include/configs/ipam390.h

   1 /*
   2  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   3  * Based on:
   4  * U-Boot:include/configs/da850evm.h
   5  *
   6  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
   7  *
   8  * Based on davinci_dvevm.h. Original Copyrights follow:
   9  *
  10  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #ifndef __CONFIG_H
  16 #define __CONFIG_H
  17
  18 /*
  19  * Board
  20  */
  21 #define CONFIG_DRIVER_TI_EMAC
  22 #define CONFIG_BARIX_IPAM390
  23
  24 /*
  25  * SoC Configuration
  26  */
  27 #define CONFIG_MACH_DAVINCI_DA850_EVM
  28 #define CONFIG_SOC_DA8XX                /* TI DA8xx SoC */
  29 #define CONFIG_SOC_DA850                /* TI DA850 SoC */
  30 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
  31 #define CONFIG_SYS_CLK_FREQ             clk_get(DAVINCI_ARM_CLKID)
  32 #define CONFIG_SYS_OSCIN_FREQ           24000000
  33 #define CONFIG_SYS_TIMERBASE            DAVINCI_TIMER0_BASE
  34 #define CONFIG_SYS_HZ_CLOCK             clk_get(DAVINCI_AUXCLK_CLKID)
  35 #define CONFIG_SYS_DA850_PLL_INIT
  36 #define CONFIG_SYS_DA850_DDR_INIT
  37 #define CONFIG_SYS_TEXT_BASE            0xc1080000
  38
  39 /*
  40  * Memory Info
  41  */
  42 #define CONFIG_SYS_MALLOC_LEN   (0x10000 + 1*1024*1024) /* malloc() len */
  43 #define PHYS_SDRAM_1            DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
  44 #define PHYS_SDRAM_1_SIZE       (128 << 20) /* SDRAM size 128MB */
  45 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
  46
  47 /* memtest start addr */
  48 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1 + 0x2000000)
  49
  50 /* memtest will be run on 16MB */
  51 #define CONFIG_SYS_MEMTEST_END  (CONFIG_SYS_MEMTEST_START + 16 * 1024 * 1024)
  52
  53 #define CONFIG_NR_DRAM_BANKS    1 /* we have 1 bank of DRAM */
  54
  55 #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (       \
  56         DAVINCI_SYSCFG_SUSPSRC_TIMER0 |         \
  57         DAVINCI_SYSCFG_SUSPSRC_UART2 |          \
  58         DAVINCI_SYSCFG_SUSPSRC_UART0 |          \
  59         DAVINCI_SYSCFG_SUSPSRC_EMAC)
  60
  61 /*
  62  * PLL configuration
  63  */
  64 #define CONFIG_SYS_DV_CLKMODE          0
  65 #define CONFIG_SYS_DA850_PLL0_POSTDIV  1
  66 #define CONFIG_SYS_DA850_PLL0_PLLDIV1  0x8000
  67 #define CONFIG_SYS_DA850_PLL0_PLLDIV2  0x8001
  68 #define CONFIG_SYS_DA850_PLL0_PLLDIV3  0x8002
  69 #define CONFIG_SYS_DA850_PLL0_PLLDIV4  0x8003
  70 #define CONFIG_SYS_DA850_PLL0_PLLDIV5  0x8002
  71 #define CONFIG_SYS_DA850_PLL0_PLLDIV6  CONFIG_SYS_DA850_PLL0_PLLDIV1
  72 #define CONFIG_SYS_DA850_PLL0_PLLDIV7  0x8005
  73
  74 #define CONFIG_SYS_DA850_PLL1_POSTDIV  1
  75 #define CONFIG_SYS_DA850_PLL1_PLLDIV1  0x8000
  76 #define CONFIG_SYS_DA850_PLL1_PLLDIV2  0x8001
  77 #define CONFIG_SYS_DA850_PLL1_PLLDIV3  0x8002
  78
  79 #define CONFIG_SYS_DA850_PLL0_PLLM     24
  80 #define CONFIG_SYS_DA850_PLL1_PLLM     24
  81
  82 /*
  83  * DDR2 memory configuration
  84  */
  85 #define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
  86                                         DV_DDR_PHY_EXT_STRBEN | \
  87                                         (0x2 << DV_DDR_PHY_RD_LATENCY_SHIFT))
  88 #define CONFIG_SYS_DA850_DDR2_SDRCR     0x00000498
  89
  90 #define CONFIG_SYS_DA850_DDR2_SDBCR2    0x00000004
  91 #define CONFIG_SYS_DA850_DDR2_PBBPR     0x00000020
  92
  93
  94 #define CONFIG_SYS_DA850_DDR2_SDTIMR (          \
  95         (13 << DV_DDR_SDTMR1_RFC_SHIFT) |       \
