Merge branch 'master' of git://git.denx.de/u-boot-i2c
[platform/kernel/u-boot.git] / include / configs / kilauea.h
1 /*
2  * Copyright (c) 2008 Nuovation System Designs, LLC
3  *   Grant Erickson <gerickson@nuovations.com>
4  *
5  * (C) Copyright 2007
6  * Stefan Roese, DENX Software Engineering, sr@denx.de.
7  *
8  * See file CREDITS for list of people who contributed to this
9  * project.
10  *
11  * This program is free software; you can redistribute it and/or
12  * modify it under the terms of the GNU General Public License as
13  * published by the Free Software Foundation; either version 2 of
14  * the License, or (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  * GNU General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24  * MA 02111-1307 USA
25  */
26
27 /************************************************************************
28  * kilauea.h - configuration for AMCC Kilauea (405EX)
29  ***********************************************************************/
30
31 #ifndef __CONFIG_H
32 #define __CONFIG_H
33
34 /*-----------------------------------------------------------------------
35  * High Level Configuration Options
36  *----------------------------------------------------------------------*/
37 #define CONFIG_KILAUEA          1               /* Board is Kilauea     */
38 #define CONFIG_4xx              1               /* ... PPC4xx family    */
39 #define CONFIG_405EX            1               /* Specifc 405EX support*/
40 #define CONFIG_SYS_CLK_FREQ     33333333        /* ext frequency to pll */
41
42 /*
43  * Include common defines/options for all AMCC eval boards
44  */
45 #define CONFIG_HOSTNAME         kilauea
46 #include "amcc-common.h"
47
48 #define CONFIG_BOARD_EARLY_INIT_F 1             /* Call board_early_init_f */
49 #define CONFIG_MISC_INIT_R      1               /* Call misc_init_r     */
50 #define CONFIG_BOARD_EMAC_COUNT
51
52 /*-----------------------------------------------------------------------
53  * Base addresses -- Note these are effective addresses where the
54  * actual resources get mapped (not physical addresses)
55  *----------------------------------------------------------------------*/
56 #define CONFIG_SYS_FLASH_BASE           0xFC000000
57 #define CONFIG_SYS_NAND_ADDR            0xF8000000
58 #define CONFIG_SYS_FPGA_BASE            0xF0000000
59 #define CONFIG_SYS_PERIPHERAL_BASE      0xEF600000      /* internal peripherals*/
60
61 /*-----------------------------------------------------------------------
62  * Initial RAM & Stack Pointer Configuration Options
63  *
64  *   There are traditionally three options for the primordial
65  *   (i.e. initial) stack usage on the 405-series:
66  *
67  *      1) On-chip Memory (OCM) (i.e. SRAM)
68  *      2) Data cache
69  *      3) SDRAM
70  *
71  *   For the 405EX(r), there is no OCM, so we are left with (2) or (3)
72  *   the latter of which is less than desireable since it requires
73  *   setting up the SDRAM and ECC in assembly code.
74  *
75  *   To use (2), define 'CONFIG_SYS_INIT_DCACHE_CS' to be an unused chip
76  *   select on the External Bus Controller (EBC) and then select a
77  *   value for 'CONFIG_SYS_INIT_RAM_ADDR' outside of the range of valid,
78  *   physical SDRAM. Otherwise, undefine 'CONFIG_SYS_INIT_DCACHE_CS' and
79  *   select a value for 'CONFIG_SYS_INIT_RAM_ADDR' within the range of valid,
80  *   physical SDRAM to use (3).
81  *-----------------------------------------------------------------------*/
82
83 #define CONFIG_SYS_INIT_DCACHE_CS       4
84
85 #if defined(CONFIG_SYS_INIT_DCACHE_CS)
86 #define CONFIG_SYS_INIT_RAM_ADDR        (CONFIG_SYS_SDRAM_BASE + ( 1 << 30))    /*  1 GiB */
87 #else
88 #define CONFIG_SYS_INIT_RAM_ADDR        (CONFIG_SYS_SDRAM_BASE + (32 << 20))    /* 32 MiB */
89 #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
90
91 #define CONFIG_SYS_INIT_RAM_END        (4 << 10)                        /*  4 KiB */
92 #define CONFIG_SYS_GBL_DATA_SIZE        256             /* num bytes initial data */
93 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
94
95 /*
96  * If the data cache is being used for the primordial stack and global
97  * data area, the POST word must be placed somewhere else. The General
98  * Purpose Timer (GPT) is unused by u-boot and the kernel and preserves
99  * its compare and mask register contents across reset, so it is used
100  * for the POST word.
