include/configs/ks2_evm.h

   1 /*
   2  * Common configuration header file for all Keystone II EVM platforms
   3  *
   4  * (C) Copyright 2012-2014
   5  *     Texas Instruments Incorporated, <www.ti.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_KS2_EVM_H
  11 #define __CONFIG_KS2_EVM_H
  12
  13 #define CONFIG_SOC_KEYSTONE
  14
  15 /* U-Boot Build Configuration */
  16 #define CONFIG_SKIP_LOWLEVEL_INIT       /* U-Boot is a 2nd stage loader */
  17 #define CONFIG_SYS_NO_FLASH             /* that is, no *NOR* flash */
  18 #define CONFIG_SYS_CONSOLE_INFO_QUIET
  19 #define CONFIG_BOARD_EARLY_INIT_F
  20 #define CONFIG_SYS_THUMB_BUILD
  21
  22 /* SoC Configuration */
  23 #define CONFIG_ARCH_CPU_INIT
  24 #define CONFIG_SYS_ARCH_TIMER
  25 #define CONFIG_SYS_TEXT_BASE            0x0c001000
  26 #define CONFIG_SPL_TARGET               "u-boot-spi.gph"
  27 #define CONFIG_SYS_DCACHE_OFF
  28
  29 /* Memory Configuration */
  30 #define CONFIG_NR_DRAM_BANKS            2
  31 #define CONFIG_SYS_SDRAM_BASE           0x80000000
  32 #define CONFIG_SYS_LPAE_SDRAM_BASE      0x800000000
  33 #define CONFIG_MAX_RAM_BANK_SIZE        (2 << 30)       /* 2GB */
  34 #define CONFIG_STACKSIZE                (512 << 10)     /* 512 KiB */
  35 #define CONFIG_SYS_MALLOC_LEN           (4 << 20)       /* 4 MiB */
  36 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE - \
  37                                         GENERATED_GBL_DATA_SIZE)
  38
  39 /* SPL SPI Loader Configuration */
  40 #define CONFIG_SPL_PAD_TO               65536
  41 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_PAD_TO - 8)
  42 #define CONFIG_SPL_BSS_START_ADDR       (CONFIG_SPL_TEXT_BASE + \
  43                                         CONFIG_SPL_MAX_SIZE)
  44 #define CONFIG_SPL_BSS_MAX_SIZE         (32 * 1024)
  45 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
  46                                         CONFIG_SPL_BSS_MAX_SIZE)
  47 #define CONFIG_SYS_SPL_MALLOC_SIZE      (32 * 1024)
  48 #define CONFIG_SPL_STACK_SIZE           (8 * 1024)
  49 #define CONFIG_SPL_STACK                (CONFIG_SYS_SPL_MALLOC_START + \
  50                                         CONFIG_SYS_SPL_MALLOC_SIZE + \
  51                                         CONFIG_SPL_STACK_SIZE - 4)
  52 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  53 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  54 #define CONFIG_SPL_SERIAL_SUPPORT
  55 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  56 #define CONFIG_SPL_SPI_SUPPORT
  57 #define CONFIG_SPL_BOARD_INIT
  58 #define CONFIG_SPL_SPI_LOAD
  59 #define CONFIG_SYS_SPI_U_BOOT_OFFS      CONFIG_SPL_PAD_TO
  60 #define CONFIG_SPL_FRAMEWORK
  61
  62 /* UART Configuration */
  63 #define CONFIG_SYS_NS16550
  64 #define CONFIG_SYS_NS16550_SERIAL
  65 #define CONFIG_SYS_NS16550_MEM32
  66 #define CONFIG_SYS_NS16550_REG_SIZE     -4
  67 #define CONFIG_SYS_NS16550_COM1         KS2_UART0_BASE
  68 #define CONFIG_SYS_NS16550_COM2         KS2_UART1_BASE
  69 #define CONFIG_SYS_NS16550_CLK          clk_get_rate(KS2_CLK1_6)
  70 #define CONFIG_CONS_INDEX               1
  71 #define CONFIG_BAUDRATE                 115200
  72
  73 /* SPI Configuration */
  74 #define CONFIG_SPI
