Merge branch 'master' of git://git.denx.de/u-boot-i2c
[platform/kernel/u-boot.git] / include / configs / km_kirkwood.h
1 /*
2  * (C) Copyright 2009
3  * Marvell Semiconductor <www.marvell.com>
4  * Prafulla Wadaskar <prafulla@marvell.com>
5  *
6  * (C) Copyright 2009
7  * Stefan Roese, DENX Software Engineering, sr@denx.de.
8  *
9  * (C) Copyright 2011-2012
10  * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
11  * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
12  *
13  * SPDX-License-Identifier:     GPL-2.0+
14  */
15
16 /*
17  * for linking errors see
18  * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
19  */
20
21 #ifndef _CONFIG_KM_KIRKWOOD_H
22 #define _CONFIG_KM_KIRKWOOD_H
23
24 /* KM_KIRKWOOD */
25 #if defined(CONFIG_KM_KIRKWOOD)
26 #define CONFIG_IDENT_STRING             "\nKeymile Kirkwood"
27 #define CONFIG_HOSTNAME                 km_kirkwood
28 #define CONFIG_KM_DISABLE_PCIE
29 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
30
31 /* KM_KIRKWOOD_PCI */
32 #elif defined(CONFIG_KM_KIRKWOOD_PCI)
33 #define CONFIG_IDENT_STRING             "\nKeymile Kirkwood PCI"
34 #define CONFIG_HOSTNAME                 km_kirkwood_pci
35 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
36 #define CONFIG_KM_FPGA_CONFIG
37
38 /* KM_NUSA */
39 #elif defined(CONFIG_KM_NUSA)
40 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
41 #define CONFIG_IDENT_STRING             "\nKeymile NUSA"
42 #define CONFIG_HOSTNAME                 kmnusa
43 #undef CONFIG_SYS_KWD_CONFIG
44 #define CONFIG_SYS_KWD_CONFIG \
45                 $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
46 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
47 #define CONFIG_KM_FPGA_CONFIG
48 #define CONFIG_KM_PIGGY4_88E6352
49 #define CONFIG_MV88E6352_SWITCH
50 #define CONFIG_KM_MVEXTSW_ADDR          0x10
51
52 /* KM_MGCOGE3UN */
53 #elif defined(CONFIG_KM_MGCOGE3UN)
54 #define CONFIG_IDENT_STRING             "\nKeymile COGE3UN"
55 #define CONFIG_HOSTNAME                 mgcoge3un
56 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
57 #undef CONFIG_SYS_KWD_CONFIG
58 #define CONFIG_SYS_KWD_CONFIG \
59                 $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
60 #define CONFIG_KM_BOARD_EXTRA_ENV       "waitforne=true\0"
61 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET  3
62 #define CONFIG_KM_DISABLE_PCIE
63 #define CONFIG_KM_PIGGY4_88E6061
64
65 /* KMCOGE5UN */
66 #elif defined(CONFIG_KM_COGE5UN)
67 #define CONFIG_IDENT_STRING             "\nKeymile COGE5UN"
68 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
69 #undef  CONFIG_SYS_KWD_CONFIG
70 #define CONFIG_SYS_KWD_CONFIG \
71                 $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
72 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
73 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET  3
74 #define CONFIG_HOSTNAME                 kmcoge5un
75 #define CONFIG_KM_DISABLE_PCIE
76 #define CONFIG_KM_PIGGY4_88E6352
77
78 /* KM_PORTL2 */
79 #elif defined(CONFIG_KM_PORTL2)
80 #define CONFIG_IDENT_STRING             "\nKeymile Port-L2"
81 #define CONFIG_HOSTNAME                 portl2
82 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
83 #define CONFIG_KM_PIGGY4_88E6061
84
85 /* KM_SUV31 */
86 #elif defined(CONFIG_KM_SUV31)
87 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
88 #define CONFIG_IDENT_STRING             "\nKeymile SUV31"
89 #define CONFIG_HOSTNAME                 kmsuv31
90 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
91 #define CONFIG_KM_FPGA_CONFIG
92
93 #else
94 #error ("Board unsupported")
95 #endif
96
97 /* include common defines/options for all arm based Keymile boards */
98 #include "km/km_arm.h"
99
100 #ifndef CONFIG_KM_ENV_IS_IN_SPI_NOR
101 #define KM_ENV_BUS      5       /* I2C2 (Mux-Port 5)*/
102 #endif
103
104 #if defined(CONFIG_KM_PIGGY4_88E6352)
105 /*
106  * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
107  * an Marvell 88E6352 simple switch.
