include/configs/km8360.h

   1 /*
   2  * (C) Copyright 2012
   3  * Holger Brunck, Keymile GmbH Hannover, <holger.brunck@keymile.com>
   4  * Christian Herzig, Keymile AG Switzerland, <christian.herzig@keymile.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 /* KMBEC FPGA (PRIO) */
  13 #define CONFIG_SYS_KMBEC_FPGA_BASE      0xE8000000
  14 #define CONFIG_SYS_KMBEC_FPGA_SIZE      64
  15
  16 #if defined CONFIG_KMETER1
  17 #define CONFIG_HOSTNAME         kmeter1
  18 #define CONFIG_KM_BOARD_NAME   "kmeter1"
  19 #define CONFIG_KM_DEF_NETDEV    "netdev=eth2\0"
  20 #elif defined CONFIG_KMCOGE5NE
  21 #define CONFIG_HOSTNAME         kmcoge5ne
  22 #define CONFIG_KM_BOARD_NAME    "kmcoge5ne"
  23 #define CONFIG_KM_DEF_NETDEV    "netdev=eth1\0"
  24 #define CONFIG_CMD_NAND
  25 #define CONFIG_NAND_ECC_BCH
  26 #define CONFIG_BCH
  27 #define CONFIG_NAND_KMETER1
  28 #define CONFIG_SYS_MAX_NAND_DEVICE              1
  29 #define NAND_MAX_CHIPS                          1
  30 #define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
  31
  32 #define CONFIG_KM_UBI_PARTITION_NAME_BOOT       "ubi0"
  33 #define CONFIG_KM_UBI_PARTITION_NAME_APP        "ubi1"
  34 #define MTDIDS_DEFAULT                  "nor0=boot,nand0=app"
  35
  36 #define MTDPARTS_DEFAULT                "mtdparts="                     \
  37         "boot:"                                                         \
  38                 "768k(u-boot),"                                         \
  39                 "128k(env),"                                            \
  40                 "128k(envred),"                                         \
  41                 "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"             \
  42         "app:"                                                          \
  43                 "-(" CONFIG_KM_UBI_PARTITION_NAME_APP ");"
  44 #else
  45 #error ("Board not supported")
  46 #endif
  47
  48 /*
  49  * High Level Configuration Options
  50  */
  51 #define CONFIG_QE                       /* Has QE */
  52 #define CONFIG_MPC8360                  /* MPC8360 CPU specific */
  53
  54 #define CONFIG_SYS_TEXT_BASE    0xF0000000
  55
  56 /* include common defines/options for all 83xx Keymile boards */
  57 #include "km/km83xx-common.h"
  58
  59 /*
  60  * System IO Setup
  61  */
  62 #define CONFIG_SYS_SICRH                (SICRH_UC1EOBI | SICRH_UC2E1OBI)
  63
  64 /*
  65  * Hardware Reset Configuration Word
  66  */
  67 #define CONFIG_SYS_HRCW_LOW (\
  68         HRCWL_CSB_TO_CLKIN_4X1 | \
  69         HRCWL_CORE_TO_CSB_2X1 | \
  70         HRCWL_CE_PLL_VCO_DIV_2 | \
  71         HRCWL_CE_TO_PLL_1X6)
  72
  73 #define CONFIG_SYS_HRCW_HIGH (\
  74         HRCWH_CORE_ENABLE | \
  75         HRCWH_FROM_0X00000100 | \
  76         HRCWH_BOOTSEQ_DISABLE | \
  77         HRCWH_SW_WATCHDOG_DISABLE | \
  78         HRCWH_ROM_LOC_LOCAL_16BIT | \
  79         HRCWH_BIG_ENDIAN | \
  80         HRCWH_LALE_EARLY | \
  81         HRCWH_LDP_CLEAR)
  82
  83 /**
  84  * DDR RAM settings
  85  */
  86 #define CONFIG_SYS_DDR_SDRAM_CFG (\
  87         SDRAM_CFG_SDRAM_TYPE_DDR2 | \
  88         SDRAM_CFG_SREN | \
  89         SDRAM_CFG_HSE)
  90
  91 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00401000
  92
  93 #ifdef CONFIG_KMCOGE5NE
  94 /**
  95  * KMCOGE5NE has 512 MB RAM
  96  */
  97 #define CONFIG_SYS_DDR_CS0_CONFIG (\
  98         CSCONFIG_EN | \
