include/configs/k2g_evm.h

   1 /*
   2  * Configuration header file for TI's k2g-evm
   3  *
   4  * (C) Copyright 2015
   5  *     Texas Instruments Incorporated, <www.ti.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_K2G_EVM_H
  11 #define __CONFIG_K2G_EVM_H
  12
  13 /* Platform type */
  14 #define CONFIG_SOC_K2G
  15 #define CONFIG_K2G_EVM
  16
  17 /* U-Boot general configuration */
  18 #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS                             \
  19         DEFAULT_MMC_TI_ARGS                                             \
  20         DEFAULT_PMMC_BOOT_ENV                                           \
  21         "boot=mmc\0"                                                    \
  22         "console=ttyS0,115200n8\0"                                      \
  23         "bootpart=0:2\0"                                                \
  24         "bootdir=/boot\0"                                               \
  25         "rd_spec=-\0"                                                   \
  26         "addr_mon=0x0c040000\0"                                         \
  27         "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "        \
  28         "root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0"       \
  29         "name_fdt=k2g-evm.dtb\0"                                \
  30         "name_mon=skern-k2g.bin\0"                                      \
  31         "name_ubi=k2g-evm-ubifs.ubi\0"                                  \
  32         "name_uboot=u-boot-spi-k2g-evm.gph\0"                           \
  33         "init_mmc=run args_all args_mmc\0"                              \
  34         "soc_variant=k2g\0"                                             \
  35         "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0"\
  36         "get_kern_mmc=load mmc ${bootpart} ${loadaddr} "                \
  37                 "${bootdir}/${name_kern}\0"                             \
  38         "get_mon_mmc=load mmc ${bootpart} ${addr_mon} ${bootdir}/${name_mon}\0"\
  39         "name_fs=arago-base-tisdk-image-k2g-evm.cpio\0"
  40
  41 #define CONFIG_BOOTCOMMAND                                              \
  42         "run envboot; "                                                 \
  43         "run set_name_pmmc init_${boot} get_pmmc_${boot} run_pmmc "     \
  44         "get_fdt_${boot} get_mon_${boot} get_kern_${boot} "             \
  45         "run_mon run_kern"
  46
  47 #include <configs/ti_armv7_keystone2.h>
  48
  49 /* SPL SPI Loader Configuration */
  50 #define CONFIG_SPL_TEXT_BASE            0x0c080000
  51
  52 /* NAND Configuration */
  53 #define CONFIG_SYS_NAND_PAGE_2K
  54
  55 /* Network */
  56 #define CONFIG_KSNET_NETCP_V1_5
  57 #define CONFIG_KSNET_CPSW_NUM_PORTS     2
  58 #define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
  59 #define CONFIG_PHY_MICREL
  60 #define PHY_ANEG_TIMEOUT        10000 /* PHY needs longer aneg time */
  61
  62 /* MMC/SD */
  63 #define CONFIG_MMC
  64 #define CONFIG_GENERIC_MMC
  65 #define CONFIG_OMAP_HSMMC
  66
  67 #undef CONFIG_ENV_IS_IN_NAND
  68 #define CONFIG_ENV_IS_IN_FAT
  69 #define FAT_ENV_INTERFACE               "mmc"
  70 #define FAT_ENV_DEVICE_AND_PART         "0:1"
  71 #define FAT_ENV_FILE                    "uboot.env"
  72
  73 #define CONFIG_SF_DEFAULT_BUS           1
  74 #define CONFIG_SF_DEFAULT_CS            0
  75
  76 #endif /* __CONFIG_K2G_EVM_H */