  75 #define CONFIG_SPI_FLASH
  76 #define CONFIG_SPI_FLASH_STMICRO
  77 #define CONFIG_DAVINCI_SPI
  78 #define CONFIG_CMD_SPI
  79 #define CONFIG_SYS_SPI_CLK              clk_get_rate(KS2_CLK1_6)
  80 #define CONFIG_SF_DEFAULT_SPEED         30000000
  81 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
  82 #define CONFIG_SYS_SPI0
  83 #define CONFIG_SYS_SPI_BASE             KS2_SPI0_BASE
  84 #define CONFIG_SYS_SPI0_NUM_CS          4
  85 #define CONFIG_SYS_SPI1
  86 #define CONFIG_SYS_SPI1_BASE            KS2_SPI1_BASE
  87 #define CONFIG_SYS_SPI1_NUM_CS          4
  88 #define CONFIG_SYS_SPI2
  89 #define CONFIG_SYS_SPI2_BASE            KS2_SPI2_BASE
  90 #define CONFIG_SYS_SPI2_NUM_CS          4
  91
  92 /* Network Configuration */
  93 #define CONFIG_PHYLIB
  94 #define CONFIG_PHY_MARVELL
  95 #define CONFIG_MII
  96 #define CONFIG_BOOTP_DEFAULT
  97 #define CONFIG_BOOTP_DNS
  98 #define CONFIG_BOOTP_DNS2
  99 #define CONFIG_BOOTP_SEND_HOSTNAME
 100 #define CONFIG_NET_RETRY_COUNT          32
 101 #define CONFIG_NET_MULTI
 102 #define CONFIG_SYS_SGMII_REFCLK_MHZ     312
 103 #define CONFIG_SYS_SGMII_LINERATE_MHZ   1250
 104 #define CONFIG_SYS_SGMII_RATESCALE      2
 105
 106 /* Keyston Navigator Configuration */
 107 #define CONFIG_TI_KSNAV
 108 #define CONFIG_KSNAV_QM_BASE_ADDRESS            KS2_QM_BASE_ADDRESS
 109 #define CONFIG_KSNAV_QM_CONF_BASE               KS2_QM_CONF_BASE
 110 #define CONFIG_KSNAV_QM_DESC_SETUP_BASE         KS2_QM_DESC_SETUP_BASE
 111 #define CONFIG_KSNAV_QM_STATUS_RAM_BASE         KS2_QM_STATUS_RAM_BASE
 112 #define CONFIG_KSNAV_QM_INTD_CONF_BASE          KS2_QM_INTD_CONF_BASE
 113 #define CONFIG_KSNAV_QM_PDSP1_CMD_BASE          KS2_QM_PDSP1_CMD_BASE
 114 #define CONFIG_KSNAV_QM_PDSP1_CTRL_BASE         KS2_QM_PDSP1_CTRL_BASE
 115 #define CONFIG_KSNAV_QM_PDSP1_IRAM_BASE         KS2_QM_PDSP1_IRAM_BASE
 116 #define CONFIG_KSNAV_QM_MANAGER_QUEUES_BASE     KS2_QM_MANAGER_QUEUES_BASE
 117 #define CONFIG_KSNAV_QM_MANAGER_Q_PROXY_BASE    KS2_QM_MANAGER_Q_PROXY_BASE
 118 #define CONFIG_KSNAV_QM_QUEUE_STATUS_BASE       KS2_QM_QUEUE_STATUS_BASE
 119 #define CONFIG_KSNAV_QM_LINK_RAM_BASE           KS2_QM_LINK_RAM_BASE
 120 #define CONFIG_KSNAV_QM_REGION_NUM              KS2_QM_REGION_NUM
 121 #define CONFIG_KSNAV_QM_QPOOL_NUM               KS2_QM_QPOOL_NUM
 122
 123 /* NETCP pktdma */
 124 #define CONFIG_KSNAV_PKTDMA_NETCP
 125 #define CONFIG_KSNAV_NETCP_PDMA_CTRL_BASE       KS2_NETCP_PDMA_CTRL_BASE
 126 #define CONFIG_KSNAV_NETCP_PDMA_TX_BASE         KS2_NETCP_PDMA_TX_BASE
 127 #define CONFIG_KSNAV_NETCP_PDMA_TX_CH_NUM       KS2_NETCP_PDMA_TX_CH_NUM
 128 #define CONFIG_KSNAV_NETCP_PDMA_RX_BASE         KS2_NETCP_PDMA_RX_BASE
 129 #define CONFIG_KSNAV_NETCP_PDMA_RX_CH_NUM       KS2_NETCP_PDMA_RX_CH_NUM
 130 #define CONFIG_KSNAV_NETCP_PDMA_SCHED_BASE      KS2_NETCP_PDMA_SCHED_BASE
 131 #define CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_BASE    KS2_NETCP_PDMA_RX_FLOW_BASE
 132 #define CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_NUM     KS2_NETCP_PDMA_RX_FLOW_NUM
 133 #define CONFIG_KSNAV_NETCP_PDMA_RX_FREE_QUEUE   KS2_NETCP_PDMA_RX_FREE_QUEUE
 134 #define CONFIG_KSNAV_NETCP_PDMA_RX_RCV_QUEUE    KS2_NETCP_PDMA_RX_RCV_QUEUE
