include/configs/ipek01.h

   1 /*
   2  * (C) Copyright 2006
   3  * MicroSys GmbH
   4  *
   5  * (C) Copyright 2009
   6  * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /*
  15  * High Level Configuration Options
  16  */
  17
  18 #define CONFIG_MPC5200
  19 #define CONFIG_MPX5200          1       /* MPX5200 board */
  20 #define CONFIG_MPC5200_DDR      1       /* use DDR RAM */
  21 #define CONFIG_IPEK01                   /* Motherboard is ipek01 */
  22
  23 #define CONFIG_SYS_TEXT_BASE    0xfc000000
  24
  25 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000 /* ... running at 33MHz */
  26
  27 #define CONFIG_MISC_INIT_R
  28
  29 #define CONFIG_SYS_CACHELINE_SIZE       32 /* For MPC5xxx CPUs */
  30 #ifdef CONFIG_CMD_KGDB
  31 #define CONFIG_SYS_CACHELINE_SHIFT      5  /* log base 2 of the above value */
  32 #endif
  33
  34 /*
  35  * Serial console configuration
  36  */
  37 #define CONFIG_PSC_CONSOLE      1       /* console is on PSC1 */
  38 #define CONFIG_BAUDRATE         115200  /* ... at 9600 bps */
  39 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
  40
  41 #define CONFIG_CMDLINE_EDITING  1       /* add command line history */
  42
  43 /*
  44  * Video configuration for LIME GDC
  45  */
  46 #ifdef CONFIG_VIDEO
  47 #define CONFIG_VIDEO_MB862xx
  48 #define CONFIG_VIDEO_MB862xx_ACCEL
  49 #define VIDEO_FB_16BPP_WORD_SWAP
  50 #define CONFIG_VIDEO_LOGO
  51 #define CONFIG_VIDEO_BMP_LOGO
  52 #define CONFIG_SPLASH_SCREEN
  53 #define CONFIG_VIDEO_BMP_GZIP
  54 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)       /* decompressed img */
  55 /* Lime clock frequency */
  56 #define CONFIG_SYS_MB862xx_CCF  0x90000 /* geo 166MHz other 133MHz */
  57 /* SDRAM parameter */
  58 #define CONFIG_SYS_MB862xx_MMR  0x41c767e3
  59 #endif
  60
  61 /*
  62  * PCI Mapping:
  63  * 0x40000000 - 0x4fffffff - PCI Memory
  64  * 0x50000000 - 0x50ffffff - PCI IO Space
  65  */
  66 #define CONFIG_PCI_PNP          1
  67 #define CONFIG_PCI_SCAN_SHOW    1
  68
  69 #define CONFIG_PCI_MEM_BUS      0x40000000
  70 #define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
  71 #define CONFIG_PCI_MEM_SIZE     0x10000000
  72
  73 #define CONFIG_PCI_IO_BUS       0x50000000
  74 #define CONFIG_PCI_IO_PHYS      CONFIG_PCI_IO_BUS
  75 #define CONFIG_PCI_IO_SIZE      0x01000000
  76
  77 #define CONFIG_MII              1
  78 #define CONFIG_EEPRO100         1
  79 #define CONFIG_SYS_RX_ETH_BUFFER        8  /* use 8 rx buffer on eepro100  */
  80
  81 /* Partitions */
  82 #define CONFIG_DOS_PARTITION
  83
  84 /* USB */
  85 #define CONFIG_USB_OHCI_NEW
  86 #define CONFIG_SYS_OHCI_BE_CONTROLLER
  87
  88 #define CONFIG_SYS_USB_OHCI_CPU_INIT
  89 #define CONFIG_SYS_USB_OHCI_REGS_BASE           MPC5XXX_USB
  90 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "mpc5200"
  91 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      15
  92
  93 /*
  94  * Command line configuration.
