1 /* SPDX-License-Identifier: GPL-2.0+ */
3 #ifndef __KONTRON_PITX_IMX8M_H
4 #define __KONTRON_PITX_IMX8M_H
6 #include <linux/sizes.h>
7 #include <linux/stringify.h>
8 #include <asm/arch/imx-regs.h>
10 #define CONFIG_SYS_MONITOR_LEN (512 * SZ_1K)
12 /* GUID for capsule updatable firmware image */
13 #define KONTRON_PITX_IMX8M_FIT_IMAGE_GUID \
14 EFI_GUID(0xc898e959, 0x5b1f, 0x4e6d, 0x88, 0xe0, \
15 0x40, 0xd4, 0x5c, 0xca, 0x13, 0x99)
17 #ifdef CONFIG_SPL_BUILD
18 #define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000
20 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
21 #define CONFIG_MALLOC_F_ADDR 0x182000
22 /* For RAW image gives a error info not panic */
25 #define CONFIG_POWER_PFUZE100
26 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
30 #if defined(CONFIG_CMD_NET)
31 #define CONFIG_FEC_MXC_PHYADDR 0
33 #define PHY_ANEG_TIMEOUT 20000
37 #define ENV_MEM_LAYOUT_SETTINGS \
38 "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
39 "kernel_addr_r=0x42000000\0" \
40 "fdt_addr_r=0x48000000\0" \
41 "fdtoverlay_addr_r=0x49000000\0" \
42 "ramdisk_addr_r=0x48080000\0" \
43 "scriptaddr=0x40000000\0" \
44 "pxefile_addr_r=0x40100000\0"
46 #define BOOT_TARGET_DEVICES(func) \
50 func(DHCP, dhcp, na) \
53 #include <config_distro_bootcmd.h>
55 /* Initial environment variables */
56 #define CONFIG_EXTRA_ENV_SETTINGS \
58 "console=ttymxc2,115200\0" \
60 "fdtfile=freescale/imx8mq-kontron-pitx-imx8m.dtb\0" \
61 "dfu_alt_info=mmc 0=flash-bin raw 0x42 0x1000 mmcpart 1\0"\
62 ENV_MEM_LAYOUT_SETTINGS \
66 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
67 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000
69 #define CONFIG_SYS_SDRAM_BASE 0x40000000
70 #define PHYS_SDRAM 0x40000000
71 #define PHYS_SDRAM_SIZE 0xC0000000 /* 3GB DDR */
73 #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(3)
75 #define CONFIG_SYS_FSL_USDHC_NUM 2
76 #define CONFIG_SYS_FSL_ESDHC_ADDR 0