  99         CSCONFIG_AP | \
 100         CSCONFIG_ODT_RD_ONLY_CURRENT | \
 101         CSCONFIG_BANK_BIT_3 | \
 102         CSCONFIG_ROW_BIT_13 | \
 103         CSCONFIG_COL_BIT_10)
 104 #else
 105 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN | CSCONFIG_AP | \
 106                                          CSCONFIG_ROW_BIT_13 | \
 107                                          CSCONFIG_COL_BIT_10 | \
 108                                          CSCONFIG_ODT_RD_ONLY_CURRENT)
 109 #endif
 110
 111 #define CONFIG_SYS_DDR_CLK_CNTL (\
 112         DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
 113
 114 #define CONFIG_SYS_DDR_INTERVAL (\
 115         (0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
 116         (0x203 << SDRAM_INTERVAL_REFINT_SHIFT))
 117
 118 #define CONFIG_SYS_DDR_CS0_BNDS                 0x0000007f
 119
 120 #define CONFIG_SYS_DDRCDR (\
 121         DDRCDR_EN | \
 122         DDRCDR_Q_DRN)
 123 #define CONFIG_SYS_DDR_MODE             0x47860452
 124 #define CONFIG_SYS_DDR_MODE2            0x8080c000
 125
 126 #define CONFIG_SYS_DDR_TIMING_0 (\
 127         (2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
 128         (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
 129         (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
 130         (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
 131         (0 << TIMING_CFG0_WWT_SHIFT) | \
 132         (0 << TIMING_CFG0_RRT_SHIFT) | \
 133         (0 << TIMING_CFG0_WRT_SHIFT) | \
 134         (0 << TIMING_CFG0_RWT_SHIFT))
 135
 136 #define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \
 137                                  (2 << TIMING_CFG1_WRTORD_SHIFT) | \
 138                                  (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
 139                                  (3 << TIMING_CFG1_WRREC_SHIFT) | \
 140                                  (7 << TIMING_CFG1_REFREC_SHIFT) | \
 141                                  (3 << TIMING_CFG1_ACTTORW_SHIFT) | \
 142                                  (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
 143                                  (3 << TIMING_CFG1_PRETOACT_SHIFT))
 144
 145 #define CONFIG_SYS_DDR_TIMING_2 (\
 146         (0xa << TIMING_CFG2_FOUR_ACT_SHIFT) | \
 147         (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
 148         (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
 149         (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
 150         (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
 151         (5 << TIMING_CFG2_CPO_SHIFT) | \
 152         (0 << TIMING_CFG2_ADD_LAT_SHIFT))
 153
 154 #define CONFIG_SYS_DDR_TIMING_3                 0x00000000
 155
 156 /* EEprom support */
 157 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 158
 159 /*
 160  * Local Bus Configuration & Clock Setup
 161  */
 162 #define CONFIG_SYS_LCRR_DBYP            LCRR_DBYP
 163 #define CONFIG_SYS_LCRR_EADC            LCRR_EADC_2
 164 #define CONFIG_SYS_LCRR_CLKDIV          LCRR_CLKDIV_4
 165
 166 /*
 167  * PAXE on the local bus CS3
 168  */
 169 #define CONFIG_SYS_PAXE_BASE            0xA0000000
 170 #define CONFIG_SYS_PAXE_SIZE            256
 171
 172 #define CONFIG_SYS_LBLAWBAR3_PRELIM     CONFIG_SYS_PAXE_BASE
 173
 174 #define CONFIG_SYS_LBLAWAR3_PRELIM      0x8000001C /* 512MB window size */
 175
 176 #define CONFIG_SYS_BR3_PRELIM (\
 177         CONFIG_SYS_PAXE_BASE | \
