1 /* SPDX-License-Identifier: GPL-2.0+ */
6 #include <asm/arch/stream_id_lsch3.h>
7 #include <asm/arch/config.h>
8 #include <asm/arch/soc.h>
10 /* we don't use hwconfig but this has to be defined.. */
11 #define HWCONFIG_BUFFER_SIZE 256
13 /* we don't have secure memory unless we have a BL31 */
14 #ifndef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
15 #undef CONFIG_SYS_MEM_RESERVE_SECURE
19 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef
21 #define CONFIG_VERY_BIG_RAM
22 #define CONFIG_CHIP_SELECTS_PER_CTRL 4
23 #define CONFIG_DIMM_SLOTS_PER_CTLR 1
24 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
25 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
26 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
27 #define CONFIG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL
28 #define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1
30 /* early stack pointer */
31 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xeff0)
34 #define CONFIG_SYS_MEMTEST_START 0x80000000
35 #define CONFIG_SYS_MEMTEST_END 0x9fffffff
38 #define CPU_RELEASE_ADDR secondary_boot_addr
41 #define COUNTER_FREQUENCY 25000000
43 /* early heap for SPL DM */
44 #define CONFIG_MALLOC_F_ADDR CONFIG_SYS_FSL_OCRAM_BASE
47 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
49 #define CONFIG_SYS_CLK_FREQ 100000000
50 #define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4)
53 #define CONFIG_SYS_RX_ETH_BUFFER 8
56 #define CONFIG_SPL_BSS_START_ADDR 0x80100000
57 #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
58 #define CONFIG_SPL_MAX_SIZE 0x20000
59 #define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
61 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000
62 #define CONFIG_SYS_SPL_MALLOC_START 0x80200000
63 #define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
66 /* see include/configs/ti_armv7_common.h */
67 #define ENV_MEM_LAYOUT_SETTINGS \
68 "loadaddr=0x82000000\0" \
69 "kernel_addr_r=0x82000000\0" \
70 "fdt_addr_r=0x88000000\0" \
71 "bootm_size=0x10000000\0" \
72 "pxefile_addr_r=0x80100000\0" \
73 "scriptaddr=0x80000000\0" \
74 "ramdisk_addr_r=0x88080000\0"
76 #define BOOT_TARGET_DEVICES(func) \
84 #include <config_distro_bootcmd.h>
86 #define CONFIG_EXTRA_ENV_SETTINGS \
87 "env_addr=0x203e0004\0" \
88 "envload=env import -d -b ${env_addr}\0" \
89 "install_rcw=source 20200000\0" \
90 "fdtfile=freescale/fsl-ls1028a-kontron-sl28.dtb\0" \
91 ENV_MEM_LAYOUT_SETTINGS \