include/configs/km_kirkwood.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2009
   4  * Marvell Semiconductor <www.marvell.com>
   5  * Prafulla Wadaskar <prafulla@marvell.com>
   6  *
   7  * (C) Copyright 2009
   8  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   9  *
  10  * (C) Copyright 2011-2012
  11  * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
  12  * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
  13  */
  14
  15 /*
  16  * for linking errors see
  17  * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
  18  */
  19
  20 #ifndef _CONFIG_KM_KIRKWOOD_H
  21 #define _CONFIG_KM_KIRKWOOD_H
  22
  23 /* KM_KIRKWOOD */
  24 #if defined(CONFIG_KM_KIRKWOOD)
  25 #define CONFIG_HOSTNAME                 "km_kirkwood"
  26 #define CONFIG_KM_DISABLE_PCIE
  27
  28 /* KM_KIRKWOOD_PCI */
  29 #elif defined(CONFIG_KM_KIRKWOOD_PCI)
  30 #define CONFIG_HOSTNAME                 "km_kirkwood_pci"
  31 #define CONFIG_KM_UBI_PART_BOOT_OPTS            ",2048"
  32 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
  33
  34 /* KM_KIRKWOOD_128M16 */
  35 #elif defined(CONFIG_KM_KIRKWOOD_128M16)
  36 #define CONFIG_HOSTNAME                 "km_kirkwood_128m16"
  37 #undef CONFIG_SYS_KWD_CONFIG
  38 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
  39 #define CONFIG_KM_DISABLE_PCIE
  40
  41 /* KM_NUSA / KM_SUGP1 */
  42 #elif defined(CONFIG_KM_NUSA) || defined(CONFIG_KM_SUGP1)
  43
  44 # if defined(CONFIG_KM_NUSA)
  45 #define CONFIG_HOSTNAME                 "kmnusa"
  46 # elif defined(CONFIG_KM_SUGP1)
  47 #define CONFIG_HOSTNAME                 "kmsugp1"
  48 #define KM_PCIE_RESET_MPP7
  49 #endif
  50
  51 #undef CONFIG_SYS_KWD_CONFIG
  52 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
  53
  54 /* KM_MGCOGE3UN */
  55 #elif defined(CONFIG_KM_MGCOGE3UN)
  56 #define CONFIG_HOSTNAME                 "mgcoge3un"
  57 #undef CONFIG_SYS_KWD_CONFIG
  58 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
  59 #define CONFIG_KM_BOARD_EXTRA_ENV       "waitforne=true\0"
  60 #define CONFIG_KM_DISABLE_PCIE
  61
  62 /* KMCOGE5UN */
  63 #elif defined(CONFIG_KM_COGE5UN)
  64 #undef  CONFIG_SYS_KWD_CONFIG
  65 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
  66 #define CONFIG_HOSTNAME                 "kmcoge5un"
  67 #define CONFIG_KM_DISABLE_PCIE
  68
  69 /* KM_SUV31 */
  70 #elif defined(CONFIG_KM_SUV31)
  71 #define CONFIG_HOSTNAME                 "kmsuv31"
  72 #undef CONFIG_SYS_KWD_CONFIG
  73 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
  74 #define CONFIG_KM_UBI_PART_BOOT_OPTS            ",2048"
  75 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
  76 #else
  77 #error ("Board unsupported")
  78 #endif
  79
  80 /* include common defines/options for all arm based Keymile boards */
  81 #include "km/km_arm.h"
  82
  83 #if defined(CONFIG_KM_PIGGY4_88E6352)
  84 /*
  85  * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
  86  * an Marvell 88E6352 simple switch.
  87  * In this case we have to change the default settings for the etherent mac.
  88  * There is NO ethernet phy. The ARM and Switch are conencted directly over
  89  * RGMII in MAC-MAC mode
  90  * In this case 1GBit full duplex and autoneg off
  91  */
  92 #define PORT_SERIAL_CONTROL_VALUE               ( \
  93         MVGBE_FORCE_LINK_PASS                       | \
  94         MVGBE_DIS_AUTO_NEG_FOR_DUPLX            | \
  95         MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL        | \
  96         MVGBE_ADV_NO_FLOW_CTRL                      | \
  97         MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX     | \
  98         MVGBE_FORCE_BP_MODE_NO_JAM                  | \
  99         (1 << 9) /* Reserved bit has to be 1 */ | \
 100         MVGBE_DO_NOT_FORCE_LINK_FAIL            | \
 101         MVGBE_DIS_AUTO_NEG_SPEED_GMII           | \
 102         MVGBE_DTE_ADV_0                                 | \
 103         MVGBE_MIIPHY_MAC_MODE                       | \
 104         MVGBE_AUTO_NEG_NO_CHANGE                    | \
 105         MVGBE_MAX_RX_PACKET_1552BYTE            | \
 106         MVGBE_CLR_EXT_LOOPBACK                      | \
 107         MVGBE_SET_FULL_DUPLEX_MODE                  | \
 108         MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
 109         MVGBE_SET_GMII_SPEED_TO_1000        |\
 110         MVGBE_SET_MII_SPEED_TO_100)
 111
 112 #endif
 113
 114 #ifdef CONFIG_KM_PIGGY4_88E6061
 115 /*
 116  * Some keymile boards like mgcoge3un have their PIGGY4 connected via
 117  * an Marvell 88E6061 simple switch.
 118  * In this case we have to change the default settings for the
 119  * ethernet phy connected to the kirkwood.
 120  * In this case 100MB full duplex and autoneg off
 121  */
 122 #define PORT_SERIAL_CONTROL_VALUE               ( \
 123         MVGBE_FORCE_LINK_PASS                   | \
 124         MVGBE_DIS_AUTO_NEG_FOR_DUPLX            | \
 125         MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL        | \
 126         MVGBE_ADV_NO_FLOW_CTRL                  | \
 127         MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX     | \
 128         MVGBE_FORCE_BP_MODE_NO_JAM              | \
 129         (1 << 9) /* Reserved bit has to be 1 */ | \
 130         MVGBE_DO_NOT_FORCE_LINK_FAIL            | \
 131         MVGBE_DIS_AUTO_NEG_SPEED_GMII           | \
 132         MVGBE_DTE_ADV_0                         | \
 133         MVGBE_MIIPHY_MAC_MODE                   | \
 134         MVGBE_AUTO_NEG_NO_CHANGE                | \
 135         MVGBE_MAX_RX_PACKET_1552BYTE            | \
 136         MVGBE_CLR_EXT_LOOPBACK                  | \
 137         MVGBE_SET_FULL_DUPLEX_MODE              | \
 138         MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX        |\
 139         MVGBE_SET_GMII_SPEED_TO_10_100  |\
 140         MVGBE_SET_MII_SPEED_TO_100)
 141 #endif
 142
 143 #ifdef CONFIG_KM_DISABLE_PCIE
 144 #undef  CONFIG_KIRKWOOD_PCIE_INIT
 145 #endif
 146
 147 #endif /* _CONFIG_KM_KIRKWOOD */