  96         (2 << DV_DDR_SDTMR1_RP_SHIFT) |         \
  97         (2 << DV_DDR_SDTMR1_RCD_SHIFT) |        \
  98         (2 << DV_DDR_SDTMR1_WR_SHIFT) |         \
  99         (5 << DV_DDR_SDTMR1_RAS_SHIFT) |        \
 100         (8 << DV_DDR_SDTMR1_RC_SHIFT) |         \
 101         (1 << DV_DDR_SDTMR1_RRD_SHIFT) |        \
 102         (1 << DV_DDR_SDTMR1_WTR_SHIFT))
 103
 104 #define CONFIG_SYS_DA850_DDR2_SDTIMR2 (         \
 105         (8 << DV_DDR_SDTMR2_RASMAX_SHIFT) |     \
 106         (2 << DV_DDR_SDTMR2_XP_SHIFT) |         \
 107         (0 << DV_DDR_SDTMR2_ODT_SHIFT) |        \
 108         (14 << DV_DDR_SDTMR2_XSNR_SHIFT) |      \
 109         (0xc7 << DV_DDR_SDTMR2_XSRD_SHIFT) |    \
 110         (1 << DV_DDR_SDTMR2_RTP_SHIFT) |        \
 111         (2 << DV_DDR_SDTMR2_CKE_SHIFT))
 112
 113 #define CONFIG_SYS_DA850_DDR2_SDBCR (           \
 114         (1 << DV_DDR_SDCR_DDR2EN_SHIFT) |       \
 115         (1 << DV_DDR_SDCR_DDRDRIVE0_SHIFT) |    \
 116         (1 << DV_DDR_SDCR_DDREN_SHIFT) |        \
 117         (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) |      \
 118         (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) |    \
 119         (2 << DV_DDR_SDCR_CL_SHIFT) |   \
 120         (3 << DV_DDR_SDCR_IBANK_SHIFT) |        \
 121         (2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
 122
 123 #define CONFIG_SYS_DA850_CS3CFG (DAVINCI_ABCR_WSETUP(1) | \
 124                                 DAVINCI_ABCR_WSTROBE(2) | \
 125                                 DAVINCI_ABCR_WHOLD(0)   | \
 126                                 DAVINCI_ABCR_RSETUP(1)  | \
 127                                 DAVINCI_ABCR_RSTROBE(2) | \
 128                                 DAVINCI_ABCR_RHOLD(1)   | \
 129                                 DAVINCI_ABCR_TA(0)      | \
 130                                 DAVINCI_ABCR_ASIZE_8BIT)
 131
 132
 133 /*
 134  * Serial Driver info
 135  */
 136 #define CONFIG_SYS_NS16550_SERIAL
 137 #define CONFIG_SYS_NS16550_REG_SIZE     -4      /* NS16550 register size */
 138 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */
 139 #define CONFIG_SYS_NS16550_CLK  clk_get(DAVINCI_UART2_CLKID)
 140 #define CONFIG_CONS_INDEX       1               /* use UART0 for console */
 141 #define CONFIG_BAUDRATE         115200          /* Default baud rate */
 142
 143 /*
 144  * Flash & Environment
 145  */
 146 #define CONFIG_NAND_DAVINCI
 147 #define CONFIG_SYS_NO_FLASH
 148 #define CONFIG_ENV_IS_IN_NAND           /* U-Boot env in NAND Flash  */
 149 #define CONFIG_ENV_OFFSET               0x0 /* Block 0--not used by bootcode */
 150 #define CONFIG_ENV_SIZE                 (128 << 10)
 151 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 152 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 153 #define CONFIG_SYS_NAND_PAGE_2K
 154 #define CONFIG_SYS_NAND_CS              3
 155 #define CONFIG_SYS_NAND_BASE            DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
 156 #define CONFIG_SYS_NAND_MASK_CLE                0x10
 157 #define CONFIG_SYS_NAND_MASK_ALE                0x8
 158 #undef CONFIG_SYS_NAND_HW_ECC
 159 #define CONFIG_SYS_MAX_NAND_DEVICE      1 /* Max number of NAND devices */
 160 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
 161 #define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
 162 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 163 #define CONFIG_SYS_NAND_PAGE_SIZE       (2 << 10)
 164 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 << 10)
