3 * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
5 * Based on include/configs/canyonlands.h
7 * Stefan Roese, DENX Software Engineering, sr@denx.de.
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
26 * intip.h - configuration for CompactCenter aka intip (460EX) and DevCon-Center
32 * High Level Configuration Options
35 * This config file is used for CompactCenter(codename intip) and DevCon-Center
37 #define CONFIG_460EX 1 /* Specific PPC460EX */
38 #ifdef CONFIG_DEVCONCENTER
39 #define CONFIG_HOSTNAME devconcenter
40 #define CONFIG_IDENT_STRING " devconcenter 0.02"
42 #define CONFIG_HOSTNAME intip
43 #define CONFIG_IDENT_STRING " intip 0.02"
46 #define CONFIG_4xx 1 /* ... PPC4xx family */
49 * Include common defines/options for all AMCC eval boards
51 #include "amcc-common.h"
53 #define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */
55 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
56 #define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */
57 #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
58 #define CONFIG_BOARD_TYPES 1 /* support board types */
60 #define CFG_ALT_MEMTEST
63 * Base addresses -- Note these are effective addresses where the
64 * actual resources get mapped (not physical addresses)
66 #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped PCI memory */
67 #define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
68 #define CONFIG_SYS_PCI_TARGBASE CONFIG_SYS_PCI_MEMBASE
71 #ifdef CONFIG_DEVCONCENTER /* Devcon-Center has 128 MB of flash */
72 #define CONFIG_SYS_FLASH_BASE 0xF8000000 /* later mapped here */
73 #define CONFIG_SYS_FLASH_SIZE (128 << 20)
75 #define CONFIG_SYS_FLASH_BASE 0xFC000000 /* later mapped here */
76 #define CONFIG_SYS_FLASH_SIZE (64 << 20)
79 #define CONFIG_SYS_NVRAM_BASE 0xE0000000
80 #define CONFIG_SYS_UART_BASE 0xE0100000
81 #define CONFIG_SYS_IO_BASE 0xE0200000
83 #define CONFIG_SYS_BOOT_BASE_ADDR 0xFF000000 /* EBC Boot Space */
84 #define CONFIG_SYS_FLASH_BASE_PHYS_H 0x4
85 #ifdef CONFIG_DEVCONCENTER /* Devcon-Center has 128 MB of flash */
86 #define CONFIG_SYS_FLASH_BASE_PHYS_L 0xC8000000
88 #define CONFIG_SYS_FLASH_BASE_PHYS_L 0xCC000000
90 #define CONFIG_SYS_FLASH_BASE_PHYS \
91 (((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) \
92 | (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)
94 #define CONFIG_SYS_OCM_BASE 0xE3000000 /* OCM: 64k */
95 #define CONFIG_SYS_SRAM_BASE 0xE8000000 /* SRAM: 256k */
96 #define CONFIG_SYS_LOCAL_CONF_REGS 0xEF000000
98 #define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000 /* internal periph. */
100 #define CONFIG_SYS_AHB_BASE 0xE2000000 /* int. AHB periph. */
103 * Initial RAM & stack pointer (placed in OCM)
105 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */
106 #define CONFIG_SYS_INIT_RAM_END (4 << 10)
107 #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */
108 #define CONFIG_SYS_GBL_DATA_OFFSET \
109 (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
110 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
115 #undef CONFIG_UART1_CONSOLE /* define this if you want console on UART1 */
121 * Define here the location of the environment variables (FLASH).