 135 #define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE    KS2_NETCP_PDMA_TX_SND_QUEUE
 136
 137 /* Keystone net */
 138 #define CONFIG_DRIVER_TI_KEYSTONE_NET
 139 #define CONFIG_KSNET_MAC_ID_BASE                KS2_MAC_ID_BASE_ADDR
 140 #define CONFIG_KSNET_NETCP_BASE                 KS2_NETCP_BASE
 141 #define CONFIG_KSNET_SERDES_SGMII_BASE          KS2_SGMII_SERDES_BASE
 142 #define CONFIG_KSNET_SERDES_SGMII2_BASE         KS2_SGMII_SERDES2_BASE
 143 #define CONFIG_KSNET_SERDES_LANES_PER_SGMII     KS2_LANES_PER_SGMII_SERDES
 144
 145 /* SerDes */
 146 #define CONFIG_TI_KEYSTONE_SERDES
 147
 148 /* AEMIF */
 149 #define CONFIG_TI_AEMIF
 150 #define CONFIG_AEMIF_CNTRL_BASE         KS2_AEMIF_CNTRL_BASE
 151
 152 /* I2C Configuration */
 153 #define CONFIG_SYS_I2C
 154 #define CONFIG_SYS_I2C_DAVINCI
 155 #define CONFIG_SYS_DAVINCI_I2C_SPEED    100000
 156 #define CONFIG_SYS_DAVINCI_I2C_SLAVE    0x10 /* SMBus host address */
 157 #define CONFIG_SYS_DAVINCI_I2C_SPEED1   100000
 158 #define CONFIG_SYS_DAVINCI_I2C_SLAVE1   0x10 /* SMBus host address */
 159 #define CONFIG_SYS_DAVINCI_I2C_SPEED2   100000
 160 #define CONFIG_SYS_DAVINCI_I2C_SLAVE2   0x10 /* SMBus host address */
 161 #define I2C_BUS_MAX                     3
 162
 163 /* EEPROM definitions */
 164 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 165 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 166 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 167 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6
 168 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   20
 169 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 170
 171 /* NAND Configuration */
 172 #define CONFIG_NAND_DAVINCI
 173 #define CONFIG_KEYSTONE_RBL_NAND
 174 #define CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE       CONFIG_ENV_OFFSET
 175 #define CONFIG_SYS_NAND_MASK_CLE                0x4000
 176 #define CONFIG_SYS_NAND_MASK_ALE                0x2000
 177 #define CONFIG_SYS_NAND_CS                      2
 178 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 179 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 180
 181 #define CONFIG_SYS_NAND_LARGEPAGE
 182 #define CONFIG_SYS_NAND_BASE_LIST               { 0x30000000, }
 183 #define CONFIG_SYS_MAX_NAND_DEVICE              1
 184 #define CONFIG_SYS_NAND_MAX_CHIPS               1
 185 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
 186 #define CONFIG_ENV_SIZE                         (256 << 10)  /* 256 KiB */
 187 #define CONFIG_ENV_IS_IN_NAND
 188 #define CONFIG_ENV_OFFSET                       0x100000
 189 #define CONFIG_MTD_PARTITIONS
 190 #define CONFIG_MTD_DEVICE
 191 #define CONFIG_RBTREE
 192 #define CONFIG_LZO
 193 #define MTDIDS_DEFAULT                  "nand0=davinci_nand.0"
 194 #define MTDPARTS_DEFAULT                "mtdparts=davinci_nand.0:" \
 195                                         "1024k(bootloader)ro,512k(params)ro," \
 196                                         "-(ubifs)"
 197
 198 /* USB Configuration */
 199 #define CONFIG_USB_XHCI
 200 #define CONFIG_USB_XHCI_KEYSTONE
 201 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
 202 #define CONFIG_USB_STORAGE
 203 #define CONFIG_DOS_PARTITION
 204 #define CONFIG_EFI_PARTITION
 205 #define CONFIG_FS_FAT
