot command configuration */
207 #include <config_cmd_default.h>
208 #define CONFIG_CMD_ASKENV
209 #define CONFIG_CMD_DHCP
210 #define CONFIG_CMD_I2C
211 #define CONFIG_CMD_PING
212 #define CONFIG_CMD_SAVES
213 #define CONFIG_CMD_MTDPARTS
214 #define CONFIG_CMD_NAND
215 #define CONFIG_CMD_UBI
216 #define CONFIG_CMD_UBIFS
217 #define CONFIG_CMD_SF
218 #define CONFIG_CMD_EEPROM
219 #define CONFIG_CMD_USB
220
221 /* U-Boot general configuration */
222 #define CONFIG_SYS_GENERIC_BOARD
223 #define CONFIG_MISC_INIT_R
224 #define CONFIG_SYS_CBSIZE               1024
225 #define CONFIG_SYS_PBSIZE               2048
226 #define CONFIG_SYS_MAXARGS              16
227 #define CONFIG_SYS_HUSH_PARSER
228 #define CONFIG_SYS_LONGHELP
229 #define CONFIG_CRC32_VERIFY
230 #define CONFIG_MX_CYCLIC
231 #define CONFIG_CMDLINE_EDITING
232 #define CONFIG_VERSION_VARIABLE
233 #define CONFIG_TIMESTAMP
234
235 /* EDMA3 */
236 #define CONFIG_TI_EDMA3
237
238 #define CONFIG_BOOTDELAY                3
239 #define CONFIG_BOOTFILE                 "uImage"
240 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
241         "boot=ramfs\0"                                                  \
242         "tftp_root=/\0"                                                 \
243         "nfs_root=/export\0"                                            \
244         "mem_lpae=1\0"                                                  \
245         "mem_reserve=512M\0"                                            \
246         "addr_fdt=0x87000000\0"                                         \
247         "addr_kern=0x88000000\0"                                        \
248         KS2_ADDR_MON                                                    \
249         "addr_uboot=0x87000000\0"                                       \
250         "addr_fs=0x82000000\0"                                          \
251         "addr_ubi=0x82000000\0"                                         \
252         "addr_secdb_key=0xc000000\0"                                    \
253         "fdt_high=0xffffffff\0"                                         \
254         KS2_FDT_NAME                                                    \
255         "name_fs=arago-console-image.cpio.gz\0"                         \
256         "name_kern=uImage\0"                                            \
257         KS2_NAME_MON                                                    \
258         NAME_UBOOT                                                      \
259         NAME_UBI                                                        \
260         "run_mon=mon_install ${addr_mon}\0"                             \
261         "run_kern=bootm ${addr_kern} - ${addr_fdt}\0"                   \
262         "init_net=run args_all args_net\0"                              \
263         "init_ubi=run args_all args_ubi; "                              \
264                 "ubi part ubifs; ubifsmount boot;"                      \
265                 "ubifsload ${addr_secdb_key} securedb.key.bin;\0"       \
266         "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0"       \
267         "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0"               \
268         "get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0"    \
269         "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0"            \
270         "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"       \
271         "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0"               \
272         "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \
273         "burn_uboot_spi=sf probe; sf erase 0 0x100000; "                \
274                 "sf write ${addr_uboot} 0 ${filesize}\0"                \
275         "burn_uboot_nand=nand erase 0 0x100000; "                       \
276                 "nand write ${addr_uboot} 0 ${filesize}\0"              \
277         "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0"  \
278         KS2_ARGS_UBI                                                    \
279         "args_net=setenv bootargs ${bootargs} rootfstype=nfs "          \
280                 "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root},"     \
281                 "${nfs_options} ip=dhcp\0"                              \
282         "nfs_options=v3,tcp,rsize=4096,wsize=4096\0"                    \
283         "get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0"     \
284         "get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0"  \
285         "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"     \
286         "get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0"        \
287         "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0"       \
288         "burn_ubi=nand erase.part ubifs; "                              \
289                 "nand write ${addr_ubi} ubifs ${filesize}\0"            \
290         "init_ramfs=run args_all args_ramfs get_fs_ramfs\0"             \
291         "args_ramfs=setenv bootargs ${bootargs} "                       \
292                 "rdinit=/sbin/init rw root=/dev/ram0 "                  \
293                 "initrd=0x802000000,9M\0"                               \
294         "no_post=1\0"                                                   \
295         "mtdparts=mtdparts=davinci_nand.0:"                             \
296                 "1024k(bootloader)ro,512k(params)ro,-(ubifs)\0"
297
298 #define CONFIG_BOOTCOMMAND                                              \
299         "run init_${boot} get_fdt_${boot} get_mon_${boot} "             \
300                 "get_kern_${boot} run_mon run_kern"
301
302 #define CONFIG_BOOTARGS                                                 \
303
304 /* Linux interfacing */
305 #define CONFIG_CMDLINE_TAG
306 #define CONFIG_SETUP_MEMORY_TAGS
307 #define CONFIG_OF_LIBFDT                1
308 #define CONFIG_OF_BOARD_SETUP
309 #define CONFIG_SYS_BARGSIZE             1024
310 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x08000000)
311 #define CONFIG_LINUX_BOOT_PARAM_ADDR    (CONFIG_SYS_SDRAM_BASE + 0x100)
312
313 #define CONFIG_SUPPORT_RAW_INITRD
314
315 /* we may include files below only after all above definitions */
316 #include <asm/arch/hardware.h>
317 #include <asm/arch/clock.h>
318 #define CONFIG_SYS_HZ_CLOCK             clk_get_rate(KS2_CLK1_6)
319
320 /* Maximum memory size for relocated U-boot at the end of the DDR3 memory
321    which is NOT applicable for DDR ECC test */
322 #define CONFIG_MAX_UBOOT_MEM_SIZE       (4 << 20)       /* 4 MiB */
323
324 #endif /* __CONFIG_KS2_EVM_H */