include/configs/km/pg-wcom-ls102xa.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2020 Hitachi Power Grids. All rights reserved.
   4  */
   5
   6 #ifndef __CONFIG_PG_WCOM_LS102XA_H
   7 #define __CONFIG_PG_WCOM_LS102XA_H
   8
   9 /* include common defines/options for all Keymile boards */
  10 #include "keymile-common.h"
  11
  12 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  13 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  14
  15 #define CONFIG_PRAM                     ((CONFIG_KM_PNVRAM + \
  16                                           CONFIG_KM_PHRAM + \
  17                                           CONFIG_KM_RESERVED_PRAM) >> 10)
  18
  19 #define PHYS_SDRAM                      0x80000000
  20 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
  21
  22 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000UL
  23 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  24
  25 #define SPD_EEPROM_ADDRESS              0x54
  26
  27 /* POST memory regions test */
  28 #define CONFIG_POST                     (CONFIG_SYS_POST_MEM_REGIONS)
  29 #define CONFIG_POST_EXTERNAL_WORD_FUNCS
  30
  31 /*
  32  * IFC Definitions
  33  */
  34 /* NOR Flash Definitions */
  35 #define CONFIG_SYS_FLASH_BASE           0x60000000
  36 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
  37
  38 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
  39 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
  40                                 CSPR_PORT_SIZE_16 | \
  41                                 CSPR_TE | \
  42                                 CSPR_MSEL_NOR | \
  43                                 CSPR_V)
  44 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(64 * 1024 * 1024)
  45
  46 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_AVD_TGL_PGM_EN | \
  47                                         CSOR_NOR_ADM_SHIFT(0x4) | \
  48                                         CSOR_NOR_NOR_MODE_ASYNC_NOR | \
  49                                         CSOR_NOR_TRHZ_20 | \
  50                                         CSOR_NOR_BCTLD)
  51 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x1) | \
  52                                         FTIM0_NOR_TEADC(0x7) | \
  53                                         FTIM0_NOR_TAVDS(0x0) | \
  54                                         FTIM0_NOR_TEAHC(0x1))
  55 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x1) | \
  56                                         FTIM1_NOR_TRAD_NOR(0x21) | \
  57                                         FTIM1_NOR_TSEQRAD_NOR(0x21))
  58 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x1) | \
  59                                         FTIM2_NOR_TCH(0x1) | \
  60                                         FTIM2_NOR_TWPH(0x6) | \
  61                                         FTIM2_NOR_TWP(0xb))
  62 #define CONFIG_SYS_NOR_FTIM3            0
  63
  64 #define CONFIG_SYS_FLASH_QUIET_TEST
  65 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
  66
  67 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
  68
  69 #define CONFIG_SYS_WRITE_SWAPPED_DATA
  70
  71 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
  72 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
  73 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
  74 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
  75 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
  76 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
  77 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
  78 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
  79
  80 /* NAND Flash Definitions */
  81 #define CONFIG_SYS_NAND_BASE            0x68000000
  82 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
  83
  84 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
  85 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE) | \
  86                                 CSPR_PORT_SIZE_8 | \
  87                                 CSPR_TE | \
  88                                 CSPR_MSEL_NAND | \
  89                                 CSPR_V)
  90 #define CONFIG_SYS_NAND_AMASK           IFC_AMASK(64 * 1024)
  91 #define CONFIG_SYS_NAND_CSOR            (CSOR_NAND_ECC_ENC_EN \
  92                                         | CSOR_NAND_ECC_DEC_EN \
  93                                         | CSOR_NAND_ECC_MODE_4 \
  94                                         | CSOR_NAND_RAL_3 \
  95                                         | CSOR_NAND_PGS_2K \
  96                                         | CSOR_NAND_SPRZ_64 \
  97                                         | CSOR_NAND_PB(64) \
  98                                         | CSOR_NAND_TRHZ_40 \
  99                                         | CSOR_NAND_BCTLD)
 100
 101 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x3) | \
 102                                         FTIM0_NAND_TWP(0x8) | \
 103                                         FTIM0_NAND_TWCHT(0x3) | \
 104                                         FTIM0_NAND_TWH(0x5))
 105 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x1e) | \
 106                                         FTIM1_NAND_TWBE(0x1e) | \
 107                                         FTIM1_NAND_TRR(0x6) | \
 108                                         FTIM1_NAND_TRP(0x8))
 109 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x9) | \
 110                                         FTIM2_NAND_TREH(0x5) | \
 111                                         FTIM2_NAND_TWHRE(0x3c))
 112 #define CONFIG_SYS_NAND_FTIM3           (FTIM3_NAND_TWW(0x1e))
 113
 114 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 115 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 116 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 117 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 118 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 119 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 120 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 121 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 122
 123 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 124 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 125
 126 /* QRIO FPGA Definitions */
 127 #define CONFIG_SYS_QRIO_BASE            0x70000000