  95  */
  96 #ifdef CONFIG_VIDEO
  97 #define CONFIG_CMD_BMP          /* BMP support */
  98 #endif
  99 #define CONFIG_CMD_DATE         /* support for RTC, date/time...*/
 100 #define CONFIG_CMD_IDE          /* IDE harddisk support */
 101 #define CONFIG_CMD_IRQ          /* irqinfo */
 102 #define CONFIG_CMD_PCI          /* pciinfo */
 103
 104 #define CONFIG_SYS_LOWBOOT      1
 105
 106 /*
 107  * Autobooting
 108  */
 109
 110 #define CONFIG_PREBOOT  "echo;" \
 111         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 112         "echo"
 113
 114 #undef  CONFIG_BOOTARGS
 115
 116 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 117         "netdev=eth0\0"                                                 \
 118         "consoledev=ttyPSC0\0"                                          \
 119         "hostname=ipek01\0"                                             \
 120         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 121                 "nfsroot=${serverip}:${rootpath}\0"                     \
 122         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 123         "addip=setenv bootargs ${bootargs} "                            \
 124                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 125                 ":${hostname}:${netdev}:off panic=1\0"                  \
 126         "addtty=setenv bootargs ${bootargs} "                           \
 127                 "console=${consoledev},${baudrate}\0"                   \
 128         "flash_nfs=run nfsargs addip addtty;"                           \
 129                 "bootm ${kernel_addr} - ${fdtaddr}\0"                   \
 130         "flash_self=run ramargs addip addtty;"                          \
 131                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdtaddr}\0"     \
 132         "net_nfs=tftp 200000 ${bootfile}; tftp ${fdtaddr} ${fdtfile};"  \
 133                 "run nfsargs addip addtty;"                             \
 134                  "bootm ${loadaddr} - ${fdtaddr}\0"                     \
 135         "rootpath=/opt/eldk/ppc_6xx\0"                                  \
 136         "bootfile=ipek01/uImage\0"                                      \
 137         "load=tftp 100000 ipek01/u-boot.bin\0"                          \
 138         "update=protect off FC000000 +60000; era FC000000 +60000; "     \
 139                 "cp.b 100000 FC000000 ${filesize}\0"                    \
 140         "upd=run load;run update\0"                                     \
 141         "fdtaddr=800000\0"                                              \
 142         "loadaddr=400000\0"                                             \
 143         "fdtfile=ipek01/ipek01.dtb\0"                                   \
 144         ""
 145
 146 #define CONFIG_BOOTCOMMAND      "run flash_self"
 147
 148 /*
 149  * IPB Bus clocking configuration.
 150  */
 151 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK         /* for 133MHz */
 152 /* PCI clock must be 33, because board will not boot */
 153 #undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2     /* for 66MHz */
 154
 155 /*
 156  * Open firmware flat tree support
 157  */
 158 #define OF_CPU                  "PowerPC,5200@0"
 159 #define OF_SOC                  "soc5200@f0000000"
 160 #define OF_TBCLK                (bd->bi_busfreq / 4)
 161
 162 /*
 163  * I2C configuration
 164  */
 165 #define CONFIG_HARD_I2C         1       /* I2C with hardware support */
 166 #define CONFIG_SYS_I2C_MODULE   2       /* Select I2C module #1 or #2 */
 167
 168 #define CONFIG_SYS_I2C_SPEED    100000  /* 100 kHz */
 169 #define CONFIG_SYS_I2C_SLAVE    0x7F
 170
 171 /*
 172  * EEPROM configuration
 173  */