108  * In this case we have to change the default settings for the etherent mac.
109  * There is NO ethernet phy. The ARM and Switch are conencted directly over
110  * RGMII in MAC-MAC mode
111  * In this case 1GBit full duplex and autoneg off
112  */
113 #define PORT_SERIAL_CONTROL_VALUE               ( \
114         MVGBE_FORCE_LINK_PASS                       | \
115         MVGBE_DIS_AUTO_NEG_FOR_DUPLX            | \
116         MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL        | \
117         MVGBE_ADV_NO_FLOW_CTRL                      | \
118         MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX     | \
119         MVGBE_FORCE_BP_MODE_NO_JAM                  | \
120         (1 << 9) /* Reserved bit has to be 1 */ | \
121         MVGBE_DO_NOT_FORCE_LINK_FAIL            | \
122         MVGBE_DIS_AUTO_NEG_SPEED_GMII           | \
123         MVGBE_DTE_ADV_0                                 | \
124         MVGBE_MIIPHY_MAC_MODE                       | \
125         MVGBE_AUTO_NEG_NO_CHANGE                    | \
126         MVGBE_MAX_RX_PACKET_1552BYTE            | \
127         MVGBE_CLR_EXT_LOOPBACK                      | \
128         MVGBE_SET_FULL_DUPLEX_MODE                  | \
129         MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
130         MVGBE_SET_GMII_SPEED_TO_1000        |\
131         MVGBE_SET_MII_SPEED_TO_100)
132
133 #endif
134
135 #ifdef CONFIG_KM_PIGGY4_88E6061
136 /*
137  * Some keymile boards like mgcoge3un have their PIGGY4 connected via
138  * an Marvell 88E6061 simple switch.
139  * In this case we have to change the default settings for the
140  * ethernet phy connected to the kirkwood.
141  * In this case 100MB full duplex and autoneg off
142  */
143 #define PORT_SERIAL_CONTROL_VALUE               ( \
144         MVGBE_FORCE_LINK_PASS                   | \
145         MVGBE_DIS_AUTO_NEG_FOR_DUPLX            | \
146         MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL        | \
147         MVGBE_ADV_NO_FLOW_CTRL                  | \
148         MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX     | \
149         MVGBE_FORCE_BP_MODE_NO_JAM              | \
150         (1 << 9) /* Reserved bit has to be 1 */ | \
151         MVGBE_DO_NOT_FORCE_LINK_FAIL            | \
152         MVGBE_DIS_AUTO_NEG_SPEED_GMII           | \
153         MVGBE_DTE_ADV_0                         | \
154         MVGBE_MIIPHY_MAC_MODE                   | \
155         MVGBE_AUTO_NEG_NO_CHANGE                | \
156         MVGBE_MAX_RX_PACKET_1552BYTE            | \
157         MVGBE_CLR_EXT_LOOPBACK                  | \
158         MVGBE_SET_FULL_DUPLEX_MODE              | \
159         MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX        |\
160         MVGBE_SET_GMII_SPEED_TO_10_100  |\
161         MVGBE_SET_MII_SPEED_TO_100)
162 #endif
163
164 #ifdef CONFIG_KM_DISABLE_PCI
165 #undef  CONFIG_KIRKWOOD_PCIE_INIT
166 #endif
167
168
169 #endif /* _CONFIG_KM_KIRKWOOD */