include/configs/km_kirkwood.h

   1 /*
   2  * (C) Copyright 2009
   3  * Marvell Semiconductor <www.marvell.com>
   4  * Prafulla Wadaskar <prafulla@marvell.com>
   5  *
   6  * (C) Copyright 2009
   7  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   8  *
   9  * (C) Copyright 2011-2012
  10  * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
  11  * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
  12  *
  13  * SPDX-License-Identifier:     GPL-2.0+
  14  */
  15
  16 /*
  17  * for linking errors see
  18  * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
  19  */
  20
  21 #ifndef _CONFIG_KM_KIRKWOOD_H
  22 #define _CONFIG_KM_KIRKWOOD_H
  23
  24 /* KM_KIRKWOOD */
  25 #if defined(CONFIG_KM_KIRKWOOD)
  26 #define CONFIG_IDENT_STRING             "\nKeymile Kirkwood"
  27 #define CONFIG_HOSTNAME                 km_kirkwood
  28 #define CONFIG_KM_DISABLE_PCIE
  29 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  30
  31 /* KM_KIRKWOOD_PCI */
  32 #elif defined(CONFIG_KM_KIRKWOOD_PCI)
  33 #define CONFIG_IDENT_STRING             "\nKeymile Kirkwood PCI"
  34 #define CONFIG_HOSTNAME                 km_kirkwood_pci
  35 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  36 #define CONFIG_KM_FPGA_CONFIG
  37
  38 /* KM_NUSA */
  39 #elif defined(CONFIG_KM_NUSA)
  40 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  41 #define CONFIG_IDENT_STRING             "\nKeymile NUSA"
  42 #define CONFIG_HOSTNAME                 kmnusa
  43 #undef CONFIG_SYS_KWD_CONFIG
  44 #define CONFIG_SYS_KWD_CONFIG \
  45                 $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
  46 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
  47 #define CONFIG_KM_FPGA_CONFIG
  48 #define CONFIG_KM_PIGGY4_88E6352
  49 #define CONFIG_MV88E6352_SWITCH
  50 #define CONFIG_KM_MVEXTSW_ADDR          0x10
  51
  52 /* KM_MGCOGE3UN */
  53 #elif defined(CONFIG_KM_MGCOGE3UN)
  54 #define CONFIG_IDENT_STRING             "\nKeymile COGE3UN"
  55 #define CONFIG_HOSTNAME                 mgcoge3un
  56 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  57 #undef CONFIG_SYS_KWD_CONFIG
  58 #define CONFIG_SYS_KWD_CONFIG \
  59                 $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
  60 #define CONFIG_KM_BOARD_EXTRA_ENV       "waitforne=true\0"
  61 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET  3
  62 #define CONFIG_KM_DISABLE_PCIE
  63 #define CONFIG_KM_PIGGY4_88E6061
  64
  65 /* KMCOGE5UN */
  66 #elif defined(CONFIG_KM_COGE5UN)
  67 #define CONFIG_IDENT_STRING             "\nKeymile COGE5UN"
  68 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  69 #undef  CONFIG_SYS_KWD_CONFIG
  70 #define CONFIG_SYS_KWD_CONFIG \
  71                 $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
  72 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
  73 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET  3
  74 #define CONFIG_HOSTNAME                 kmcoge5un
  75 #define CONFIG_KM_DISABLE_PCIE
  76 #define CONFIG_KM_PIGGY4_88E6352
  77
  78 /* KM_PORTL2 */
  79 #elif defined(CONFIG_KM_PORTL2)
  80 #define CONFIG_IDENT_STRING             "\nKeymile Port-L2"
  81 #define CONFIG_HOSTNAME                 portl2
  82 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  83 #define CONFIG_KM_PIGGY4_88E6061
  84
  85 /* KM_SUV31 */
  86 #elif defined(CONFIG_KM_SUV31)
  87 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  88 #define CONFIG_IDENT_STRING             "\nKeymile SUV31"
  89 #define CONFIG_HOSTNAME                 kmsuv31
  90 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
  91 #define CONFIG_KM_FPGA_CONFIG
  92
  93 #else
  94 #error ("Board unsupported")
  95 #endif
  96
  97 /* include common defines/options for all arm based Keymile boards */
  98 #include "km/km_arm.h"
  99
 100 #ifndef CONFIG_KM_ENV_IS_IN_SPI_NOR
 101 #define KM_ENV_BUS      5       /* I2C2 (Mux-Port 5)*/
 102 #endif
 103
 104 #if defined(CONFIG_KM_PIGGY4_88E6352)
 105 /*
 106  * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
 107  * an Marvell 88E6352 simple switch.