101  */
102
103 #if defined(CONFIG_SYS_INIT_DCACHE_CS)
104 # define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
105 # define CONFIG_SYS_POST_ALT_WORD_ADDR  (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
106 #else
107 # define CONFIG_SYS_INIT_EXTRA_SIZE     16
108 # define CONFIG_SYS_INIT_SP_OFFSET      (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE)
109 # define CONFIG_SYS_POST_WORD_ADDR      (CONFIG_SYS_GBL_DATA_OFFSET - 4)
110 # define CONFIG_SYS_OCM_DATA_ADDR       CONFIG_SYS_INIT_RAM_ADDR
111 #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
112
113 /*-----------------------------------------------------------------------
114  * Serial Port
115  *----------------------------------------------------------------------*/
116 #define CONFIG_SYS_EXT_SERIAL_CLOCK     11059200        /* ext. 11.059MHz clk   */
117 /* define this if you want console on UART1 */
118 #undef CONFIG_UART1_CONSOLE
119
120 /*-----------------------------------------------------------------------
121  * Environment
122  *----------------------------------------------------------------------*/
123 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
124 #define CONFIG_ENV_IS_IN_FLASH     1    /* use FLASH for environment vars       */
125 #else
126 #define CONFIG_ENV_IS_IN_NAND   1       /* use NAND for environment vars        */
127 #define CONFIG_ENV_IS_EMBEDDED  1       /* use embedded environment */
128 #endif
129
130 /*-----------------------------------------------------------------------
131  * FLASH related
132  *----------------------------------------------------------------------*/
133 #define CONFIG_SYS_FLASH_CFI                    /* The flash is CFI compatible  */
134 #define CONFIG_FLASH_CFI_DRIVER         /* Use common CFI driver        */
135
136 #define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
137 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
138 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max number of sectors on one chip    */
139
140 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
141 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
142
143 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1     /* use buffered writes (20x faster)     */
144 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* print 'E' for empty sector on flinfo */
145
146 #ifdef CONFIG_ENV_IS_IN_FLASH
147 #define CONFIG_ENV_SECT_SIZE    0x20000 /* size of one complete sector  */
148 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
149 #define CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment Sector     */
150
151 /* Address and size of Redundant Environment Sector     */
152 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
153 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
154 #endif /* CONFIG_ENV_IS_IN_FLASH */
155
156 /*
157  * IPL (Initial Program Loader, integrated inside CPU)
158  * Will load first 4k from NAND (SPL) into cache and execute it from there.
159  *
160  * SPL (Secondary Program Loader)
161  * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
162  * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
163  * controller and the NAND controller so that the special U-Boot image can be
164  * loaded from NAND to SDRAM.
165  *
166  * NUB (NAND U-Boot)
167  * This NAND U-Boot (NUB) is a special U-Boot version which can be started
168  * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
169  *
170  * On 405EX the SPL is copied to SDRAM before the NAND controller is
171  * set up. While still running from location 0xfffff000...0xffffffff the
172  * NAND controller cannot be accessed since it is attached to CS0 too.
173  */
174 #define CONFIG_SYS_NAND_BOOT_SPL_SRC    0xfffff000      /* SPL location                 */
175 #define CONFIG_SYS_NAND_BOOT_SPL_SIZE   (4 << 10)       /* SPL size                     */
176 #define CONFIG_SYS_NAND_BOOT_SPL_DST    0x00800000      /* Copy SPL here                */
177 #define CONFIG_SYS_NAND_U_BOOT_DST      0x01000000      /* Load NUB to this addr        */
178 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from this addr  */
179 #define CONFIG_SYS_NAND_BOOT_SPL_DELTA  (CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST)
180
181 /*
182  * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
183  */
184 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (16 << 10)      /* Offset to RAM U-Boot image   */
185 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (384 << 10)     /* Size of RAM U-Boot image     */
186
187 /*
188  * Now the NAND chip has to be defined (no autodetection used!)
