include/configs/km/km83xx-common.h

   1 /*
   2  * (C) Copyright 2010
   3  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   4  *
   5  * This program is free software; you can redistribute it and/or
   6  * modify it under the terms of the GNU General Public License as
   7  * published by the Free Software Foundation; either version 2 of
   8  * the License, or (at your option) any later version.
   9  */
  10
  11 #ifndef __CONFIG_KM83XX_H
  12 #define __CONFIG_KM83XX_H
  13
  14 /* include common defines/options for all Keymile boards */
  15 #include "keymile-common.h"
  16 #include "km-powerpc.h"
  17
  18 #define MTDIDS_DEFAULT          "nor0=boot"
  19 #define MTDPARTS_DEFAULT        "mtdparts="                     \
  20         "boot:"                                                 \
  21                 "768k(u-boot),"                                 \
  22                 "128k(env),"                                    \
  23                 "128k(envred),"                                 \
  24                 "-(" CONFIG_KM_UBI_PARTITION_NAME ")"
  25
  26 #define CONFIG_MISC_INIT_R
  27 /*
  28  * System Clock Setup
  29  */
  30 #define CONFIG_83XX_CLKIN               66000000
  31 #define CONFIG_SYS_CLK_FREQ             66000000
  32 #define CONFIG_83XX_PCICLK              66000000
  33
  34 /*
  35  * IMMR new address
  36  */
  37 #define CONFIG_SYS_IMMR         0xE0000000
  38
  39 /*
  40  * Bus Arbitration Configuration Register (ACR)
  41  */
  42 #define CONFIG_SYS_ACR_PIPE_DEP 3       /* pipeline depth 4 transactions */
  43 #define CONFIG_SYS_ACR_RPTCNT   3       /* 4 consecutive transactions */
  44 #define CONFIG_SYS_ACR_APARK    0       /* park bus to master (below) */
  45 #define CONFIG_SYS_ACR_PARKM    3       /* parking master = QuiccEngine */
  46
  47 /*
  48  * DDR Setup
  49  */
  50 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory */
  51 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
  52 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
  53 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   (DDR_SDRAM_CLK_CNTL_SS_EN | \
  54                                         DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
  55
  56 #define CFG_83XX_DDR_USES_CS0
  57
  58 /*
  59  * Manually set up DDR parameters
  60  */
  61 #define CONFIG_DDR_II
  62 #define CONFIG_SYS_DDR_SIZE             2048 /* MB */
  63
  64 /*
  65  * The reserved memory
  66  */
  67 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
  68 #define CONFIG_SYS_FLASH_BASE           0xF0000000
  69
  70 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
  71 #define CONFIG_SYS_RAMBOOT
  72 #endif
  73
  74 /* Reserve 768 kB for Mon */
  75 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
  76
  77 /*
  78  * Initial RAM Base Address Setup
  79  */
  80 #define CONFIG_SYS_INIT_RAM_LOCK
  81 #define CONFIG_SYS_INIT_RAM_ADDR        0xE6000000 /* Initial RAM address */
  82 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000 /* End of used area in RAM */
  83 #define CONFIG_SYS_GBL_DATA_SIZE        0x100 /* num bytes initial data */
  84 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
  85                                                 GENERATED_GBL_DATA_SIZE)
  86
  87 /*
  88  * Init Local Bus Memory Controller:
  89  *
  90  * Bank Bus     Machine PortSz  Size  Device
  91  * ---- ---     ------- ------  -----  ------
  92  *  0   Local   GPCM    16 bit  256MB FLASH
  93  *  1   Local   GPCM     8 bit  128MB GPIO/PIGGY
  94  *
  95  */
  96 /*
  97  * FLASH on the Local Bus
  98  */
  99 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
 100 #define CONFIG_FLASH_CFI_DRIVER         /* use the CFI driver */
 101 #define CONFIG_SYS_FLASH_SIZE           256 /* max FLASH size is 256M */
 102 #define CONFIG_SYS_FLASH_PROTECTION
 103 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 104
 105 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 106 #define CONFIG_SYS_LBLAWAR0_PRELIM      0x8000001b /* 256MB window size */
 107
 108 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE | \
 109                                 (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
 110                                 BR_V)
 111
 112 #define CONFIG_SYS_OR0_PRELIM   (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) | \
 113                                 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
