Merge branch '2019-05-24-master-imports'
[platform/kernel/u-boot.git] / include / configs / km_kirkwood.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2009
4  * Marvell Semiconductor <www.marvell.com>
5  * Prafulla Wadaskar <prafulla@marvell.com>
6  *
7  * (C) Copyright 2009
8  * Stefan Roese, DENX Software Engineering, sr@denx.de.
9  *
10  * (C) Copyright 2011-2012
11  * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
12  * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
13  */
14
15 /*
16  * for linking errors see
17  * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
18  */
19
20 #ifndef _CONFIG_KM_KIRKWOOD_H
21 #define _CONFIG_KM_KIRKWOOD_H
22
23 /* KM_KIRKWOOD */
24 #if defined(CONFIG_KM_KIRKWOOD)
25 #define CONFIG_HOSTNAME                 "km_kirkwood"
26 #define CONFIG_KM_DISABLE_PCIE
27 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
28
29 /* KM_KIRKWOOD_PCI */
30 #elif defined(CONFIG_KM_KIRKWOOD_PCI)
31 #define CONFIG_HOSTNAME                 "km_kirkwood_pci"
32 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
33 #define CONFIG_KM_FPGA_CONFIG
34 #define CONFIG_KM_UBI_PART_BOOT_OPTS            ",2048"
35 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
36
37 /* KM_KIRKWOOD_128M16 */
38 #elif defined(CONFIG_KM_KIRKWOOD_128M16)
39 #define CONFIG_HOSTNAME                 "km_kirkwood_128m16"
40 #undef CONFIG_SYS_KWD_CONFIG
41 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
42 #define CONFIG_KM_DISABLE_PCIE
43 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
44
45 /* KM_NUSA / KM_SUGP1 */
46 #elif defined(CONFIG_KM_NUSA) || defined(CONFIG_KM_SUGP1)
47 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
48
49 # if defined(CONFIG_KM_NUSA)
50 #define CONFIG_HOSTNAME                 "kmnusa"
51 # elif defined(CONFIG_KM_SUGP1)
52 #define CONFIG_HOSTNAME                 "kmsugp1"
53 #define KM_PCIE_RESET_MPP7
54 #endif
55
56 #undef CONFIG_SYS_KWD_CONFIG
57 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
58 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
59 #define CONFIG_KM_FPGA_CONFIG
60 #define CONFIG_KM_PIGGY4_88E6352
61 #define CONFIG_MV88E6352_SWITCH
62 #define CONFIG_KM_MVEXTSW_ADDR          0x10
63
64 /* KM_MGCOGE3UN */
65 #elif defined(CONFIG_KM_MGCOGE3UN)
66 #define CONFIG_HOSTNAME                 "mgcoge3un"
67 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
68 #undef CONFIG_SYS_KWD_CONFIG
69 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
70 #define CONFIG_KM_BOARD_EXTRA_ENV       "waitforne=true\0"
71 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET  3
72 #define CONFIG_KM_DISABLE_PCIE
73 #define CONFIG_KM_PIGGY4_88E6061
74
75 /* KMCOGE5UN */
76 #elif defined(CONFIG_KM_COGE5UN)
77 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
78 #undef  CONFIG_SYS_KWD_CONFIG
79 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
80 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
81 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET  3
82 #define CONFIG_HOSTNAME                 "kmcoge5un"
83 #define CONFIG_KM_DISABLE_PCIE
84 #define CONFIG_KM_PIGGY4_88E6352
85
86 /* KM_PORTL2 */
87 #elif defined(CONFIG_KM_PORTL2)
88 #define CONFIG_HOSTNAME                 "portl2"
89 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
90 #define CONFIG_KM_PIGGY4_88E6061
91
92 /* KM_SUV31 */
93 #elif defined(CONFIG_KM_SUV31)
94 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
95 #define CONFIG_HOSTNAME                 "kmsuv31"
96 #undef CONFIG_SYS_KWD_CONFIG
97 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
98 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
99 #define CONFIG_KM_FPGA_CONFIG
100 #define CONFIG_KM_UBI_PART_BOOT_OPTS            ",2048"
101 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
102 #else
103 #error ("Board unsupported")
104 #endif
105
106 /* include common defines/options for all arm based Keymile boards */
107 #include "km/km_arm.h"
108
109 #if defined(CONFIG_KM_PIGGY4_88E6352)
110 /*
111  * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
112  * an Marvell 88E6352 simple switch.