 174 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 175 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 176 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6
 177 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10
 178
 179 /*
 180  * RTC configuration
 181  */
 182 #define CONFIG_RTC_PCF8563
 183 #define CONFIG_SYS_I2C_RTC_ADDR         0x51
 184
 185 #define CONFIG_SYS_FLASH_BASE           0xFC000000
 186 #define CONFIG_SYS_FLASH_SIZE           0x01000000
 187 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + \
 188                                          CONFIG_SYS_MONITOR_LEN)
 189
 190 #define CONFIG_SYS_MAX_FLASH_BANKS      1    /* max num of memory banks */
 191 #define CONFIG_SYS_MAX_FLASH_SECT       256  /* max num of sects on one chip */
 192 #define CONFIG_SYS_FLASH_PROTECTION  /* "Real" (hardware) sectors protection */
 193
 194 /* use CFI flash driver */
 195 #define CONFIG_FLASH_CFI_DRIVER
 196 #define CONFIG_SYS_FLASH_CFI
 197 #define CONFIG_SYS_FLASH_EMPTY_INFO
 198 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
 199
 200 /*
 201  * Environment settings
 202  */
 203 #define CONFIG_ENV_IS_IN_FLASH          1
 204 #define CONFIG_ENV_SIZE                 0x10000
 205 #define CONFIG_ENV_SECT_SIZE            0x20000
 206 #define CONFIG_ENV_OVERWRITE            1
 207 #define CONFIG_ENV_ADDR_REDUND          (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 208 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 209
 210 /*
 211  * Memory map
 212  */
 213 #define CONFIG_SYS_MBAR                 0xf0000000
 214 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 215 #define CONFIG_SYS_DEFAULT_MBAR         0x80000000
 216 #define CONFIG_SYS_SRAM_BASE            0xF1000000
 217 #define CONFIG_SYS_SRAM_SIZE            0x00200000
 218 #define CONFIG_SYS_LIME_BASE            0xE4000000
 219 #define CONFIG_SYS_LIME_SIZE            0x04000000
 220 #define CONFIG_SYS_FPGA_BASE            0xC0000000
 221 #define CONFIG_SYS_FPGA_SIZE            0x10000000
 222 #define CONFIG_SYS_MPEG_BASE            0xe2000000
 223 #define CONFIG_SYS_MPEG_SIZE            0x01000000
 224 #define CONFIG_SYS_CF_BASE              0xe1000000
 225 #define CONFIG_SYS_CF_SIZE              0x01000000
 226
 227 /* Use SRAM until RAM will be available */
 228 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 229 /* End of used area in DPRAM */
 230 #define CONFIG_SYS_INIT_RAM_SIZE                MPC5XXX_SRAM_SIZE
 231
 232 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 233                                          GENERATED_GBL_DATA_SIZE)
 234 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 235
 236 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 237 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 238 #   define CONFIG_SYS_RAMBOOT           1
 239 #endif
 240
 241 #define CONFIG_SYS_MONITOR_LEN  (384 << 10)  /* Reserve 384 kB for Monitor */
 242 #define CONFIG_SYS_MALLOC_LEN   (4 << 20)    /* Reserve 128 kB for malloc() */
 243 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20)    /* Initial Memory map for Linux */
 244
 245 /*
 246  * Ethernet configuration
 247  */
 248 #define CONFIG_MPC5xxx_FEC              1
 249 #define CONFIG_MPC5xxx_FEC_MII100
 250 #define CONFIG_PHY_ADDR                 0x00
 251
 252 /*
 253  * GPIO configuration
 254  */
 255 #define CONFIG_SYS_GPS_PORT_CONFIG      0x1d556624
 256
 257 /*
 258  * Miscellaneous configurable options
 259  */
 260 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 261 #ifdef CONFIG_CMD_KGDB
 262 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 263 #else
 264 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 265 #endif
 266 /* Print Buffer Size */