123 #define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
124 #define CONFIG_SYS_NOR_CS 0 /* NOR chip connected to CSx */
129 #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
130 #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
131 #define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD reset cmd */
133 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
134 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
135 #ifdef CONFIG_DEVCONCENTER
136 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* max num of sectors per chip*/
138 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sectors per chip*/
141 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase/ms */
142 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */
144 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* buff'd writes (20x faster) */
145 #define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */
147 #ifdef CONFIG_ENV_IS_IN_FLASH
148 #define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector*/
149 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
150 #define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
152 /* Address and size of Redundant Environment Sector */
153 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
154 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
155 #endif /* CONFIG_ENV_IS_IN_FLASH */
161 #define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */
163 #define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */
164 #define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */
165 #undef CONFIG_PPC4xx_DDR_METHOD_A
167 /* DDR1/2 SDRAM Device Control Register Data Values */
169 #define CONFIG_SYS_SDRAM_R0BAS 0x0000f800
170 #define CONFIG_SYS_SDRAM_R1BAS 0x00000000
171 #define CONFIG_SYS_SDRAM_R2BAS 0x00000000
172 #define CONFIG_SYS_SDRAM_R3BAS 0x00000000
173 #define CONFIG_SYS_SDRAM_PLBADDULL 0x00000000
174 #define CONFIG_SYS_SDRAM_PLBADDUHB 0x00000008
175 #define CONFIG_SYS_SDRAM_CONF1LL 0x80001C80
176 #define CONFIG_SYS_SDRAM_CONF1HB 0x80001C80
177 #define CONFIG_SYS_SDRAM_CONFPATHB 0x10a68000
179 /* SDRAM Controller */
180 #define CONFIG_SYS_SDRAM0_MB0CF 0x00000201
181 #define CONFIG_SYS_SDRAM0_MB1CF 0x00000000
182 #define CONFIG_SYS_SDRAM0_MB2CF 0x00000000
183 #define CONFIG_SYS_SDRAM0_MB3CF 0x00000000
184 #define CONFIG_SYS_SDRAM0_MCOPT1 0x05122000
185 #define CONFIG_SYS_SDRAM0_MCOPT2 0x00000000
186 #define CONFIG_SYS_SDRAM0_MODT0 0x00000000
187 #define CONFIG_SYS_SDRAM0_MODT1 0x00000000
188 #define CONFIG_SYS_SDRAM0_MODT2 0x00000000
189 #define CONFIG_SYS_SDRAM0_MODT3 0x00000000
190 #define CONFIG_SYS_SDRAM0_CODT 0x00000020
191 #define CONFIG_SYS_SDRAM0_RTR 0x06180000
192 #define CONFIG_SYS_SDRAM0_INITPLR0 0xA8380000
193 #define CONFIG_SYS_SDRAM0_INITPLR1 0x81900400
194 #define CONFIG_SYS_SDRAM0_INITPLR2 0x81020000
195 #define CONFIG_SYS_SDRAM0_INITPLR3 0x81030000
196 #define CONFIG_SYS_SDRAM0_INITPLR4 0x81010000
197 #define CONFIG_SYS_SDRAM0_INITPLR5 0xE4000542
198 #define CONFIG_SYS_SDRAM0_INITPLR6 0x81900400
199 #define CONFIG_SYS_SDRAM0_INITPLR7 0x8A880000
200 #define CONFIG_SYS_SDRAM0_INITPLR8 0x8A880000
201 #define CONFIG_SYS_SDRAM0_INITPLR9 0x8A880000
202 #define CONFIG_SYS_SDRAM0_INITPLR10 0x8A880000
203 #define CONFIG_SYS_SDRAM0_INITPLR11 0x81000442
204 #define CONFIG_SYS_SDRAM0_INITPLR12 0x81010380
205 #define CONFIG_SYS_SDRAM0_INITPLR13 0x81010000
206 #define CONFIG_SYS_SDRAM0_INITPLR14 0x00000000
207 #define CONFIG_SYS_SDRAM0_INITPLR15 0x00000000
208 #define CONFIG_SYS_SDRAM0_RQDC 0x80000038
209 #define CONFIG_SYS_SDRAM0_RFDC 0x003F0000
210 #define CONFIG_SYS_SDRAM0_RDCC 0x80000000