189  */
190 #define CONFIG_SYS_NAND_PAGE_SIZE       512             /* NAND chip page size          */
191 #define CONFIG_SYS_NAND_BLOCK_SIZE      (16 << 10)      /* NAND chip block size         */
192 #define CONFIG_SYS_NAND_PAGE_COUNT      32              /* NAND chip page count         */
193 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   5               /* Location of bad block marker */
194 #define CONFIG_SYS_NAND_4_ADDR_CYCLE    1               /* Fourth addr used (>32MB)     */
195
196 #define CONFIG_SYS_NAND_ECCSIZE 256
197 #define CONFIG_SYS_NAND_ECCBYTES        3
198 #define CONFIG_SYS_NAND_ECCSTEPS        (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
199 #define CONFIG_SYS_NAND_OOBSIZE 16
200 #define CONFIG_SYS_NAND_ECCTOTAL        (CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
201 #define CONFIG_SYS_NAND_ECCPOS          {0, 1, 2, 3, 6, 7}
202
203 #ifdef CONFIG_ENV_IS_IN_NAND
204 /*
205  * For NAND booting the environment is embedded in the U-Boot image. Please take
206  * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
207  */
208 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
209 #define CONFIG_ENV_OFFSET               (CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE)
210 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
211 #endif
212
213 /*-----------------------------------------------------------------------
214  * NAND FLASH
215  *----------------------------------------------------------------------*/
216 #define CONFIG_SYS_MAX_NAND_DEVICE      1
217 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
218 #define CONFIG_SYS_NAND_SELECT_DEVICE  1        /* nand driver supports mutipl. chips   */
219
220 #define CONFIG_SYS_64BIT_VSPRINTF       /* needed for nand_util.c */
221
222 /*-----------------------------------------------------------------------
223  * DDR SDRAM
224  *----------------------------------------------------------------------*/
225 #define CONFIG_SYS_MBYTES_SDRAM        (256)            /* 256MB                        */
226
227 /*
228  * CONFIG_PPC4xx_DDR_AUTOCALIBRATION
229  *
230  * Note: DDR Autocalibration Method_A scans the full range of possible PPC4xx
231  *       SDRAM Controller DDR autocalibration values and takes a lot longer
232  *       to run than Method_B.
233  * (See the Method_A and Method_B algorithm discription in the file:
234  *      cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c)
235  * Define CONFIG_PPC4xx_DDR_METHOD_A to use DDR autocalibration Method_A
236  *
237  * DDR Autocalibration Method_B is the default.
238  */
239 #define CONFIG_PPC4xx_DDR_AUTOCALIBRATION       /* IBM DDR autocalibration */
240 #define DEBUG_PPC4xx_DDR_AUTOCALIBRATION        /* dynamic DDR autocal debug */
241 #undef  CONFIG_PPC4xx_DDR_METHOD_A
242
243 #define CONFIG_SYS_SDRAM0_MB0CF_BASE    ((  0 << 20) + CONFIG_SYS_SDRAM_BASE)
244
245 /* DDR1/2 SDRAM Device Control Register Data Values */
246 #define CONFIG_SYS_SDRAM0_MB0CF ((CONFIG_SYS_SDRAM0_MB0CF_BASE >> 3)    | \
247                                  SDRAM_RXBAS_SDSZ_256MB         | \
248                                  SDRAM_RXBAS_SDAM_MODE7         | \
249                                  SDRAM_RXBAS_SDBE_ENABLE)
250 #define CONFIG_SYS_SDRAM0_MB1CF SDRAM_RXBAS_SDBE_DISABLE
251 #define CONFIG_SYS_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE
252 #define CONFIG_SYS_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE
253 #define CONFIG_SYS_SDRAM0_MCOPT1        (SDRAM_MCOPT1_PMU_OPEN          | \
254                                  SDRAM_MCOPT1_8_BANKS           | \
255                                  SDRAM_MCOPT1_DDR2_TYPE         | \
256                                  SDRAM_MCOPT1_QDEP              | \
257                                  SDRAM_MCOPT1_DCOO_DISABLED)
258 #define CONFIG_SYS_SDRAM0_MCOPT2        0x00000000
259 #define CONFIG_SYS_SDRAM0_MODT0 (SDRAM_MODT_EB0W_ENABLE | \
260                                  SDRAM_MODT_EB0R_ENABLE)
261 #define CONFIG_SYS_SDRAM0_MODT1 0x00000000
262 #define CONFIG_SYS_SDRAM0_CODT          (SDRAM_CODT_RK0R_ON             | \
263                                  SDRAM_CODT_CKLZ_36OHM          | \
264                                  SDRAM_CODT_DQS_1_8_V_DDR2      | \