 128 #define CONFIG_SYS_QRIO_BASE_PHYS       CONFIG_SYS_QRIO_BASE
 129
 130 #define CONFIG_SYS_CSPR2_EXT            (0x00)
 131 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_QRIO_BASE) | \
 132                                         CSPR_PORT_SIZE_8 | \
 133                                         CSPR_TE | \
 134                                         CSPR_MSEL_GPCM | \
 135                                         CSPR_V)
 136 #define CONFIG_SYS_AMASK2               IFC_AMASK(64 * 1024)
 137 #define CONFIG_SYS_CSOR2                (CSOR_GPCM_ADM_SHIFT(0x4) | \
 138                                         CSOR_GPCM_TRHZ_20 | \
 139                                         CSOR_GPCM_BCTLD)
 140 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x2) | \
 141                                         FTIM0_GPCM_TEADC(0x8) | \
 142                                         FTIM0_GPCM_TEAHC(0x2))
 143 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x2) | \
 144                                         FTIM1_GPCM_TRAD(0x6))
 145 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x1) | \
 146                                         FTIM2_GPCM_TCH(0x1) | \
 147                                         FTIM2_GPCM_TWP(0x7))
 148 #define CONFIG_SYS_CS2_FTIM3            0x04000000
 149
 150 /*
 151  * Serial Port
 152  */
 153 #define CONFIG_SYS_NS16550_SERIAL
 154 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 155
 156 /*
 157  * I2C
 158  */
 159 #define CONFIG_SYS_I2C_INIT_BOARD
 160
 161 #define CONFIG_I2C_MULTI_BUS
 162 #define CONFIG_SYS_I2C_MAX_HOPS         1
 163 #define CONFIG_SYS_NUM_I2C_BUSES        3
 164 #define I2C_MUX_PCA_ADDR                0x70
 165 #define I2C_MUX_CH_DEFAULT              0x0
 166 #define CONFIG_SYS_I2C_BUSES    {       {0, {I2C_NULL_HOP} }, \
 167                                         {0, {{I2C_MUX_PCA9547, 0x70, 1 } } }, \
 168                                         {1, {I2C_NULL_HOP}                 }, \
 169                                 }
 170
 171 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 172
 173 #define CONFIG_HWCONFIG
 174 #define HWCONFIG_BUFFER_SIZE            256
 175 #define CONFIG_FSL_DEVICE_DISABLE
 176
 177 /*
 178  * Miscellaneous configurable options
 179  */
 180
 181 #define CONFIG_LS102XA_STREAM_ID
 182
 183 #define CONFIG_SYS_MONITOR_LEN          0x100000     /* 1Mbyte */
 184
 185 /*
 186  * Environment
 187  */
 188
 189 #define CONFIG_ENV_TOTAL_SIZE           0x40000
 190 #define ENV_DEL_ADDR            CONFIG_ENV_ADDR_REDUND  /* direct for newenv */
 191
 192 #ifndef CONFIG_KM_DEF_ENV               /* if not set by keymile-common.h */
 193 #define CONFIG_KM_DEF_ENV
 194 #endif
 195
 196 #ifndef CONFIG_KM_DEF_BOOT_ARGS_CPU
 197 #define CONFIG_KM_DEF_BOOT_ARGS_CPU             ""
 198 #endif
 199
 200 #define CONFIG_KM_DEF_ENV_CPU                                           \
 201         "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0"                   \
 202         "cramfsloadfdt="                                                \
 203                 "cramfsload ${fdt_addr_r} "                             \
 204                 "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0"             \
 205         "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"                       \
 206         "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)      \
 207                 " +${filesize} && "                                     \
 208                 "erase " __stringify(CONFIG_SYS_MONITOR_BASE)           \
 209                 " +${filesize} && "                                     \
 210                 "cp.b ${load_addr_r} "                                  \
 211                 __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize} && " \
 212                 "protect on " __stringify(CONFIG_SYS_MONITOR_BASE)      \
 213                 " +${filesize}\0"                                       \
 214         "update-nor=protect off " __stringify(CONFIG_SYS_FLASH_BASE)    \
 215                 " +${filesize} && "                                     \
 216                 "erase " __stringify(CONFIG_SYS_FLASH_BASE)             \
 217                 " +${filesize} && "                                     \
 218                 "cp.b ${load_addr_r} "                                  \
 219                 __stringify(CONFIG_SYS_FLASH_BASE) " ${filesize} && "   \
 220                 "protect on " __stringify(CONFIG_SYS_MONITOR_BASE)      \
 221                 " +" __stringify(CONFIG_SYS_MONITOR_LEN)"\0"            \
 222         "set_fdthigh=true\0"                    \
 223         "checkfdt=true\0"                                               \
 224         ""
 225
 226 #define CONFIG_KM_NEW_ENV                                               \
 227         "newenv=protect off " __stringify(ENV_DEL_ADDR)                 \
 228                 " +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && "          \
 229                 "erase " __stringify(ENV_DEL_ADDR)                      \
 230                 " +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && "          \
 231                 "protect on " __stringify(ENV_DEL_ADDR)                 \
 232                 " +" __stringify(CONFIG_ENV_TOTAL_SIZE) "\0"
 233
 234 #define CONFIG_HW_ENV_SETTINGS                                          \
 235         "hwconfig=devdis:esdhc,usb3,usb2,sata,sec,dcu,duart2,qspi,"     \
 236                         "can1,can2_4,ftm2_8,i2c2_3,sai1_4,lpuart2_6,"   \
 237                         "asrc,spdif,lpuart1,ftm1\0"
 238
 239 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 240         CONFIG_KM_NEW_ENV                                               \
 241         CONFIG_KM_DEF_ENV                                               \
 242         CONFIG_HW_ENV_SETTINGS                                          \
 243         "EEprom_ivm=pca9547:70:9\0"                                     \
 244         "ethrotate=no\0"                                                \
 245         ""
 246
 247 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20) /* Increase map for Linux */
 248
 249 #endif