 206 #define CONFIG_SYS_CACHELINE_SIZE               64
 207 #define CONFIG_USB_SS_BASE                      KS2_USB_SS_BASE
 208 #define CONFIG_USB_HOST_XHCI_BASE               KS2_USB_HOST_XHCI_BASE
 209 #define CONFIG_DEV_USB_PHY_BASE                 KS2_DEV_USB_PHY_BASE
 210 #define CONFIG_USB_PHY_CFG_BASE                 KS2_USB_PHY_CFG_BASE
 211
 212 /* U-Boot command configuration */
 213 #include <config_cmd_default.h>
 214 #define CONFIG_CMD_ASKENV
 215 #define CONFIG_CMD_DHCP
 216 #define CONFIG_CMD_I2C
 217 #define CONFIG_CMD_PING
 218 #define CONFIG_CMD_SAVES
 219 #define CONFIG_CMD_MTDPARTS
 220 #define CONFIG_CMD_NAND
 221 #define CONFIG_CMD_UBI
 222 #define CONFIG_CMD_UBIFS
 223 #define CONFIG_CMD_SF
 224 #define CONFIG_CMD_EEPROM
 225 #define CONFIG_CMD_USB
 226 #define CONFIG_CMD_FAT
 227 #define CONFIG_CMD_FS_GENERIC
 228
 229 /* U-Boot general configuration */
 230 #define CONFIG_SYS_GENERIC_BOARD
 231 #define CONFIG_MISC_INIT_R
 232 #define CONFIG_SYS_CBSIZE               1024
 233 #define CONFIG_SYS_PBSIZE               2048
 234 #define CONFIG_SYS_MAXARGS              16
 235 #define CONFIG_SYS_HUSH_PARSER
 236 #define CONFIG_SYS_LONGHELP
 237 #define CONFIG_CRC32_VERIFY
 238 #define CONFIG_MX_CYCLIC
 239 #define CONFIG_CMDLINE_EDITING
 240 #define CONFIG_VERSION_VARIABLE
 241 #define CONFIG_TIMESTAMP
 242
 243 /* EDMA3 */
 244 #define CONFIG_TI_EDMA3
 245
 246 #define CONFIG_BOOTDELAY                3
 247 #define CONFIG_BOOTFILE                 "uImage"
 248 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 249         CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS                             \
 250         "boot=ubi\0"                                                    \
 251         "tftp_root=/\0"                                                 \
 252         "nfs_root=/export\0"                                            \
 253         "mem_lpae=1\0"                                                  \
 254         "mem_reserve=512M\0"                                            \
 255         "addr_fdt=0x87000000\0"                                         \
 256         "addr_kern=0x88000000\0"                                        \
 257         "addr_uboot=0x87000000\0"                                       \
 258         "addr_fs=0x82000000\0"                                          \
 259         "addr_ubi=0x82000000\0"                                         \
 260         "addr_secdb_key=0xc000000\0"                                    \
 261         "fdt_high=0xffffffff\0"                                         \
 262         "name_kern=uImage-keystone-evm.bin\0"                           \
 263         "run_mon=mon_install ${addr_mon}\0"                             \
 264         "run_kern=bootm ${addr_kern} - ${addr_fdt}\0"                   \
 265         "init_net=run args_all args_net\0"                              \
 266         "init_ubi=run args_all args_ubi; "                              \
 267                 "ubi part ubifs; ubifsmount ubi:boot;"                  \
 268                 "ubifsload ${addr_secdb_key} securedb.key.bin;\0"       \
 269         "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0"       \