211 #define CONFIG_SYS_SDRAM0_DLCR 0x00000000
212 #define CONFIG_SYS_SDRAM0_CLKTR 0x40000000
213 #define CONFIG_SYS_SDRAM0_WRDTR 0x84000800
214 #define CONFIG_SYS_SDRAM0_SDTR1 0x80201000
215 #define CONFIG_SYS_SDRAM0_SDTR2 0x32204232
216 #define CONFIG_SYS_SDRAM0_SDTR3 0x090B0D15
217 #define CONFIG_SYS_SDRAM0_MMODE 0x00000442
218 #define CONFIG_SYS_SDRAM0_MEMODE 0x00000000
220 #define CONFIG_SYS_MBYTES_SDRAM 256 /* 256MB */
225 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */
227 #define CONFIG_SYS_I2C_MULTI_EEPROMS
228 #define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
229 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
230 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
231 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
233 /* I2C bootstrap EEPROM */
234 #define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x54
235 #define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0
236 #define CONFIG_4xx_CONFIG_BLOCKSIZE 16
239 #define CONFIG_DTT_LM63 1 /* National LM63 */
240 #define CONFIG_DTT_SENSORS { 0 } /* Sensor addresses */
241 #define CONFIG_DTT_PWM_LOOKUPTABLE \
242 { { 40, 10 }, { 50, 20 }, { 60, 40 } }
243 #define CONFIG_DTT_TACH_LIMIT 0xa10
245 /* RTC configuration */
246 #define CONFIG_RTC_DS1337 1
247 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
252 #define CONFIG_IBM_EMAC4_V4 1
254 #define CONFIG_HAS_ETH0
255 #define CONFIG_HAS_ETH1
257 #define CONFIG_PHY_ADDR 2 /* PHY address, See schematics */
258 #define CONFIG_PHY1_ADDR 3
260 #define CONFIG_PHY_RESET 1 /* reset phy upon startup */
261 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
262 #define CONFIG_PHY_DYNAMIC_ANEG 1
267 #define CONFIG_USB_OHCI_NEW
268 #define CONFIG_USB_STORAGE
269 #undef CONFIG_SYS_OHCI_BE_CONTROLLER /* 460EX has little endian descriptors*/
270 #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS /* 460EX has little endian register */
271 #define CONFIG_SYS_OHCI_USE_NPS /* force NoPowerSwitching mode */
272 #define CONFIG_SYS_USB_OHCI_REGS_BASE (CONFIG_SYS_AHB_BASE | 0xd0000)
273 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "ppc440"
274 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
277 * Default environment variables
279 #define CONFIG_EXTRA_ENV_SETTINGS \
280 CONFIG_AMCC_DEF_ENV \
281 CONFIG_AMCC_DEF_ENV_POWERPC \
282 CONFIG_AMCC_DEF_ENV_NOR_UPD \
283 "kernel_addr=fc000000\0" \
284 "fdt_addr=fc1e0000\0" \
285 "ramdisk_addr=fc200000\0" \
286 "pciconfighost=1\0" \
287 "pcie_mode=RP:RP\0" \
291 * Commands additional to the ones defined in amcc-common.h
293 #define CONFIG_CMD_CHIP_CONFIG
294 #define CONFIG_CMD_DATE
295 #define CONFIG_CMD_DTT
296 #define CONFIG_CMD_EXT2
297 #define CONFIG_CMD_FAT
298 #define CONFIG_CMD_PCI
299 #define CONFIG_CMD_SDRAM
300 #define CONFIG_CMD_SNTP
301 #define CONFIG_CMD_USB
304 #define CONFIG_MAC_PARTITION
305 #define CONFIG_DOS_PARTITION
306 #define CONFIG_ISO_PARTITION
312 #define CONFIG_PCI /* include pci support */
313 #define CONFIG_PCI_PNP /* do pci plug-and-play */
314 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
315 #define CONFIG_PCI_CONFIG_HOST_BRIDGE
316 #define CONFIG_PCI_DISABLE_PCIE
318 /* Board-specific PCI */
319 #define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */
320 #undef CONFIG_SYS_PCI_MASTER_INIT
322 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
323 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
327 * External Bus Controller (EBC) Setup
331 * CompactCenter has 64MBytes of NOR FLASH (Spansion 29GL512), but the
332 * boot EBC mapping only supports a maximum of 16MBytes
333 * (4.ff00.0000 - 4.ffff.ffff).