265                                  SDRAM_CODT_IO_NMODE)
266 #define CONFIG_SYS_SDRAM0_RTR           SDRAM_RTR_RINT_ENCODE(1560)
267 #define CONFIG_SYS_SDRAM0_INITPLR0      (SDRAM_INITPLR_ENABLE                   | \
268                 SDRAM_INITPLR_IMWT_ENCODE(80)                           | \
269                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_NOP))
270 #define CONFIG_SYS_SDRAM0_INITPLR1      (SDRAM_INITPLR_ENABLE                   | \
271                 SDRAM_INITPLR_IMWT_ENCODE(3)                            | \
272                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE)          | \
273                 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)                   | \
274                 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
275 #define CONFIG_SYS_SDRAM0_INITPLR2      (SDRAM_INITPLR_ENABLE                   | \
276                 SDRAM_INITPLR_IMWT_ENCODE(2)                            | \
277                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                | \
278                 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR2)                 | \
279                 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR2_TEMP_COMMERCIAL))
280 #define CONFIG_SYS_SDRAM0_INITPLR3      (SDRAM_INITPLR_ENABLE                   | \
281                 SDRAM_INITPLR_IMWT_ENCODE(2)                            | \
282                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                | \
283                 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR3)                 | \
284                 SDRAM_INITPLR_IMA_ENCODE(0))
285 #define CONFIG_SYS_SDRAM0_INITPLR4      (SDRAM_INITPLR_ENABLE                   | \
286                 SDRAM_INITPLR_IMWT_ENCODE(2)                            | \
287                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                | \
288                 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)                  | \
289                 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_DQS_DISABLE | \
290                                          JEDEC_MA_EMR_RTT_75OHM))
291 #define CONFIG_SYS_SDRAM0_INITPLR5      (SDRAM_INITPLR_ENABLE                   | \
292                 SDRAM_INITPLR_IMWT_ENCODE(2)                            | \
293                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                | \
294                 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)                   | \
295                 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \
296                                          JEDEC_MA_MR_CL_DDR2_4_0_CLK | \
297                                          JEDEC_MA_MR_BLEN_4 | \
298                                          JEDEC_MA_MR_DLL_RESET))
299 #define CONFIG_SYS_SDRAM0_INITPLR6      (SDRAM_INITPLR_ENABLE                   | \
300                 SDRAM_INITPLR_IMWT_ENCODE(3)                            | \
301                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE)          | \
302                 SDRAM_INITPLR_IBA_ENCODE(0x0)                           | \
303                 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
304 #define CONFIG_SYS_SDRAM0_INITPLR7      (SDRAM_INITPLR_ENABLE                   | \
305                 SDRAM_INITPLR_IMWT_ENCODE(26)                           | \
306                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
307 #define CONFIG_SYS_SDRAM0_INITPLR8      (SDRAM_INITPLR_ENABLE                   | \
308                 SDRAM_INITPLR_IMWT_ENCODE(26)                           | \
309                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
310 #define CONFIG_SYS_SDRAM0_INITPLR9      (SDRAM_INITPLR_ENABLE                   | \
311                 SDRAM_INITPLR_IMWT_ENCODE(26)                           | \
312                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
313 #define CONFIG_SYS_SDRAM0_INITPLR10     (SDRAM_INITPLR_ENABLE                   | \
314                 SDRAM_INITPLR_IMWT_ENCODE(26)                           | \
315                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
316 #define CONFIG_SYS_SDRAM0_INITPLR11     (SDRAM_INITPLR_ENABLE                   | \