 267 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 268                                          sizeof(CONFIG_SYS_PROMPT) + 16)
 269 /* max number of command args */
 270 #define CONFIG_SYS_MAXARGS              16
 271 /* Boot Argument Buffer Size */
 272 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 273
 274 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
 275 #define CONFIG_SYS_MEMTEST_END          0x00f00000      /* 1...15 MB in DRAM */
 276
 277 #define CONFIG_SYS_LOAD_ADDR            0x100000 /* default load address */
 278
 279 /*
 280  * Various low-level settings
 281  */
 282 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 283 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 284
 285 #define CONFIG_SYS_BOOTCS_START         CONFIG_SYS_FLASH_BASE
 286 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 287 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 288 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 289 #define CONFIG_SYS_CS1_START            CONFIG_SYS_SRAM_BASE
 290 #define CONFIG_SYS_CS1_SIZE             CONFIG_SYS_SRAM_SIZE
 291 #define CONFIG_SYS_CS3_START            CONFIG_SYS_LIME_BASE
 292 #define CONFIG_SYS_CS3_SIZE             CONFIG_SYS_LIME_SIZE
 293 #define CONFIG_SYS_CS6_START            CONFIG_SYS_FPGA_BASE
 294 #define CONFIG_SYS_CS6_SIZE             CONFIG_SYS_FPGA_SIZE
 295 #define CONFIG_SYS_CS5_START            CONFIG_SYS_CF_BASE
 296 #define CONFIG_SYS_CS5_SIZE             CONFIG_SYS_CF_SIZE
 297 #define CONFIG_SYS_CS7_START            CONFIG_SYS_MPEG_BASE
 298 #define CONFIG_SYS_CS7_SIZE             CONFIG_SYS_MPEG_SIZE
 299
 300 #ifdef CONFIG_SYS_PCISPEED_66
 301 #define CONFIG_SYS_BOOTCS_CFG           0x0006F900
 302 #define CONFIG_SYS_CS1_CFG              0x0004FB00
 303 #define CONFIG_SYS_CS2_CFG              0x0006F900
 304 #else
 305 #define CONFIG_SYS_BOOTCS_CFG           0x0002F900
 306 #define CONFIG_SYS_CS1_CFG              0x0001FB00
 307 #define CONFIG_SYS_CS2_CFG              0x0002F90C
 308 #endif
 309
 310 /*
 311  * Ack active, Muxed mode, AS=24 bit address, DS=32 bit data, 0
 312  * waitstates, writeswap and readswap enabled
 313  */
 314 #define CONFIG_SYS_CS3_CFG              0x00FFFB0C
 315 #define CONFIG_SYS_CS6_CFG              0x00FFFB0C
 316 #define CONFIG_SYS_CS7_CFG              0x4040751C
 317
 318 #define CONFIG_SYS_CS_BURST             0x00000000
 319 #define CONFIG_SYS_CS_DEADCYCLE         0x33330000
 320
 321 #define CONFIG_SYS_RESET_ADDRESS        0xff000000
 322
 323 /*-----------------------------------------------------------------------
 324  * USB stuff
 325  *-----------------------------------------------------------------------
 326  */
 327 #define CONFIG_USB_CLOCK                0x0001BBBB
 328 #define CONFIG_USB_CONFIG               0x00005000
 329
 330 /*-----------------------------------------------------------------------
 331  * IDE/ATA stuff Supports IDE harddisk
 332  *-----------------------------------------------------------------------
 333  */
 334 #define CONFIG_IDE_PREINIT
 335
 336 #define CONFIG_SYS_IDE_MAXBUS           1 /* max. 1 IDE bus */
 337 #define CONFIG_SYS_IDE_MAXDEVICE        2 /* max. 2 drives per IDE bus */
 338
 339 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 340
 341 #define CONFIG_SYS_ATA_BASE_ADDR        MPC5XXX_ATA
 342
 343 /* Offset for data I/O */
 344 #define CONFIG_SYS_ATA_DATA_OFFSET      (0x0060)
 345
 346 /* Offset for normal register accesses */
 347 #define CONFIG_SYS_ATA_REG_OFFSET       (CONFIG_SYS_ATA_DATA_OFFSET)
 348
 349 /* Offset for alternate registers */
 350 #define CONFIG_SYS_ATA_ALT_OFFSET       (0x005C)
 351
 352 /* Interval between registers */
 353 #define CONFIG_SYS_ATA_STRIDE           4
 354
 355 #endif /* __CONFIG_H */