include/configs/km/km_arm.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2009
   4  * Marvell Semiconductor <www.marvell.com>
   5  * Prafulla Wadaskar <prafulla@marvell.com>
   6  *
   7  * (C) Copyright 2009
   8  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   9  *
  10  * (C) Copyright 2010-2011
  11  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  12  */
  13
  14 /*
  15  * for linking errors see
  16  * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
  17  */
  18
  19 #ifndef _CONFIG_KM_ARM_H
  20 #define _CONFIG_KM_ARM_H
  21
  22 /*
  23  * High Level Configuration Options (easy to change)
  24  */
  25 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  26 #define CONFIG_KW88F6281                /* SOC Name */
  27
  28 #define CONFIG_NAND_ECC_BCH
  29
  30 /* include common defines/options for all Keymile boards */
  31 #include "keymile-common.h"
  32
  33 /* Increase max size of compressed kernel */
  34 #define CONFIG_SYS_BOOTM_LEN            (32 << 20)
  35
  36 #include "asm/arch/config.h"
  37
  38 /* architecture specific default bootargs */
  39 #define CONFIG_KM_DEF_BOOT_ARGS_CPU                                     \
  40                 "bootcountaddr=${bootcountaddr} ${mtdparts}"            \
  41                 " boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}"
  42
  43 #define CONFIG_KM_DEF_ENV_CPU                                           \
  44         "u-boot=" CONFIG_HOSTNAME "/u-boot.kwb\0"               \
  45         CONFIG_KM_UPDATE_UBOOT                                          \
  46         "set_fdthigh=setenv fdt_high ${kernelmem}\0"                    \
  47         "checkfdt="                                                     \
  48                 "if cramfsls fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb; " \
  49                 "then true; else setenv cramfsloadfdt true; "           \
  50                 "setenv boot bootm ${load_addr_r}; "                    \
  51                 "echo No FDT found, booting with the kernel "           \
  52                 "appended one; fi\0"                                    \
  53         ""
  54
  55 /*
  56  * NAND Flash configuration
  57  */
  58 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  59
  60 /*
  61  * Other required minimal configurations
  62  */
  63
  64 /*
  65  * Ethernet Driver configuration
  66  */
  67 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer autoneg timeout */
  68 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
  69 #define CONFIG_PHY_BASE_ADR     0
  70
  71 /*
  72  * I2C related stuff
  73  */
  74 #undef CONFIG_I2C_MVTWSI
  75 #define CONFIG_SYS_I2C_INIT_BOARD
  76
  77 #define CONFIG_KIRKWOOD_GPIO            /* Enable GPIO Support */
  78 #define CONFIG_SYS_NUM_I2C_BUSES        6
  79 #define CONFIG_SYS_I2C_MAX_HOPS         1
  80 #define CONFIG_SYS_I2C_BUSES    {       {0, {I2C_NULL_HOP} }, \
  81                                         {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
  82                                         {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
  83                                         {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
  84                                         {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
  85                                         {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
  86                                 }
  87
  88 #ifndef __ASSEMBLY__
  89 #include <asm/arch/gpio.h>
  90 #include <linux/delay.h>
  91 #include <linux/stringify.h>
  92 extern void __set_direction(unsigned pin, int high);
  93 #define KM_KIRKWOOD_SDA_PIN     8
  94 #define KM_KIRKWOOD_SCL_PIN     9
  95 #define KM_KIRKWOOD_SOFT_I2C_GPIOS      0x0300
  96 #define KM_KIRKWOOD_ENV_WP      38
  97
  98 #define I2C_ACTIVE      __set_direction(KM_KIRKWOOD_SDA_PIN, 0)
  99 #define I2C_TRISTATE    __set_direction(KM_KIRKWOOD_SDA_PIN, 1)
 100 #define I2C_READ        (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0)
 101 #define I2C_SDA(bit)    kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit)
 102 #define I2C_SCL(bit)    kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit)
 103 #endif
 104
 105 #define I2C_DELAY       udelay(1)
 106 #define I2C_SOFT_DECLARATIONS
 107
 108 /* EEprom support 24C128, 24C256 valid for environment eeprom */
 109 #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
 110
 111 /*
 112  *  Environment variables configurations
 113  */
 114 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
 115 #define CONFIG_ENV_TOTAL_SIZE           0x20000     /* no bracets! */
 116 #else
 117 #define CONFIG_SYS_EEPROM_WREN
 118 #define CONFIG_I2C_ENV_EEPROM_BUS 5 /* I2C2 (Mux-Port 5) */
 119 #endif
 120
 121 #define KM_FLASH_GPIO_PIN       16
 122
 123 #define CONFIG_KM_UPDATE_UBOOT                                          \
 124         "update="                                                       \
 125                 "sf probe 0;sf erase 0 +${filesize};"                   \
 126                 "sf write ${load_addr_r} 0 ${filesize};\0"
 127
 128 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
 129 #define CONFIG_KM_NEW_ENV                                               \
 130         "newenv=sf probe 0;"                                            \
 131                 "sf erase " __stringify(CONFIG_ENV_OFFSET) " "          \
 132                 __stringify(CONFIG_ENV_TOTAL_SIZE)"\0"
 133 #else
 134 #define CONFIG_KM_NEW_ENV                                               \
 135         "newenv=setenv addr 0x100000 && "                               \
 136                 "i2c dev " __stringify(CONFIG_I2C_ENV_EEPROM_BUS) "; "  \
 137                 "mw.b ${addr} 0 4 && "                                  \
 138                 "eeprom write " __stringify(CONFIG_SYS_I2C_EEPROM_ADDR) \
 139                 " ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && "     \
 140                 "eeprom write " __stringify(CONFIG_SYS_I2C_EEPROM_ADDR) \
 141                 " ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0"
 142 #endif
 143
 144 #ifndef CONFIG_KM_BOARD_EXTRA_ENV
 145 #define CONFIG_KM_BOARD_EXTRA_ENV       ""
 146 #endif
 147
 148 /*
 149  * Default environment variables
 150  */
 151 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 152         CONFIG_KM_BOARD_EXTRA_ENV                                       \
 153         CONFIG_KM_DEF_ENV                                               \
 154         CONFIG_KM_NEW_ENV                                               \
 155         "arch=arm\0"                                                    \
 156         ""
 157
 158 /* additions for new relocation code, must be added to all boards */
 159 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 160
 161 /* address for the bootcount (taken from end of RAM) */
 162 #define BOOTCOUNT_ADDR          (CONFIG_KM_RESERVED_PRAM)
 163
 164 /* enable POST tests */
 165 #define CONFIG_POST     (CONFIG_SYS_POST_MEM_REGIONS)
 166 #define CONFIG_POST_SKIP_ENV_FLAGS
 167 #define CONFIG_POST_EXTERNAL_WORD_FUNCS
 168
 169 #endif /* _CONFIG_KM_ARM_H */