317                 SDRAM_INITPLR_IMWT_ENCODE(2)                            | \
318                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                | \
319                 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)                   | \
320                 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \
321                                          JEDEC_MA_MR_CL_DDR2_4_0_CLK | \
322                                          JEDEC_MA_MR_BLEN_4))
323 #define CONFIG_SYS_SDRAM0_INITPLR12     (SDRAM_INITPLR_ENABLE                   | \
324                 SDRAM_INITPLR_IMWT_ENCODE(2)                            | \
325                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                | \
326                 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)                  | \
327                 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_ENTER | \
328                                          JEDEC_MA_EMR_RDQS_DISABLE | \
329                                          JEDEC_MA_EMR_DQS_DISABLE | \
330                                          JEDEC_MA_EMR_RTT_DISABLED | \
331                                          JEDEC_MA_EMR_ODS_NORMAL))
332 #define CONFIG_SYS_SDRAM0_INITPLR13     (SDRAM_INITPLR_ENABLE                   | \
333                 SDRAM_INITPLR_IMWT_ENCODE(2)                            | \
334                 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                | \
335                 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)                  | \
336                 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_EXIT | \
337                                          JEDEC_MA_EMR_RDQS_DISABLE | \
338                                          JEDEC_MA_EMR_DQS_DISABLE | \
339                                          JEDEC_MA_EMR_RTT_DISABLED | \
340                                          JEDEC_MA_EMR_ODS_NORMAL))
341 #define CONFIG_SYS_SDRAM0_INITPLR14     (SDRAM_INITPLR_DISABLE)
342 #define CONFIG_SYS_SDRAM0_INITPLR15     (SDRAM_INITPLR_DISABLE)
343 #define CONFIG_SYS_SDRAM0_RQDC          (SDRAM_RQDC_RQDE_ENABLE | \
344                                  SDRAM_RQDC_RQFD_ENCODE(56))
345 #define CONFIG_SYS_SDRAM0_RFDC          SDRAM_RFDC_RFFD_ENCODE(521)
346 #define CONFIG_SYS_SDRAM0_RDCC          (SDRAM_RDCC_RDSS_T2)
347 #define CONFIG_SYS_SDRAM0_DLCR          (SDRAM_DLCR_DCLM_AUTO           | \
348                                  SDRAM_DLCR_DLCS_CONT_DONE      | \
349                                  SDRAM_DLCR_DLCV_ENCODE(165))
350 #define CONFIG_SYS_SDRAM0_CLKTR (SDRAM_CLKTR_CLKP_180_DEG_ADV)
351 #define CONFIG_SYS_SDRAM0_WRDTR 0x00000000
352 #define CONFIG_SYS_SDRAM0_SDTR1 (SDRAM_SDTR1_LDOF_2_CLK | \
353                                  SDRAM_SDTR1_RTW_2_CLK  | \
354                                  SDRAM_SDTR1_RTRO_1_CLK)
355 #define CONFIG_SYS_SDRAM0_SDTR2 (SDRAM_SDTR2_RCD_3_CLK          | \
356                                  SDRAM_SDTR2_WTR_2_CLK          | \
357                                  SDRAM_SDTR2_XSNR_32_CLK        | \
358                                  SDRAM_SDTR2_WPC_4_CLK          | \
359                                  SDRAM_SDTR2_RPC_2_CLK          | \
360                                  SDRAM_SDTR2_RP_3_CLK           | \
361                                  SDRAM_SDTR2_RRD_2_CLK)
362 #define CONFIG_SYS_SDRAM0_SDTR3 (SDRAM_SDTR3_RAS_ENCODE(8)      | \
363                                  SDRAM_SDTR3_RC_ENCODE(11)      | \
364                                  SDRAM_SDTR3_XCS                | \
365                                  SDRAM_SDTR3_RFC_ENCODE(26))
366 #define CONFIG_SYS_SDRAM0_MMODE (SDRAM_MMODE_WR_DDR2_3_CYC | \
367                                  SDRAM_MMODE_DCL_DDR2_4_0_CLK | \
368                                  SDRAM_MMODE_BLEN_4)
369 #define CONFIG_SYS_SDRAM0_MEMODE        (SDRAM_MEMODE_DQS_DISABLE | \
370                                  SDRAM_MEMODE_RTT_75OHM)
371
372 /*-----------------------------------------------------------------------
373  * I2C
374  *----------------------------------------------------------------------*/
375 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address  */
376