 108  * In this case we have to change the default settings for the etherent mac.
 109  * There is NO ethernet phy. The ARM and Switch are conencted directly over
 110  * RGMII in MAC-MAC mode
 111  * In this case 1GBit full duplex and autoneg off
 112  */
 113 #define PORT_SERIAL_CONTROL_VALUE               ( \
 114         MVGBE_FORCE_LINK_PASS                       | \
 115         MVGBE_DIS_AUTO_NEG_FOR_DUPLX            | \
 116         MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL        | \
 117         MVGBE_ADV_NO_FLOW_CTRL                      | \
 118         MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX     | \
 119         MVGBE_FORCE_BP_MODE_NO_JAM                  | \
 120         (1 << 9) /* Reserved bit has to be 1 */ | \
 121         MVGBE_DO_NOT_FORCE_LINK_FAIL            | \
 122         MVGBE_DIS_AUTO_NEG_SPEED_GMII           | \
 123         MVGBE_DTE_ADV_0                                 | \
 124         MVGBE_MIIPHY_MAC_MODE                       | \
 125         MVGBE_AUTO_NEG_NO_CHANGE                    | \
 126         MVGBE_MAX_RX_PACKET_1552BYTE            | \
 127         MVGBE_CLR_EXT_LOOPBACK                      | \
 128         MVGBE_SET_FULL_DUPLEX_MODE                  | \
 129         MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
 130         MVGBE_SET_GMII_SPEED_TO_1000        |\
 131         MVGBE_SET_MII_SPEED_TO_100)
 132
 133 #endif
 134
 135 #ifdef CONFIG_KM_PIGGY4_88E6061
 136 /*
 137  * Some keymile boards like mgcoge3un have their PIGGY4 connected via
 138  * an Marvell 88E6061 simple switch.
 139  * In this case we have to change the default settings for the
 140  * ethernet phy connected to the kirkwood.
 141  * In this case 100MB full duplex and autoneg off
 142  */
 143 #define PORT_SERIAL_CONTROL_VALUE               ( \
 144         MVGBE_FORCE_LINK_PASS                   | \
 145         MVGBE_DIS_AUTO_NEG_FOR_DUPLX            | \
 146         MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL        | \
 147         MVGBE_ADV_NO_FLOW_CTRL                  | \
 148         MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX     | \
 149         MVGBE_FORCE_BP_MODE_NO_JAM              | \
 150         (1 << 9) /* Reserved bit has to be 1 */ | \
 151         MVGBE_DO_NOT_FORCE_LINK_FAIL            | \
 152         MVGBE_DIS_AUTO_NEG_SPEED_GMII           | \
 153         MVGBE_DTE_ADV_0                         | \
 154         MVGBE_MIIPHY_MAC_MODE                   | \
 155         MVGBE_AUTO_NEG_NO_CHANGE                | \
 156         MVGBE_MAX_RX_PACKET_1552BYTE            | \
 157         MVGBE_CLR_EXT_LOOPBACK                  | \
 158         MVGBE_SET_FULL_DUPLEX_MODE              | \
 159         MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX        |\
 160         MVGBE_SET_GMII_SPEED_TO_10_100  |\
 161         MVGBE_SET_MII_SPEED_TO_100)
 162 #endif
 163
 164 #ifdef CONFIG_KM_DISABLE_PCI
 165 #undef  CONFIG_KIRKWOOD_PCIE_INIT
 166 #endif
 167
 168
 169 #endif /* _CONFIG_KM_KIRKWOOD */