include/configs/km_kirkwood.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2009
   4  * Marvell Semiconductor <www.marvell.com>
   5  * Prafulla Wadaskar <prafulla@marvell.com>
   6  *
   7  * (C) Copyright 2009
   8  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   9  *
  10  * (C) Copyright 2011-2012
  11  * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
  12  * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
  13  */
  14
  15 /*
  16  * for linking errors see
  17  * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
  18  */
  19
  20 #ifndef _CONFIG_KM_KIRKWOOD_H
  21 #define _CONFIG_KM_KIRKWOOD_H
  22
  23 /* KM_KIRKWOOD */
  24 #if defined(CONFIG_KM_KIRKWOOD)
  25 #define CONFIG_HOSTNAME                 "km_kirkwood"
  26 #define CONFIG_KM_DISABLE_PCIE
  27 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  28
  29 /* KM_KIRKWOOD_PCI */
  30 #elif defined(CONFIG_KM_KIRKWOOD_PCI)
  31 #define CONFIG_HOSTNAME                 "km_kirkwood_pci"
  32 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  33 #define CONFIG_KM_FPGA_CONFIG
  34 #define CONFIG_KM_UBI_PART_BOOT_OPTS            ",2048"
  35 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
  36
  37 /* KM_KIRKWOOD_128M16 */
  38 #elif defined(CONFIG_KM_KIRKWOOD_128M16)
  39 #define CONFIG_HOSTNAME                 "km_kirkwood_128m16"
  40 #undef CONFIG_SYS_KWD_CONFIG
  41 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
  42 #define CONFIG_KM_DISABLE_PCIE
  43 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  44
  45 /* KM_NUSA / KM_SUGP1 */
  46 #elif defined(CONFIG_KM_NUSA) || defined(CONFIG_KM_SUGP1)
  47 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  48
  49 # if defined(CONFIG_KM_NUSA)
  50 #define CONFIG_HOSTNAME                 "kmnusa"
  51 # elif defined(CONFIG_KM_SUGP1)
  52 #define CONFIG_HOSTNAME                 "kmsugp1"
  53 #define KM_PCIE_RESET_MPP7
  54 #endif
  55
  56 #undef CONFIG_SYS_KWD_CONFIG
  57 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
  58 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
  59 #define CONFIG_KM_FPGA_CONFIG
  60 #define CONFIG_KM_PIGGY4_88E6352
  61 #define CONFIG_MV88E6352_SWITCH
  62 #define CONFIG_KM_MVEXTSW_ADDR          0x10
  63
  64 /* KM_MGCOGE3UN */
  65 #elif defined(CONFIG_KM_MGCOGE3UN)
  66 #define CONFIG_HOSTNAME                 "mgcoge3un"
  67 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  68 #undef CONFIG_SYS_KWD_CONFIG
  69 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
  70 #define CONFIG_KM_BOARD_EXTRA_ENV       "waitforne=true\0"
  71 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET  3
  72 #define CONFIG_KM_DISABLE_PCIE
  73 #define CONFIG_KM_PIGGY4_88E6061
  74
  75 /* KMCOGE5UN */
  76 #elif defined(CONFIG_KM_COGE5UN)
  77 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  78 #undef  CONFIG_SYS_KWD_CONFIG
  79 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
  80 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
  81 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET  3
  82 #define CONFIG_HOSTNAME                 "kmcoge5un"
  83 #define CONFIG_KM_DISABLE_PCIE
  84 #define CONFIG_KM_PIGGY4_88E6352
  85
  86 /* KM_PORTL2 */
  87 #elif defined(CONFIG_KM_PORTL2)
  88 #define CONFIG_HOSTNAME                 "portl2"
  89 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  90 #define CONFIG_KM_PIGGY4_88E6061
  91
  92 /* KM_SUV31 */
  93 #elif defined(CONFIG_KM_SUV31)
  94 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  95 #define CONFIG_HOSTNAME                 "kmsuv31"
  96 #undef CONFIG_SYS_KWD_CONFIG
  97 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
  98 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
  99 #define CONFIG_KM_FPGA_CONFIG
 100 #define CONFIG_KM_UBI_PART_BOOT_OPTS            ",2048"
 101 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
 102 #else
 103 #error ("Board unsupported")
 104 #endif
 105
 106 /* include common defines/options for all arm based Keymile boards */
 107 #include "km/km_arm.h"
 108
 109 #if defined(CONFIG_KM_PIGGY4_88E6352)
 110 /*
 111  * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
 112  * an Marvell 88E6352 simple switch.