 114                                 OR_GPCM_SCY_5 | \
 115                                 OR_GPCM_TRLX | OR_GPCM_EAD)
 116
 117 #define CONFIG_SYS_MAX_FLASH_BANKS      1   /* max num of flash banks   */
 118 #define CONFIG_SYS_MAX_FLASH_SECT       512 /* max num of sects on one chip */
 119 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
 120
 121 /*
 122  * PRIO1/PIGGY on the local bus CS1
 123  */
 124 /* Window base at flash base */
 125 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_KMBEC_FPGA_BASE
 126 #define CONFIG_SYS_LBLAWAR1_PRELIM      0x8000001A /* 128MB window size */
 127
 128 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_KMBEC_FPGA_BASE | \
 129                                 (1 << BR_PS_SHIFT) | /* 8 bit port size */ \
 130                                 BR_V)
 131 #define CONFIG_SYS_OR1_PRELIM   (MEG_TO_AM(CONFIG_SYS_KMBEC_FPGA_SIZE) | \
 132                                 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
 133                                 OR_GPCM_SCY_2 | \
 134                                 OR_GPCM_TRLX | OR_GPCM_EAD)
 135
 136 /*
 137  * Serial Port
 138  */
 139 #define CONFIG_CONS_INDEX       1
 140 #define CONFIG_SYS_NS16550
 141 #define CONFIG_SYS_NS16550_SERIAL
 142 #define CONFIG_SYS_NS16550_REG_SIZE     1
 143 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 144
 145 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 146 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 147
 148 /* Pass open firmware flat tree */
 149 #define CONFIG_OF_LIBFDT
 150 #define CONFIG_OF_BOARD_SETUP
 151 #define CONFIG_OF_STDOUT_VIA_ALIAS
 152
 153 /*
 154  * QE UEC ethernet configuration
 155  */
 156 #define CONFIG_UEC_ETH
 157 #define CONFIG_ETHPRIME         "UEC0"
 158
 159 #define CONFIG_UEC_ETH1         /* GETH1 */
 160 #define UEC_VERBOSE_DEBUG       1
 161
 162 #ifdef CONFIG_UEC_ETH1
 163 #define CONFIG_SYS_UEC1_UCC_NUM 3       /* UCC4 */
 164 #define CONFIG_SYS_UEC1_RX_CLK          QE_CLK_NONE /* not used in RMII Mode */
 165 #define CONFIG_SYS_UEC1_TX_CLK          QE_CLK17
 166 #define CONFIG_SYS_UEC1_ETH_TYPE        FAST_ETH
 167 #define CONFIG_SYS_UEC1_PHY_ADDR        0
 168 #define CONFIG_SYS_UEC1_INTERFACE_TYPE  PHY_INTERFACE_MODE_RMII
 169 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 170 #endif
 171
 172 /*
 173  * Environment
 174  */
 175
 176 #ifndef CONFIG_SYS_RAMBOOT
 177 #define CONFIG_ENV_IS_IN_FLASH
 178 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + \
 179                                         CONFIG_SYS_MONITOR_LEN)
 180 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
 181 #define CONFIG_ENV_OFFSET       (CONFIG_SYS_MONITOR_LEN)
 182
 183 /* Address and size of Redundant Environment Sector     */
 184 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + \
 185                                                 CONFIG_ENV_SECT_SIZE)
 186 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 187
 188 #else /* CFG_SYS_RAMBOOT */
 189 #define CONFIG_SYS_NO_FLASH             /* Flash is not usable now */
 190 #define CONFIG_ENV_IS_NOWHERE           /* Store ENV in memory only */
 191 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 192 #define CONFIG_ENV_SIZE         0x2000
 193 #endif /* CFG_SYS_RAMBOOT */
 194
 195 /* I2C */
 196 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 197 #define CONFIG_FSL_I2C
 198 #define CONFIG_SYS_I2C_SPEED    200000  /* I2C speed and slave address */
 199 #define CONFIG_SYS_I2C_SLAVE    0x7F
 200 #define CONFIG_SYS_I2C_OFFSET   0x3000
 201
 202 /* I2C SYSMON (LM75, AD7414 is almost compatible) */
 203 #define CONFIG_DTT_LM75         /* ON Semi's LM75 */
 204 #define CONFIG_DTT_SENSORS      {0, 1, 2, 3}    /* Sensor addresses */
 205 #define CONFIG_SYS_DTT_MAX_TEMP 70
 206 #define CONFIG_SYS_DTT_LOW_TEMP -30
 207 #define CONFIG_SYS_DTT_HYSTERESIS       3
 208 #define CONFIG_SYS_DTT_BUS_NUM          (CONFIG_SYS_MAX_I2C_BUS)
 209
 210 #if defined(CONFIG_CMD_NAND)
 211 #define CONFIG_NAND_KMETER1
 212 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 213 #define CONFIG_SYS_NAND_BASE            CONFIG_SYS_KMBEC_FPGA_BASE
 214 #endif
 215
 216 #if defined(CONFIG_PCI)
 217 #define CONFIG_CMD_PCI
 218 #endif
 219
 220 /*
 221  * For booting Linux, the board info and command line data
 222  * have to be in the first 8 MB of memory, since this is
 223  * the maximum mapped by the Linux kernel during initialization.
