include/configs/kontron_pitx_imx8m.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2
   3 #ifndef __KONTRON_PITX_IMX8M_H
   4 #define __KONTRON_PITX_IMX8M_H
   5
   6 #include <linux/sizes.h>
   7 #include <linux/stringify.h>
   8 #include <asm/arch/imx-regs.h>
   9
  10 #define CONFIG_SYS_MONITOR_LEN          (512 * SZ_1K)
  11
  12 /* GUID for capsule updatable firmware image */
  13 #define KONTRON_PITX_IMX8M_FIT_IMAGE_GUID \
  14         EFI_GUID(0xc898e959, 0x5b1f, 0x4e6d, 0x88, 0xe0, \
  15                  0x40, 0xd4, 0x5c, 0xca, 0x13, 0x99)
  16
  17 #ifdef CONFIG_SPL_BUILD
  18 #define CONFIG_SYS_SPL_PTE_RAM_BASE     0x41580000
  19
  20 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
  21 #define CONFIG_MALLOC_F_ADDR            0x182000
  22 /* For RAW image gives a error info not panic */
  23
  24
  25 #define CONFIG_POWER_PFUZE100
  26 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  27 #endif
  28
  29 /* ENET1 Config */
  30 #if defined(CONFIG_CMD_NET)
  31 #define CONFIG_FEC_MXC_PHYADDR          0
  32
  33 #define PHY_ANEG_TIMEOUT                20000
  34
  35 #endif
  36
  37 #define ENV_MEM_LAYOUT_SETTINGS \
  38         "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  39         "kernel_addr_r=0x42000000\0" \
  40         "fdt_addr_r=0x48000000\0" \
  41         "fdtoverlay_addr_r=0x49000000\0" \
  42         "ramdisk_addr_r=0x48080000\0" \
  43         "scriptaddr=0x40000000\0" \
  44         "pxefile_addr_r=0x40100000\0"
  45
  46 #define BOOT_TARGET_DEVICES(func) \
  47         func(MMC, mmc, 0) \
  48         func(MMC, mmc, 1) \
  49         func(USB, usb, 0) \
  50         func(DHCP, dhcp, na) \
  51         func(PXE, pxe, 0)
  52
  53 #include <config_distro_bootcmd.h>
  54
  55 /* Initial environment variables */
  56 #define CONFIG_EXTRA_ENV_SETTINGS               \
  57         "image=Image\0" \
  58         "console=ttymxc2,115200\0" \
  59         "boot_fdt=try\0" \
  60         "fdtfile=freescale/imx8mq-kontron-pitx-imx8m.dtb\0" \
  61         "dfu_alt_info=mmc 0=flash-bin raw 0x42 0x1000 mmcpart 1\0"\
  62         ENV_MEM_LAYOUT_SETTINGS \
  63         BOOTENV
  64
  65
  66 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
  67 #define CONFIG_SYS_INIT_RAM_SIZE        0x80000
  68
  69 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  70 #define PHYS_SDRAM                      0x40000000
  71 #define PHYS_SDRAM_SIZE                 0xC0000000 /* 3GB DDR */
  72
  73 #define CONFIG_MXC_UART_BASE            UART_BASE_ADDR(3)
  74
  75 #define CONFIG_SYS_FSL_USDHC_NUM        2
  76 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  77
  78 #endif