334 * To solve this problem, the FLASH has to get remapped to another
335 * EBC address which accepts bigger regions:
337 * 0xfc00.0000 -> 4.cc00.0000
341 /* Memory Bank 0 (NOR-FLASH) initialization */
342 #define CONFIG_SYS_EBC_PB0AP 0x10055e00
343 #define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_BOOT_BASE_ADDR | 0x9a000)
345 /* Memory Bank 1 (NVRAM) initialization */
346 #define CONFIG_SYS_EBC_PB1AP 0x02815480
347 /* BAS=NVRAM,BS=1MB,BU=R/W,BW=8bit*/
348 #define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_NVRAM_BASE | 0x18000)
350 /* Memory Bank 2 (UART) initialization */
351 #define CONFIG_SYS_EBC_PB2AP 0x02815480
352 /* BAS=UART,BS=1MB,BU=R/W,BW=16bit*/
353 #define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_UART_BASE | 0x1A000)
355 /* Memory Bank 3 (IO) initialization */
356 #define CONFIG_SYS_EBC_PB3AP 0x02815480
357 /* BAS=IO,BS=1MB,BU=R/W,BW=16bit*/
358 #define CONFIG_SYS_EBC_PB3CR (CONFIG_SYS_IO_BASE | 0x1A000)
361 * PPC4xx GPIO Configuration
363 /* 460EX: Use USB configuration */
364 #define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
367 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 GMC1TxD(0) USB2HostD(0) */ \
368 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 GMC1TxD(1) USB2HostD(1) */ \
369 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 GMC1TxD(2) USB2HostD(2) */ \
370 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 GMC1TxD(3) USB2HostD(3) */ \
371 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 GMC1TxD(4) USB2HostD(4) */ \
372 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 GMC1TxD(5) USB2HostD(5) */ \
373 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 GMC1TxD(6) USB2HostD(6) */ \
374 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 GMC1TxD(7) USB2HostD(7) */ \
375 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 GMC1RxD(0) USB2OTGD(0) */ \
376 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 GMC1RxD(1) USB2OTGD(1) */ \
377 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2) USB2OTGD(2) */ \
378 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3) USB2OTGD(3) */ \
379 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4) USB2OTGD(4) */ \
380 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5) USB2OTGD(5) */ \
381 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6) USB2OTGD(6) */ \
382 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7) USB2OTGD(7) */ \
383 {GPIO0_BASE, GPIO_IN , GPIO_SEL, GPIO_OUT_0}, /* GPIO16 GMC1TxER USB2HostStop */ \
384 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD USB2HostNext */ \
385 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER USB2HostDir */ \
386 {GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO19 GMC1TxEN USB2OTGStop */ \
387 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS USB2OTGNext */ \
388 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV USB2OTGDir */ \
389 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY */ \
390 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN */ \
391 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN */ \
392 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE */ \
393 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE */ \
394 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0) */ \
395 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1) */ \
396 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2) */ \
397 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0 DMAReq2 IRQ(7)*/ \
398 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1 DMAAck2 IRQ(8)*/ \
402 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2 EOT2/TC2 IRQ(9)*/ \
403 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3 DMAReq3 IRQ(4)*/ \
404 {GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
405 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
406 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3 UART3_SIN*/ \
407 {GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EOT3/TC3 UART3_SOUT*/ \
408 {GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
409 {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \
410 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3) */ \
411 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1) */ \
412 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2) */ \
413 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3) DMAReq1 IRQ(10)*/ \
414 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4) DMAAck1 IRQ(11)*/ \
415 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5) EOT/TC1 IRQ(12)*/ \
416 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5) DMAReq0 IRQ(13)*/ \
417 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6) DMAAck0 IRQ(14)*/ \
418 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7) EOT/TC0 IRQ(15)*/ \
419 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \
420 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 USB_SERVICE_SUSPEND_N */ \
421 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO51 SPI_CSS_N */ \
422 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO52 FPGA_PROGRAM_UC_N */ \
423 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 FPGA_INIT_UC_N */ \
424 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO54 WD_STROBE */ \
425 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 LED_2_OUT */ \
426 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO56 LED_1_OUT */ \
427 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \
428 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \
429 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \
430 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \
431 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO61 STARTUP_FINISHED_N */ \
432 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO62 STARTUP_FINISHED */ \
433 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 SERVICE_PORT_ACTIVE */ \
437 #endif /* __CONFIG_H */