 224  */
 225 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)
 226
 227 /*
 228  * Core HID Setup
 229  */
 230 #define CONFIG_SYS_HID0_INIT            0x000000000
 231 #define CONFIG_SYS_HID0_FINAL           (HID0_ENABLE_MACHINE_CHECK | \
 232                                          HID0_ENABLE_INSTRUCTION_CACHE)
 233 #define CONFIG_SYS_HID2                 HID2_HBE
 234
 235 /*
 236  * MMU Setup
 237  */
 238
 239 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 240
 241 /* DDR: cache cacheable */
 242 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \
 243                                 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 244 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \
 245                                         BATU_VS | BATU_VP)
 246 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 247 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 248
 249 /* IMMRBAR & PCI IO: cache-inhibit and guarded */
 250 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_IMMR | BATL_PP_10 | \
 251                                 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 252 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS \
 253                                         | BATU_VP)
 254 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 255 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 256
 257 /* PRIO1, PIGGY:  icache cacheable, but dcache-inhibit and guarded */
 258 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_10 | \
 259                                 BATL_MEMCOHERENCE)
 260 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_KMBEC_FPGA_BASE | BATU_BL_128M | \
 261                                 BATU_VS | BATU_VP)
 262 #define CONFIG_SYS_DBAT2L       (CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_10 | \
 263                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 264 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 265
 266 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
 267 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
 268                                         BATL_MEMCOHERENCE)
 269 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | \
 270                                         BATU_VS | BATU_VP)
 271 #define CONFIG_SYS_DBAT3L       (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
 272                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 273 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 274
 275 /* Stack in dcache: cacheable, no memory coherence */
 276 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
 277 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \
 278                                         BATU_VS | BATU_VP)
 279 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 280 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 281
 282 /*
 283  * Internal Definitions
 284  */
 285 #define BOOTFLASH_START 0xF0000000
 286
 287 #define CONFIG_KM_CONSOLE_TTY   "ttyS0"
 288
 289 /*
 290  * Environment Configuration
 291  */
 292 #define CONFIG_ENV_OVERWRITE
 293 #ifndef CONFIG_KM_DEF_ENV               /* if not set by keymile-common.h */
 294 #define CONFIG_KM_DEF_ENV "km-common=empty\0"
 295 #endif
 296
 297 #ifndef CONFIG_KM_DEF_ARCH
 298 #define CONFIG_KM_DEF_ARCH      "arch=ppc_82xx\0"
 299 #endif
 300
 301 #define CONFIG_EXTRA_ENV_SETTINGS \
 302         CONFIG_KM_DEF_ENV                                               \
 303         CONFIG_KM_DEF_ARCH                                              \
 304         "dtt_bus=pca9547:70:a\0"                                        \
 305         "EEprom_ivm=pca9547:70:9\0"                                     \
 306         "newenv="                                                       \
 307                 "prot off 0xF00C0000 +0x40000 && "                      \
 308                 "era 0xF00C0000 +0x40000\0"                             \
 309         "unlock=yes\0"                                                  \
 310         ""
 311
 312 #if defined(CONFIG_UEC_ETH)
 313 #define CONFIG_HAS_ETH0
 314 #endif
 315
 316 #endif /* __CONFIG_KM83XX_H */