 165 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
 166 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x120000
 167 #define CONFIG_SYS_NAND_U_BOOT_DST      0xc1080000
 168 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
 169 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \
 170                                         CONFIG_SYS_NAND_U_BOOT_SIZE - \
 171                                         CONFIG_SYS_MALLOC_LEN -       \
 172                                         GENERATED_GBL_DATA_SIZE)
 173 #define CONFIG_SYS_NAND_ECCPOS          {                               \
 174                         6,   7,  8,  9, 10,     11, 12, 13, 14, 15,     \
 175                         22, 23, 24, 25, 26,     27, 28, 29, 30, 31,     \
 176                         38, 39, 40, 41, 42,     43, 44, 45, 46, 47,     \
 177                         54, 55, 56, 57, 58,     59, 60, 61, 62, 63}
 178 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 179 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 180 #define CONFIG_SYS_NAND_ECCSIZE         512
 181 #define CONFIG_SYS_NAND_ECCBYTES        10
 182 #define CONFIG_SYS_NAND_OOBSIZE         64
 183 #define CONFIG_SPL_NAND_SUPPORT
 184 #define CONFIG_SPL_NAND_BASE
 185 #define CONFIG_SPL_NAND_DRIVERS
 186 #define CONFIG_SPL_NAND_ECC
 187 #define CONFIG_SPL_NAND_SIMPLE
 188 #define CONFIG_SPL_NAND_LOAD
 189
 190 /*
 191  * Network & Ethernet Configuration
 192  */
 193 #ifdef CONFIG_DRIVER_TI_EMAC
 194 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
 195 #define CONFIG_BOOTP_DEFAULT
 196 #define CONFIG_BOOTP_DNS
 197 #define CONFIG_BOOTP_DNS2
 198 #define CONFIG_BOOTP_SEND_HOSTNAME
 199 #define CONFIG_NET_RETRY_COUNT  10
 200 #endif
 201
 202 /*
 203  * U-Boot general configuration
 204  */
 205 #define CONFIG_MISC_INIT_R
 206 #define CONFIG_BOARD_EARLY_INIT_F
 207 #define CONFIG_BOOTFILE         "uImage" /* Boot file name */
 208 #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
 209 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 210 #define CONFIG_SYS_MAXARGS      16 /* max number of command args */
 211 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 212 #define CONFIG_SYS_LOAD_ADDR    (PHYS_SDRAM_1 + 0x700000)
 213 #define CONFIG_VERSION_VARIABLE
 214 #define CONFIG_AUTO_COMPLETE
 215 #define CONFIG_CMDLINE_EDITING
 216 #define CONFIG_SYS_LONGHELP
 217 #define CONFIG_CRC32_VERIFY
 218 #define CONFIG_MX_CYCLIC
 219
 220 /*
 221  * Linux Information
 222  */
 223 #define LINUX_BOOT_PARAM_ADDR   (PHYS_SDRAM_1 + 0x100)
 224 #define CONFIG_HWCONFIG         /* enable hwconfig */
 225 #define CONFIG_CMDLINE_TAG
 226 #define CONFIG_REVISION_TAG
 227 #define CONFIG_SETUP_MEMORY_TAGS
 228 #define CONFIG_BOOTDELAY        2
 229 #define CONFIG_EXTRA_ENV_SETTINGS \
 230         "defbootargs=setenv bootargs mem=128M console=ttyS0,115200n8 " \
 231                 "root=/dev/mtdblock5 rw noinitrd " \
 232                 "rootfstype=jffs2 noinitrd\0" \
 233         "hwconfig=dsp:wake=yes\0" \
 234         "bootcmd=nboot kernel;run defbootargs addmtd;bootm 0xc0700000\0" \
 235         "bootfile=uImage\0" \
 236         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"      \
 237         "mtddevname=uboot-env\0" \
 238         "mtddevnum=0\0" \
 239         "mtdids=" MTDIDS_DEFAULT "\0"                           \
 240         "mtdparts=" MTDPARTS_DEFAULT "\0"                       \
 241         "u-boot=/tftpboot/ipam390/u-boot.ais\0"                 \