 113  * In this case we have to change the default settings for the etherent mac.
 114  * There is NO ethernet phy. The ARM and Switch are conencted directly over
 115  * RGMII in MAC-MAC mode
 116  * In this case 1GBit full duplex and autoneg off
 117  */
 118 #define PORT_SERIAL_CONTROL_VALUE               ( \
 119         MVGBE_FORCE_LINK_PASS                       | \
 120         MVGBE_DIS_AUTO_NEG_FOR_DUPLX            | \
 121         MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL        | \
 122         MVGBE_ADV_NO_FLOW_CTRL                      | \
 123         MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX     | \
 124         MVGBE_FORCE_BP_MODE_NO_JAM                  | \
 125         (1 << 9) /* Reserved bit has to be 1 */ | \
 126         MVGBE_DO_NOT_FORCE_LINK_FAIL            | \
 127         MVGBE_DIS_AUTO_NEG_SPEED_GMII           | \
 128         MVGBE_DTE_ADV_0                                 | \
 129         MVGBE_MIIPHY_MAC_MODE                       | \
 130         MVGBE_AUTO_NEG_NO_CHANGE                    | \
 131         MVGBE_MAX_RX_PACKET_1552BYTE            | \
 132         MVGBE_CLR_EXT_LOOPBACK                      | \
 133         MVGBE_SET_FULL_DUPLEX_MODE                  | \
 134         MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
 135         MVGBE_SET_GMII_SPEED_TO_1000        |\
 136         MVGBE_SET_MII_SPEED_TO_100)
 137
 138 #endif
 139
 140 #ifdef CONFIG_KM_PIGGY4_88E6061
 141 /*
 142  * Some keymile boards like mgcoge3un have their PIGGY4 connected via
 143  * an Marvell 88E6061 simple switch.
 144  * In this case we have to change the default settings for the
 145  * ethernet phy connected to the kirkwood.
 146  * In this case 100MB full duplex and autoneg off
 147  */
 148 #define PORT_SERIAL_CONTROL_VALUE               ( \
 149         MVGBE_FORCE_LINK_PASS                   | \
 150         MVGBE_DIS_AUTO_NEG_FOR_DUPLX            | \
 151         MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL        | \
 152         MVGBE_ADV_NO_FLOW_CTRL                  | \
 153         MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX     | \
 154         MVGBE_FORCE_BP_MODE_NO_JAM              | \
 155         (1 << 9) /* Reserved bit has to be 1 */ | \
 156         MVGBE_DO_NOT_FORCE_LINK_FAIL            | \
 157         MVGBE_DIS_AUTO_NEG_SPEED_GMII           | \
 158         MVGBE_DTE_ADV_0                         | \
 159         MVGBE_MIIPHY_MAC_MODE                   | \
 160         MVGBE_AUTO_NEG_NO_CHANGE                | \
 161         MVGBE_MAX_RX_PACKET_1552BYTE            | \
 162         MVGBE_CLR_EXT_LOOPBACK                  | \
 163         MVGBE_SET_FULL_DUPLEX_MODE              | \
 164         MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX        |\
 165         MVGBE_SET_GMII_SPEED_TO_10_100  |\
 166         MVGBE_SET_MII_SPEED_TO_100)
 167 #endif
 168
 169 #ifdef CONFIG_KM_DISABLE_PCI
 170 #undef  CONFIG_KIRKWOOD_PCIE_INIT
 171 #endif
 172
 173 #endif /* _CONFIG_KM_KIRKWOOD */