 178         (1 << BR_PS_SHIFT) | \
 179         BR_V)
 180
 181 #define CONFIG_SYS_OR3_PRELIM (\
 182         MEG_TO_AM(CONFIG_SYS_PAXE_SIZE) | \
 183         OR_GPCM_CSNT | \
 184         OR_GPCM_ACS_DIV2 | \
 185         OR_GPCM_SCY_2 | \
 186         OR_GPCM_TRLX | \
 187         OR_GPCM_EAD)
 188
 189 #ifdef CONFIG_KMCOGE5NE
 190 /*
 191  * BFTIC3 on the local bus CS4
 192  */
 193 #define CONFIG_SYS_BFTIC3_BASE                  0xB0000000
 194 #define CONFIG_SYS_BFTIC3_SIZE                  256
 195
 196 #define CONFIG_SYS_BR4_PRELIM (\
 197         CONFIG_SYS_BFTIC3_BASE |\
 198         (1 << BR_PS_SHIFT) | \
 199         BR_V)
 200
 201 #define CONFIG_SYS_OR4_PRELIM (\
 202         MEG_TO_AM(CONFIG_SYS_BFTIC3_SIZE) |\
 203         OR_GPCM_CSNT | \
 204         OR_GPCM_ACS_DIV2 |\
 205         OR_GPCM_SCY_2 |\
 206         OR_GPCM_TRLX |\
 207         OR_GPCM_EAD)
 208 #endif
 209
 210 /*
 211  * MMU Setup
 212  */
 213
 214 /* PAXE:  icache cacheable, but dcache-inhibit and guarded */
 215 #define CONFIG_SYS_IBAT5L (\
 216         CONFIG_SYS_PAXE_BASE | \
 217         BATL_PP_10 | \
 218         BATL_MEMCOHERENCE)
 219
 220 #define CONFIG_SYS_IBAT5U (\
 221         CONFIG_SYS_PAXE_BASE | \
 222         BATU_BL_256M | \
 223         BATU_VS | \
 224         BATU_VP)
 225
 226 #define CONFIG_SYS_DBAT5L (\
 227         CONFIG_SYS_PAXE_BASE | \
 228         BATL_PP_10 | \
 229         BATL_CACHEINHIBIT | \
 230         BATL_GUARDEDSTORAGE)
 231
 232 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 233
 234
 235 #ifdef CONFIG_KMCOGE5NE
 236 /* BFTIC3:  icache cacheable, but dcache-inhibit and guarded */
 237 #define CONFIG_SYS_IBAT6L (\
 238         CONFIG_SYS_BFTIC3_BASE | \
 239         BATL_PP_10 | \
 240         BATL_MEMCOHERENCE)
 241
 242 #define CONFIG_SYS_IBAT6U (\
 243         CONFIG_SYS_BFTIC3_BASE | \
 244         BATU_BL_256M | \
 245         BATU_VS | \
 246         BATU_VP)
 247
 248 #define CONFIG_SYS_DBAT6L (\
 249         CONFIG_SYS_BFTIC3_BASE | \
 250         BATL_PP_10 | \
 251         BATL_CACHEINHIBIT | \
 252         BATL_GUARDEDSTORAGE)
 253
 254 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 255
 256 /* DDR/LBC SDRAM next 256M: cacheable */
 257 #define CONFIG_SYS_IBAT7L (\
 258         CONFIG_SYS_SDRAM_BASE2 |\
 259         BATL_PP_10 |\
 260         BATL_CACHEINHIBIT |\
 261         BATL_GUARDEDSTORAGE)
 262
 263 #define CONFIG_SYS_IBAT7U (\
 264         CONFIG_SYS_SDRAM_BASE2 |\
 265         BATU_BL_256M |\
 266         BATU_VS |\
 267         BATU_VP)
 268 /* enable POST tests */
 269 #define CONFIG_POST (CONFIG_SYS_POST_MEMORY|CONFIG_SYS_POST_MEM_REGIONS)
 270 #define CONFIG_POST_EXTERNAL_WORD_FUNCS /* use own functions, not generic */
 271 #define CPM_POST_WORD_ADDR  CONFIG_SYS_MEMTEST_END
 272 #define CONFIG_TESTPIN_REG  gprt3       /* for kmcoge5ne */
 273 #define CONFIG_TESTPIN_MASK 0x20        /* for kmcoge5ne */
 274 #define CONFIG_CMD_DIAG /* so that testpin is inquired for POST test */
 275
 276 #else
 277 #define CONFIG_SYS_IBAT6L       (0)
 278 #define CONFIG_SYS_IBAT6U       (0)
 279 #define CONFIG_SYS_IBAT7L       (0)
 280 #define CONFIG_SYS_IBAT7U       (0)
 281 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 282 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 283 #endif
 284
 285 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 286 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 287
 288 #endif /* CONFIG */