 270         "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0"               \
 271         "get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0"    \
 272         "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0"            \
 273         "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"       \
 274         "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0"               \
 275         "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \
 276         "burn_uboot_spi=sf probe; sf erase 0 0x100000; "                \
 277                 "sf write ${addr_uboot} 0 ${filesize}\0"                \
 278         "burn_uboot_nand=nand erase 0 0x100000; "                       \
 279                 "nand write ${addr_uboot} 0 ${filesize}\0"              \
 280         "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0"  \
 281         "args_net=setenv bootargs ${bootargs} rootfstype=nfs "          \
 282                 "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root},"     \
 283                 "${nfs_options} ip=dhcp\0"                              \
 284         "nfs_options=v3,tcp,rsize=4096,wsize=4096\0"                    \
 285         "get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0"     \
 286         "get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0"  \
 287         "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"     \
 288         "get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0"        \
 289         "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0"       \
 290         "burn_ubi=nand erase.part ubifs; "                              \
 291                 "nand write ${addr_ubi} ubifs ${filesize}\0"            \
 292         "init_ramfs=run args_all args_ramfs get_fs_ramfs\0"             \
 293         "args_ramfs=setenv bootargs ${bootargs} "                       \
 294                 "rdinit=/sbin/init rw root=/dev/ram0 "                  \
 295                 "initrd=0x802000000,9M\0"                               \
 296         "no_post=1\0"                                                   \
 297         "mtdparts=mtdparts=davinci_nand.0:"                             \
 298                 "1024k(bootloader)ro,512k(params)ro,-(ubifs)\0"
 299
 300 #define CONFIG_BOOTCOMMAND                                              \
 301         "run init_${boot} get_fdt_${boot} get_mon_${boot} "             \
 302                 "get_kern_${boot} run_mon run_kern"
 303
 304 #define CONFIG_BOOTARGS                                                 \
 305
 306 /* Linux interfacing */
 307 #define CONFIG_CMDLINE_TAG
 308 #define CONFIG_SETUP_MEMORY_TAGS
 309 #define CONFIG_OF_LIBFDT                1
 310 #define CONFIG_OF_BOARD_SETUP
 311 #define CONFIG_SYS_BARGSIZE             1024
 312 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x08000000)
 313 #define CONFIG_LINUX_BOOT_PARAM_ADDR    (CONFIG_SYS_SDRAM_BASE + 0x100)
 314
 315 #define CONFIG_SUPPORT_RAW_INITRD
 316
 317 /* we may include files below only after all above definitions */
 318 #include <asm/arch/hardware.h>
 319 #include <asm/arch/clock.h>
 320 #define CONFIG_SYS_HZ_CLOCK             clk_get_rate(KS2_CLK1_6)
 321
 322 #endif /* __CONFIG_KS2_EVM_H */