include/configs/km/km_arm.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2009
   4  * Marvell Semiconductor <www.marvell.com>
   5  * Prafulla Wadaskar <prafulla@marvell.com>
   6  *
   7  * (C) Copyright 2009
   8  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   9  *
  10  * (C) Copyright 2010-2011
  11  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  12  */
  13
  14 /*
  15  * for linking errors see
  16  * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
  17  */
  18
  19 #ifndef _CONFIG_KM_ARM_H
  20 #define _CONFIG_KM_ARM_H
  21
  22 /*
  23  * High Level Configuration Options (easy to change)
  24  */
  25 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  26 #define CONFIG_KW88F6281                /* SOC Name */
  27
  28 #define CONFIG_MACH_TYPE        MACH_TYPE_KM_KIRKWOOD
  29
  30 #define CONFIG_NAND_ECC_BCH
  31
  32 /* include common defines/options for all Keymile boards */
  33 #include "keymile-common.h"
  34
  35 /* Increase max size of compressed kernel */
  36 #define CONFIG_SYS_BOOTM_LEN            (32 << 20)
  37
  38 #include "asm/arch/config.h"
  39
  40 /* architecture specific default bootargs */
  41 #define CONFIG_KM_DEF_BOOT_ARGS_CPU                                     \
  42                 "bootcountaddr=${bootcountaddr} ${mtdparts}"            \
  43                 " boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}"
  44
  45 #define CONFIG_KM_DEF_ENV_CPU                                           \
  46         "u-boot=" CONFIG_HOSTNAME "/u-boot.kwb\0"               \
  47         CONFIG_KM_UPDATE_UBOOT                                          \
  48         "set_fdthigh=setenv fdt_high ${kernelmem}\0"                    \
  49         "checkfdt="                                                     \
  50                 "if cramfsls fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb; " \
  51                 "then true; else setenv cramfsloadfdt true; "           \
  52                 "setenv boot bootm ${load_addr_r}; "                    \
  53                 "echo No FDT found, booting with the kernel "           \
  54                 "appended one; fi\0"                                    \
  55         ""
  56
  57 /*
  58  * For booting Linux, the board info and command line data
  59  * have to be in the first 8 MB of memory, since this is
  60  * the maximum mapped by the Linux kernel during initialization.
  61  */
  62 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs  */
  63 #define CONFIG_INITRD_TAG               /* enable INITRD tag */
  64 #define CONFIG_SETUP_MEMORY_TAGS        /* enable memory tag */
  65
  66 /*
  67  * NAND Flash configuration
  68  */
  69 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  70
  71 /*
  72  * Other required minimal configurations
  73  */
  74
  75 /*
  76  * Ethernet Driver configuration
  77  */
  78 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer autoneg timeout */
  79 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
  80 #define CONFIG_PHY_BASE_ADR     0
  81
  82 /*
  83  * I2C related stuff
  84  */
  85 #undef CONFIG_I2C_MVTWSI
  86 #define CONFIG_SYS_I2C_INIT_BOARD
  87
  88 #define CONFIG_KIRKWOOD_GPIO            /* Enable GPIO Support */
  89 #define CONFIG_SYS_NUM_I2C_BUSES        6
  90 #define CONFIG_SYS_I2C_MAX_HOPS         1
  91 #define CONFIG_SYS_I2C_BUSES    {       {0, {I2C_NULL_HOP} }, \
  92                                         {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
  93                                         {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
  94                                         {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
  95                                         {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
  96                                         {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
  97                                 }
  98
  99 #ifndef __ASSEMBLY__
 100 #include <asm/arch/gpio.h>
 101 #include <linux/delay.h>
 102 #include <linux/stringify.h>
 103 extern void __set_direction(unsigned pin, int high);
 104 #define KM_KIRKWOOD_SDA_PIN     8
 105 #define KM_KIRKWOOD_SCL_PIN     9
 106 #define KM_KIRKWOOD_SOFT_I2C_GPIOS      0x0300
 107 #define KM_KIRKWOOD_ENV_WP      38
 108
 109 #define I2C_ACTIVE      __set_direction(KM_KIRKWOOD_SDA_PIN, 0)
 110 #define I2C_TRISTATE    __set_direction(KM_KIRKWOOD_SDA_PIN, 1)
 111 #define I2C_READ        (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0)
 112 #define I2C_SDA(bit)    kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit)
 113 #define I2C_SCL(bit)    kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit)
 114 #endif
 115
 116 #define I2C_DELAY       udelay(1)
 117 #define I2C_SOFT_DECLARATIONS
 118
 119 /* EEprom support 24C128, 24C256 valid for environment eeprom */
 120 #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
 121
 122 /*
 123  *  Environment variables configurations
 124  */
 125 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
 126 #define CONFIG_ENV_TOTAL_SIZE           0x20000     /* no bracets! */
 127 #else
 128 #define CONFIG_SYS_EEPROM_WREN
 129 #define CONFIG_I2C_ENV_EEPROM_BUS 5 /* I2C2 (Mux-Port 5) */
 130 #endif
 131
 132 #define KM_FLASH_GPIO_PIN       16
 133
 134 #define CONFIG_KM_UPDATE_UBOOT                                          \
 135         "update="                                                       \
 136                 "sf probe 0;sf erase 0 +${filesize};"                   \
 137                 "sf write ${load_addr_r} 0 ${filesize};\0"
 138
 139 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
 140 #define CONFIG_KM_NEW_ENV                                               \
 141         "newenv=sf probe 0;"                                            \
 142                 "sf erase " __stringify(CONFIG_ENV_OFFSET) " "          \
 143                 __stringify(CONFIG_ENV_TOTAL_SIZE)"\0"
 144 #else
 145 #define CONFIG_KM_NEW_ENV                                               \
 146         "newenv=setenv addr 0x100000 && "                               \
 147                 "i2c dev " __stringify(CONFIG_I2C_ENV_EEPROM_BUS) "; "  \
 148                 "mw.b ${addr} 0 4 && "                                  \
 149                 "eeprom write " __stringify(CONFIG_SYS_I2C_EEPROM_ADDR) \
 150                 " ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && "     \
 151                 "eeprom write " __stringify(CONFIG_SYS_I2C_EEPROM_ADDR) \
 152                 " ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0"
 153 #endif
 154
 155 #ifndef CONFIG_KM_BOARD_EXTRA_ENV
 156 #define CONFIG_KM_BOARD_EXTRA_ENV       ""
 157 #endif
 158
 159 /*
 160  * Default environment variables
 161  */
 162 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 163         CONFIG_KM_BOARD_EXTRA_ENV                                       \
 164         CONFIG_KM_DEF_ENV                                               \
 165         CONFIG_KM_NEW_ENV                                               \
 166         "arch=arm\0"                                                    \
 167         ""
 168
 169 /* additions for new relocation code, must be added to all boards */
 170 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 171
 172 /* address for the bootcount (taken from end of RAM) */
 173 #define BOOTCOUNT_ADDR          (CONFIG_KM_RESERVED_PRAM)
 174
 175 /* enable POST tests */
 176 #define CONFIG_POST     (CONFIG_SYS_POST_MEM_REGIONS)
 177 #define CONFIG_POST_SKIP_ENV_FLAGS
 178 #define CONFIG_POST_EXTERNAL_WORD_FUNCS
 179
 180 #endif /* _CONFIG_KM_ARM_H */