include/configs/kontron_sl28.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2
   3 #ifndef __SL28_CONFIG_H
   4 #define __SL28_CONFIG_H
   5
   6 #include <asm/arch/stream_id_lsch3.h>
   7 #include <asm/arch/config.h>
   8 #include <asm/arch/soc.h>
   9
  10 /* we don't use hwconfig but this has to be defined.. */
  11 #define HWCONFIG_BUFFER_SIZE 256
  12
  13 /* we don't have secure memory unless we have a BL31 */
  14 #ifndef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
  15 #undef CFG_SYS_MEM_RESERVE_SECURE
  16 #endif
  17
  18 #define CFG_SYS_DDR_SDRAM_BASE  0x80000000
  19 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY  0
  20 #define CFG_SYS_SDRAM_BASE              CFG_SYS_DDR_SDRAM_BASE
  21 #define CFG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL
  22
  23 /* early stack pointer */
  24
  25 /* SMP */
  26 #define CPU_RELEASE_ADDR                secondary_boot_addr
  27
  28 /* generic timer */
  29
  30 /* early heap for SPL DM */
  31 #define CFG_MALLOC_F_ADDR               CFG_SYS_FSL_OCRAM_BASE
  32
  33 /* serial port */
  34 #define CFG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
  35
  36 /* SPL */
  37
  38 /* GUID for capsule updatable firmware image */
  39 #define KONTRON_SL28_FIT_IMAGE_GUID \
  40         EFI_GUID(0x86ebd44f, 0xfeb8, 0x466f, 0x8b, 0xb8, \
  41                  0x89, 0x06, 0x18, 0x45, 0x6d, 0x8b)
  42
  43 /* environment */
  44 /* see include/configs/ti_armv7_common.h */
  45 #define ENV_MEM_LAYOUT_SETTINGS \
  46         "loadaddr=0x82000000\0" \
  47         "kernel_addr_r=0x82000000\0" \
  48         "fdt_addr_r=0x88000000\0" \
  49         "bootm_size=0x10000000\0" \
  50         "pxefile_addr_r=0x80100000\0" \
  51         "scriptaddr=0x80000000\0" \
  52         "ramdisk_addr_r=0x88080000\0"
  53
  54 #define BOOT_TARGET_DEVICES(func) \
  55         func(MMC, mmc, 0) \
  56         func(MMC, mmc, 1) \
  57         func(NVME, nvme, 0) \
  58         func(USB, usb, 0) \
  59         func(SCSI, scsi, 0) \
  60         func(DHCP, dhcp, 0) \
  61         func(PXE, pxe, 0)
  62 #include <config_distro_bootcmd.h>
  63
  64 #define CFG_EXTRA_ENV_SETTINGS \
  65         "env_addr=0x203e0004\0" \
  66         "envload=env import -d -b ${env_addr}\0" \
  67         "install_rcw=source 20200000\0" \
  68         "fdtfile=freescale/fsl-ls1028a-kontron-sl28.dtb\0" \
  69         "dfu_alt_info=sf 0:0=u-boot-bin raw 0x210000 0x1d0000;" \
  70                             "u-boot-env raw 0x3e0000 0x20000\0" \
  71         ENV_MEM_LAYOUT_SETTINGS \
  72         BOOTENV
  73
  74 #endif /* __SL28_CONFIG_H */