377 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   6       /* 24C02 requires 5ms delay */
378 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x52    /* I2C boot EEPROM (24C02BN)    */
379 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1       /* Bytes of address             */
380
381 /* Standard DTT sensor configuration */
382 #define CONFIG_DTT_DS1775       1
383 #define CONFIG_DTT_SENSORS      { 0 }
384 #define CONFIG_SYS_I2C_DTT_ADDR 0x48
385
386 /* RTC configuration */
387 #define CONFIG_RTC_DS1338       1
388 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
389
390 /*-----------------------------------------------------------------------
391  * Ethernet
392  *----------------------------------------------------------------------*/
393 #define CONFIG_M88E1111_PHY     1
394 #define CONFIG_IBM_EMAC4_V4     1
395 #define CONFIG_EMAC_PHY_MODE    EMAC_PHY_MODE_RGMII_RGMII
396 #define CONFIG_PHY_ADDR         1       /* PHY address, See schematics  */
397
398 #define CONFIG_PHY_RESET        1       /* reset phy upon startup       */
399 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
400
401 #define CONFIG_HAS_ETH0         1
402
403 #define CONFIG_HAS_ETH1         1       /* add support for "eth1addr"   */
404 #define CONFIG_PHY1_ADDR        2
405
406 /* Debug messages for the DDR autocalibration */
407 #define CONFIG_AUTOCALIB                "silent\0"  /* default is non-verbose */
408
409 /*
410  * Default environment variables
411  */
412 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
413         CONFIG_AMCC_DEF_ENV                                             \
414         CONFIG_AMCC_DEF_ENV_POWERPC                                     \
415         CONFIG_AMCC_DEF_ENV_PPC_OLD                                     \
416         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
417         CONFIG_AMCC_DEF_ENV_NAND_UPD                                    \
418         "logversion=2\0"                                                \
419         "kernel_addr=fc000000\0"                                        \
420         "fdt_addr=fc1e0000\0"                                           \
421         "ramdisk_addr=fc200000\0"                                       \
422         "pciconfighost=1\0"                                             \
423         "pcie_mode=RP:RP\0"                                             \
424         ""
425
426 /*
427  * Commands additional to the ones defined in amcc-common.h
428  */
429 #define CONFIG_CMD_DATE
430 #define CONFIG_CMD_LOG
431 #define CONFIG_CMD_NAND
432 #define CONFIG_CMD_PCI
433 #define CONFIG_CMD_SNTP
434
435 /*
436  * Don't run the memory POST on the NAND-booting version. It will
437  * overwrite part of the U-Boot image which is already loaded from NAND
438  * to SDRAM.
439  */
440 #if defined(CONFIG_NAND_U_BOOT)
441 #define CONFIG_SYS_POST_MEMORY_ON       0
442 #else
443 #define CONFIG_SYS_POST_MEMORY_ON       CONFIG_SYS_POST_MEMORY
444 #endif
445
446 /* POST support */
447 #define CONFIG_POST             (CONFIG_SYS_POST_CACHE          | \
448                                  CONFIG_SYS_POST_CPU            | \
449                                  CONFIG_SYS_POST_ETHER          | \
450                                  CONFIG_SYS_POST_I2C            | \
451                                  CONFIG_SYS_POST_MEMORY_ON      | \
452                                  CONFIG_SYS_POST_UART)
453
454 /* Define here the base-addresses of the UARTs to test in POST */
455 #define CONFIG_SYS_POST_UART_TABLE      {UART0_BASE, UART1_BASE}
456
457 #define CONFIG_LOGBUFFER
458 #define CONFIG_SYS_POST_CACHE_ADDR      0x00800000 /* free virtual address      */
459
460 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
461
462 /*-----------------------------------------------------------------------
463  * PCI stuff
464  *----------------------------------------------------------------------*/
465 #define CONFIG_PCI                      /* include pci support          */
466 #define CONFIG_PCI_PNP          1       /* do pci plug-and-play         */
467 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup  */
468 #define CONFIG_PCI_CONFIG_HOST_BRIDGE
469
470 /*-----------------------------------------------------------------------
