4 * Kshitij Gupta <kshitij@ti.com>
5 * Configuation settings for the TI OMAP Innovator board.
9 * Philippe Robin, <philippe.robin@arm.com>
10 * Configuration for Compact Integrator board.
12 * SPDX-License-Identifier: GPL-2.0+
18 #include "integrator-common.h"
20 /* Integrator CP-specific configuration */
21 #define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */
26 #define CONFIG_SMC91111
27 #define CONFIG_SMC_USE_32_BIT
28 #define CONFIG_SMC91111_BASE 0xC8000000
29 #undef CONFIG_SMC91111_EXT_PHY
32 * Command line configuration.
34 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
35 #define CONFIG_BOOTCOMMAND "tftpboot ; bootm"
36 #define CONFIG_SERVERIP 192.168.1.100
37 #define CONFIG_IPADDR 192.168.1.104
38 #define CONFIG_BOOTFILE "uImage"
41 * Miscellaneous configurable options
43 #define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
44 #define CONFIG_SYS_MAX_FLASH_SECT 64
45 #define CONFIG_SYS_MONITOR_LEN 0x00100000
48 * Move up the U-Boot & monitor area if more flash is fitted.
49 * If this U-Boot is to be run on Integrators with varying flash sizes,
50 * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
51 * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE
52 * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not
53 * embedded in the boot monitor(s) area
55 #if ( PHYS_FLASH_SIZE == 0x04000000 )
57 #define CONFIG_ENV_ADDR 0x27F00000
58 #define CONFIG_SYS_MONITOR_BASE 0x27F40000
60 #elif (PHYS_FLASH_SIZE == 0x02000000 )
62 #define CONFIG_ENV_ADDR 0x25F00000
63 #define CONFIG_SYS_MONITOR_BASE 0x25F40000
67 #define CONFIG_ENV_ADDR 0x24F00000
68 #define CONFIG_SYS_MONITOR_BASE 0x27F40000
72 #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */
73 #define CONFIG_ENV_SIZE 8192 /* 8KB */
75 #endif /* __CONFIG_H */