include/configs/km_kirkwood.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2009
   4  * Marvell Semiconductor <www.marvell.com>
   5  * Prafulla Wadaskar <prafulla@marvell.com>
   6  *
   7  * (C) Copyright 2009
   8  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   9  *
  10  * (C) Copyright 2011-2012
  11  * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
  12  * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
  13  */
  14
  15 /*
  16  * for linking errors see
  17  * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
  18  */
  19
  20 #ifndef _CONFIG_KM_KIRKWOOD_H
  21 #define _CONFIG_KM_KIRKWOOD_H
  22
  23 /* KM_KIRKWOOD */
  24 #if defined(CONFIG_KM_KIRKWOOD)
  25 #define CONFIG_HOSTNAME                 "km_kirkwood"
  26 #define CONFIG_KM_DISABLE_PCIE
  27
  28 /* KM_KIRKWOOD_PCI */
  29 #elif defined(CONFIG_KM_KIRKWOOD_PCI)
  30 #define CONFIG_HOSTNAME                 "km_kirkwood_pci"
  31 #define CONFIG_KM_UBI_PART_BOOT_OPTS            ",2048"
  32 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
  33
  34 /* KM_KIRKWOOD_128M16 */
  35 #elif defined(CONFIG_KM_KIRKWOOD_128M16)
  36 #define CONFIG_HOSTNAME                 "km_kirkwood_128m16"
  37 #undef CONFIG_SYS_KWD_CONFIG
  38 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
  39 #define CONFIG_KM_DISABLE_PCIE
  40
  41 /* KM_NUSA */
  42 #elif defined(CONFIG_KM_NUSA)
  43
  44 #define CONFIG_HOSTNAME                 "kmnusa"
  45
  46 #undef CONFIG_SYS_KWD_CONFIG
  47 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
  48
  49 /* KMCOGE5UN */
  50 #elif defined(CONFIG_KM_COGE5UN)
  51 #undef  CONFIG_SYS_KWD_CONFIG
  52 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
  53 #define CONFIG_HOSTNAME                 "kmcoge5un"
  54 #define CONFIG_KM_DISABLE_PCIE
  55
  56 /* KM_SUSE2 */
  57 #elif defined(CONFIG_KM_SUSE2)
  58 #define CONFIG_HOSTNAME                 "kmsuse2"
  59 #undef CONFIG_SYS_KWD_CONFIG
  60 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
  61 #define CONFIG_KM_UBI_PART_BOOT_OPTS            ",2048"
  62 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
  63 #else
  64 #error ("Board unsupported")
  65 #endif
  66
  67 /* include common defines/options for all arm based Keymile boards */
  68 #include "km/km_arm.h"
  69
  70 #if defined(CONFIG_KM_PIGGY4_88E6352)
  71 /*
  72  * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
  73  * an Marvell 88E6352 simple switch.
  74  * In this case we have to change the default settings for the etherent mac.
  75  * There is NO ethernet phy. The ARM and Switch are conencted directly over
  76  * RGMII in MAC-MAC mode
  77  * In this case 1GBit full duplex and autoneg off
  78  */
  79 #define PORT_SERIAL_CONTROL_VALUE               ( \
  80         MVGBE_FORCE_LINK_PASS                       | \
  81         MVGBE_DIS_AUTO_NEG_FOR_DUPLX            | \
  82         MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL        | \
  83         MVGBE_ADV_NO_FLOW_CTRL                      | \
  84         MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX     | \
  85         MVGBE_FORCE_BP_MODE_NO_JAM                  | \
  86         (1 << 9) /* Reserved bit has to be 1 */ | \
  87         MVGBE_DO_NOT_FORCE_LINK_FAIL            | \
  88         MVGBE_DIS_AUTO_NEG_SPEED_GMII           | \
  89         MVGBE_DTE_ADV_0                                 | \
  90         MVGBE_MIIPHY_MAC_MODE                       | \
  91         MVGBE_AUTO_NEG_NO_CHANGE                    | \
  92         MVGBE_MAX_RX_PACKET_1552BYTE            | \
  93         MVGBE_CLR_EXT_LOOPBACK                      | \
  94         MVGBE_SET_FULL_DUPLEX_MODE                  | \
  95         MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
  96         MVGBE_SET_GMII_SPEED_TO_1000        |\
  97         MVGBE_SET_MII_SPEED_TO_100)
  98
  99 #endif
 100
 101 #ifdef CONFIG_KM_PIGGY4_88E6061
 102 /*
 103  * Some keymile boards like mgcoge5un have their PIGGY4 connected via
 104  * an Marvell 88E6061 simple switch.
 105  * In this case we have to change the default settings for the
 106  * ethernet phy connected to the kirkwood.
 107  * In this case 100MB full duplex and autoneg off
 108  */
 109 #define PORT_SERIAL_CONTROL_VALUE               ( \
 110         MVGBE_FORCE_LINK_PASS                   | \
 111         MVGBE_DIS_AUTO_NEG_FOR_DUPLX            | \
 112         MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL        | \
 113         MVGBE_ADV_NO_FLOW_CTRL                  | \
 114         MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX     | \
 115         MVGBE_FORCE_BP_MODE_NO_JAM              | \
 116         (1 << 9) /* Reserved bit has to be 1 */ | \
 117         MVGBE_DO_NOT_FORCE_LINK_FAIL            | \
 118         MVGBE_DIS_AUTO_NEG_SPEED_GMII           | \
 119         MVGBE_DTE_ADV_0                         | \
 120         MVGBE_MIIPHY_MAC_MODE                   | \
 121         MVGBE_AUTO_NEG_NO_CHANGE                | \
 122         MVGBE_MAX_RX_PACKET_1552BYTE            | \
 123         MVGBE_CLR_EXT_LOOPBACK                  | \
 124         MVGBE_SET_FULL_DUPLEX_MODE              | \
 125         MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX        |\
 126         MVGBE_SET_GMII_SPEED_TO_10_100  |\
 127         MVGBE_SET_MII_SPEED_TO_100)
 128 #endif
 129
 130 #ifdef CONFIG_KM_DISABLE_PCIE
 131 #undef  CONFIG_KIRKWOOD_PCIE_INIT
 132 #endif
 133
 134 #endif /* _CONFIG_KM_KIRKWOOD */