471  * PCIe stuff
472  *----------------------------------------------------------------------*/
473 #define CONFIG_SYS_PCIE_MEMBASE 0x90000000      /* mapped PCIe memory   */
474 #define CONFIG_SYS_PCIE_MEMSIZE 0x08000000      /* 128 Meg, smallest incr per port */
475
476 #define CONFIG_SYS_PCIE0_CFGBASE        0xa0000000      /* remote access */
477 #define CONFIG_SYS_PCIE0_XCFGBASE       0xb0000000      /* local access */
478 #define CONFIG_SYS_PCIE0_CFGMASK        0xe0000001      /* 512 Meg */
479
480 #define CONFIG_SYS_PCIE1_CFGBASE        0xc0000000      /* remote access */
481 #define CONFIG_SYS_PCIE1_XCFGBASE       0xd0000000      /* local access */
482 #define CONFIG_SYS_PCIE1_CFGMASK        0xe0000001      /* 512 Meg */
483
484 #define CONFIG_SYS_PCIE0_UTLBASE        0xef502000
485 #define CONFIG_SYS_PCIE1_UTLBASE        0xef503000
486
487 /* base address of inbound PCIe window */
488 #define CONFIG_SYS_PCIE_INBOUND_BASE    0x0000000000000000ULL
489
490 /*-----------------------------------------------------------------------
491  * External Bus Controller (EBC) Setup
492  *----------------------------------------------------------------------*/
493 #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
494 /* booting from NAND, so NAND chips select has to be on CS 0 */
495 #define CONFIG_SYS_NAND_CS              0               /* NAND chip connected to CSx   */
496
497 /* Memory Bank 1 (NOR-FLASH) initialization                                     */
498 #define CONFIG_SYS_EBC_PB1AP            0x05806500
499 #define CONFIG_SYS_EBC_PB1CR           0xFC0DA000  /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/
500
501 /* Memory Bank 0 (NAND-FLASH) initialization                                    */
502 #define CONFIG_SYS_EBC_PB0AP            0x018003c0
503 #define CONFIG_SYS_EBC_PB0CR            (CONFIG_SYS_NAND_ADDR | 0x1e000)
504 #else
505 #define CONFIG_SYS_NAND_CS              1               /* NAND chip connected to CSx   */
506
507 /* Memory Bank 0 (NOR-FLASH) initialization                                     */
508 #define CONFIG_SYS_EBC_PB0AP            0x05806500
509 #define CONFIG_SYS_EBC_PB0CR           0xFC0DA000  /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/
510
511 /* Memory Bank 1 (NAND-FLASH) initialization                                    */
512 #define CONFIG_SYS_EBC_PB1AP            0x018003c0
513 #define CONFIG_SYS_EBC_PB1CR            (CONFIG_SYS_NAND_ADDR | 0x1e000)
514 #endif
515
516 /* Memory Bank 2 (FPGA) initialization                                          */
517 #define CONFIG_SYS_EBC_PB2AP           0x9400C800
518 #define CONFIG_SYS_EBC_PB2CR            (CONFIG_SYS_FPGA_BASE | 0x18000)
519
520 #define CONFIG_SYS_EBC_CFG              0x7FC00000 /*  EBC0_CFG */
521
522 /*-----------------------------------------------------------------------
523  * GPIO Setup
524  *----------------------------------------------------------------------*/
525 #define CONFIG_SYS_4xx_GPIO_TABLE { /*    Out             GPIO  Alternate1      Alternate2      Alternate3 */ \
526 {                                                                                       \
527 /* GPIO Core 0 */                                                                       \
528 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO0 EBC_DATA_PAR(0)                 */      \
529 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO1 EBC_DATA_PAR(1)                 */      \
530 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO2 EBC_DATA_PAR(2)                 */      \
531 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO3 EBC_DATA_PAR(3)                 */      \
532 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO4 EBC_DATA(20)    USB2_DATA(4)    */      \
533 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO5 EBC_DATA(21)    USB2_DATA(5)    */      \
534 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO6 EBC_DATA(22)    USB2_DATA(6)    */      \
535 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO7 EBC_DATA(23)    USB2_DATA(7)    */      \
536 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 CS(1)/NFCE(1)   IRQ(7)          */      \
537 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 CS(2)/NFCE(2)   IRQ(8)          */      \
