ARM: kp_imx53: config: Do not use ${boardtype} to setup update wic file
[platform/kernel/u-boot.git] / include / configs / kp_imx53.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2018
4  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
5  */
6
7 #ifndef __CONFIG_H_
8 #define __CONFIG_H_
9
10 #include <asm/arch/imx-regs.h>
11 #include <linux/sizes.h>
12
13 #define CONFIG_SYS_FSL_CLK
14
15 /* Size of malloc() pool */
16 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
17
18 /* USB Configs */
19 #define CONFIG_USB_EHCI_MX5
20 #define CONFIG_MXC_USB_PORT     1
21 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
22 #define CONFIG_MXC_USB_FLAGS    0
23
24 #define CONFIG_SYS_I2C_MXC
25 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
26 #define CONFIG_SYS_EEPROM_BUS_NUM 1
27 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
28
29 /* allow to overwrite serial and ethaddr */
30 #define CONFIG_ENV_OVERWRITE
31
32 /* Command definition */
33 #define CONFIG_LOADADDR         0x72000000      /* loadaddr env var */
34
35 #define CONFIG_EXTRA_ENV_SETTINGS \
36         "console=ttymxc1,115200\0"      \
37         "fdt_addr=0x75000000\0"         \
38         "fdt_high=0xffffffff\0"         \
39         "scriptaddr=0x74000000\0"       \
40         "kernel_file=fitImage\0"\
41         "silent=1\0"\
42         "rdinit=/sbin/init\0" \
43         "addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit} ${debug} \0" \
44         "upd_image=st.4k\0" \
45         "uboot_file=u-boot.imx\0" \
46         "updargs=setenv bootargs console=${console} ${smp}"\
47                "rdinit=${rdinit} ${debug} ${displayargs}\0" \
48         "loadusb=usb start; " \
49                "fatload usb 0 ${loadaddr} ${upd_image}\0" \
50         "up=if tftp ${loadaddr} ${uboot_file}; then " \
51                "setexpr blkc ${filesize} / 0x200; " \
52                "setexpr blkc ${blkc} + 1; " \
53                "mmc write ${loadaddr} 0x2 ${blkc}" \
54         "; fi\0"          \
55         "upwic=setenv wic_file kp-image-kp${boardsoc}.wic; "\
56                "if tftp ${loadaddr} ${wic_file}; then " \
57                "setexpr blkc ${filesize} / 0x200; " \
58                "setexpr blkc ${blkc} + 1; " \
59                "mmc write ${loadaddr} 0x0 ${blkc}" \
60         "; fi\0"          \
61         "usbupd=echo Booting update from usb ...; " \
62                "setenv bootargs; " \
63                "run updargs; " \
64                "run loadusb; " \
65                "bootm ${loadaddr}#${fit_config}\0" \
66         BOOTENV
67
68 #define CONFIG_BOOTCOMMAND              "run usbupd; run distro_bootcmd"
69
70 #define BOOT_TARGET_DEVICES(func) \
71         func(MMC, mmc, 0) \
72         func(DHCP, dhcp, na)
73
74 #include <config_distro_bootcmd.h>
75
76 #define CONFIG_ARP_TIMEOUT      200UL
77
78 /* Miscellaneous configurable options */
79 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
80 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
81
82 /* Physical Memory Map */
83 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
84 #define PHYS_SDRAM_1_SIZE               (512 * SZ_1M)
85 #define PHYS_SDRAM_SIZE         (PHYS_SDRAM_1_SIZE)
86
87 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
88 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
89 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
90
91 #define CONFIG_SYS_INIT_SP_OFFSET \
92         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
93 #define CONFIG_SYS_INIT_SP_ADDR \
94         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
95
96 /* environment organization */
97 #define CONFIG_ENV_OFFSET      (SZ_1M)
98 #define CONFIG_ENV_SIZE        (SZ_8K)
99 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
100 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
101 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
102 #define CONFIG_SYS_MMC_ENV_DEV 0
103
104 #endif                          /* __CONFIG_H_ */