 242         "upd_uboot=tftp c0000000 ${u-boot};nand erase.part u-boot;" \
 243                 "nand write c0000000 20000 ${filesize}\0"       \
 244         "setbootparms=nand read c0100000 200000 400000;"        \
 245                 "run defbootargs addmtd;"                       \
 246                 "spl export atags c0100000;"                    \
 247                 "nand erase.part bootparms;"                    \
 248                 "nand write c0000100 180000 20000\0"            \
 249         "\0"
 250
 251 /*
 252  * U-Boot commands
 253  */
 254 #define CONFIG_CMD_ENV
 255 #define CONFIG_CMD_ASKENV
 256 #define CONFIG_CMD_DHCP
 257 #define CONFIG_CMD_DIAG
 258 #define CONFIG_CMD_MII
 259 #define CONFIG_CMD_PING
 260 #define CONFIG_CMD_SAVES
 261
 262 #ifdef CONFIG_CMD_BDI
 263 #define CONFIG_CLOCKS
 264 #endif
 265
 266 #ifndef CONFIG_DRIVER_TI_EMAC
 267 #undef CONFIG_CMD_DHCP
 268 #undef CONFIG_CMD_MII
 269 #undef CONFIG_CMD_PING
 270 #endif
 271
 272 #define CONFIG_CMD_NAND
 273 #define CONFIG_CMD_NAND_TRIMFFS
 274
 275 #define CONFIG_CMD_MTDPARTS
 276 #define CONFIG_MTD_DEVICE
 277 #define CONFIG_MTD_PARTITIONS
 278 #define CONFIG_LZO
 279 #define CONFIG_RBTREE
 280 #define CONFIG_CMD_UBI
 281 #define CONFIG_CMD_UBIFS
 282
 283 #define MTDIDS_NAME_STR         "davinci_nand.0"
 284 #define MTDIDS_DEFAULT          "nand0=" MTDIDS_NAME_STR
 285 #define MTDPARTS_DEFAULT        "mtdparts=" MTDIDS_NAME_STR ":" \
 286                                         "128k(u-boot-env),"     \
 287                                         "1408k(u-boot),"        \
 288                                         "128k(bootparms),"      \
 289                                         "384k(factory-info),"   \
 290                                         "4M(kernel),"   \
 291                                         "-(rootfs)"
 292
 293 /* defines for SPL */
 294 #define CONFIG_SPL_FRAMEWORK
 295 #define CONFIG_SPL_BOARD_INIT
 296 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE - \
 297                                                 CONFIG_SYS_MALLOC_LEN)
 298 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
 299 #define CONFIG_SPL_SERIAL_SUPPORT
 300 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 301 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 302 #define CONFIG_SPL_LDSCRIPT     "board/$(BOARDDIR)/u-boot-spl-ipam390.lds"
 303 #define CONFIG_SPL_STACK        0x8001ff00
 304 #define CONFIG_SPL_TEXT_BASE    0x80000000
 305 #define CONFIG_SPL_MAX_SIZE     0x20000
 306 #define CONFIG_SPL_MAX_FOOTPRINT        32768
 307
 308 /* additions for new relocation code, must added to all boards */
 309 #define CONFIG_SYS_SDRAM_BASE           0xc0000000
 310
 311 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
 312                                         GENERATED_GBL_DATA_SIZE)
 313
 314 /* add FALCON boot mode */
 315 #define CONFIG_CMD_SPL
 316 #define CONFIG_SPL_OS_BOOT
 317 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000
 318 #define CONFIG_SYS_SPL_ARGS_ADDR        LINUX_BOOT_PARAM_ADDR
 319 #define CONFIG_CMD_SPL_NAND_OFS         0x00180000
 320 #define CONFIG_CMD_SPL_WRITE_SIZE       0x400
 321
 322 /* GPIO support */
 323 #define CONFIG_SPL_GPIO_SUPPORT
 324 #define CONFIG_DA8XX_GPIO
 325 #define CONFIG_IPAM390_GPIO_BOOTMODE    ((16 * 7) + 14)
 326
 327 #define CONFIG_SHOW_BOOT_PROGRESS
 328 #define CONFIG_IPAM390_GPIO_LED_RED     ((16 * 7) + 11)
 329 #define CONFIG_IPAM390_GPIO_LED_GREEN   ((16 * 7) + 12)
 330
 331 #endif /* __CONFIG_H */