113  * In this case we have to change the default settings for the etherent mac.
114  * There is NO ethernet phy. The ARM and Switch are conencted directly over
115  * RGMII in MAC-MAC mode
116  * In this case 1GBit full duplex and autoneg off
117  */
118 #define PORT_SERIAL_CONTROL_VALUE               ( \
119         MVGBE_FORCE_LINK_PASS                       | \
120         MVGBE_DIS_AUTO_NEG_FOR_DUPLX            | \
121         MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL        | \
122         MVGBE_ADV_NO_FLOW_CTRL                      | \
123         MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX     | \
124         MVGBE_FORCE_BP_MODE_NO_JAM                  | \
125         (1 << 9) /* Reserved bit has to be 1 */ | \
126         MVGBE_DO_NOT_FORCE_LINK_FAIL            | \
127         MVGBE_DIS_AUTO_NEG_SPEED_GMII           | \
128         MVGBE_DTE_ADV_0                                 | \
129         MVGBE_MIIPHY_MAC_MODE                       | \
130         MVGBE_AUTO_NEG_NO_CHANGE                    | \
131         MVGBE_MAX_RX_PACKET_1552BYTE            | \
132         MVGBE_CLR_EXT_LOOPBACK                      | \
133         MVGBE_SET_FULL_DUPLEX_MODE                  | \
134         MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
135         MVGBE_SET_GMII_SPEED_TO_1000        |\
136         MVGBE_SET_MII_SPEED_TO_100)
137
138 #endif
139
140 #ifdef CONFIG_KM_PIGGY4_88E6061
141 /*
142  * Some keymile boards like mgcoge3un have their PIGGY4 connected via
143  * an Marvell 88E6061 simple switch.
144  * In this case we have to change the default settings for the
145  * ethernet phy connected to the kirkwood.
146  * In this case 100MB full duplex and autoneg off
147  */
148 #define PORT_SERIAL_CONTROL_VALUE               ( \
149         MVGBE_FORCE_LINK_PASS                   | \
150         MVGBE_DIS_AUTO_NEG_FOR_DUPLX            | \
151         MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL        | \
152         MVGBE_ADV_NO_FLOW_CTRL                  | \
153         MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX     | \
154         MVGBE_FORCE_BP_MODE_NO_JAM              | \
155         (1 << 9) /* Reserved bit has to be 1 */ | \
156         MVGBE_DO_NOT_FORCE_LINK_FAIL            | \
157         MVGBE_DIS_AUTO_NEG_SPEED_GMII           | \
158         MVGBE_DTE_ADV_0                         | \
159         MVGBE_MIIPHY_MAC_MODE                   | \
160         MVGBE_AUTO_NEG_NO_CHANGE                | \
161         MVGBE_MAX_RX_PACKET_1552BYTE            | \
162         MVGBE_CLR_EXT_LOOPBACK                  | \
163         MVGBE_SET_FULL_DUPLEX_MODE              | \
164         MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX        |\
165         MVGBE_SET_GMII_SPEED_TO_10_100  |\
166         MVGBE_SET_MII_SPEED_TO_100)
167 #endif
168
169 #ifdef CONFIG_KM_DISABLE_PCI
170 #undef  CONFIG_KIRKWOOD_PCIE_INIT
171 #endif
172
173 #endif /* _CONFIG_KM_KIRKWOOD */