538 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 CS(3)/NFCE(3)  IRQ(9)          */      \
539 {GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 IRQ(6)                         */      \
540 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO12 EBC_DATA(16)   USB2_DATA(0)    */      \
541 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO13 EBC_DATA(17)   USB2_DATA(1)    */      \
542 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO14 EBC_DATA(18)   USB2_DATA(2)    */      \
543 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO15 EBC_DATA(19)   USB2_DATA(3)    */      \
544 {GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 UART0_DCD      UART1_CTS       */      \
545 {GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 UART0_DSR      UART1_RTS       */      \
546 {GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 UART0_CTS                      */      \
547 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 UART0_RTS                      */      \
548 {GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO20 UART0_DTR      UART1_TX        */      \
549 {GPIO0_BASE, GPIO_IN,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO21 UART0_RI       UART1_RX        */      \
550 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO22 EBC_HOLD_REQ   DMA_ACK2        */      \
551 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO23 EBC_HOLD_ACK   DMA_REQ2        */      \
552 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO24 EBC_EXT_REQ    DMA_EOT2        IRQ(4) */ \
553 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO25 EBC_EXT_ACK    DMA_ACK3        IRQ(3) */ \
554 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 EBC_ADDR(5)    DMA_EOT0        TS(3) */ \
555 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO27 EBC_BUS_REQ    DMA_EOT3        IRQ(5) */ \
556 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO28                                */      \
557 {GPIO0_BASE, GPIO_IN,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO29 DMA_EOT1       IRQ(2)          */      \
558 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO30 DMA_REQ1       IRQ(1)          */      \
559 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO31 DMA_ACK1       IRQ(0)          */      \
560 }                                                                                               \
561 }
562
563 /*-----------------------------------------------------------------------
564  * Some Kilauea stuff..., mainly fpga registers
565  */
566 #define CONFIG_SYS_FPGA_REG_BASE                CONFIG_SYS_FPGA_BASE
567 #define CONFIG_SYS_FPGA_FIFO_BASE               (in32(CONFIG_SYS_FPGA_BASE) | (1 << 10))
568
569 /* interrupt */
570 #define CONFIG_SYS_FPGA_SLIC0_R_DPRAM_INT       0x80000000
571 #define CONFIG_SYS_FPGA_SLIC0_W_DPRAM_INT       0x40000000
572 #define CONFIG_SYS_FPGA_SLIC1_R_DPRAM_INT       0x20000000
573 #define CONFIG_SYS_FPGA_SLIC1_W_DPRAM_INT       0x10000000
574 #define CONFIG_SYS_FPGA_PHY0_INT                0x08000000
575 #define CONFIG_SYS_FPGA_PHY1_INT                0x04000000
576 #define CONFIG_SYS_FPGA_SLIC0_INT               0x02000000
577 #define CONFIG_SYS_FPGA_SLIC1_INT               0x01000000
578
579 /* DPRAM setting */
580 /* 00: 32B; 01: 64B; 10: 128B; 11: 256B  */
581 #define CONFIG_SYS_FPGA_DPRAM_R_INT_LINE        0x00400000      /* 64 B */
582 #define CONFIG_SYS_FPGA_DPRAM_W_INT_LINE        0x00100000      /* 64 B */
583 #define CONFIG_SYS_FPGA_DPRAM_RW_TYPE           0x00080000
584 #define CONFIG_SYS_FPGA_DPRAM_RST               0x00040000
585 #define CONFIG_SYS_FPGA_UART0_FO                0x00020000
586 #define CONFIG_SYS_FPGA_UART1_FO                0x00010000
587
588 /* loopback */
589 #define CONFIG_SYS_FPGA_CHIPSIDE_LOOPBACK       0x00004000
590 #define CONFIG_SYS_FPGA_LINESIDE_LOOPBACK       0x00008000
591 #define CONFIG_SYS_FPGA_SLIC0_ENABLE            0x00002000
592 #define CONFIG_SYS_FPGA_SLIC1_ENABLE            0x00001000
593 #define CONFIG_SYS_FPGA_SLIC0_CS                0x00000800
594 #define CONFIG_SYS_FPGA_SLIC1_CS                0x00000400
595 #define CONFIG_SYS_FPGA_USER_LED0               0x00000200
596 #define CONFIG_SYS_FPGA_USER_LED1               0x00000100
597
598 #endif  /* __CONFIG_H */