include/configs/imx8qxp_mek.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2018 NXP
   4  */
   5
   6 #ifndef __IMX8QXP_MEK_H
   7 #define __IMX8QXP_MEK_H
   8
   9 #include <linux/sizes.h>
  10 #include <asm/arch/imx-regs.h>
  11
  12 #ifdef CONFIG_SPL_BUILD
  13 #define CONFIG_SPL_MAX_SIZE                             (124 * 1024)
  14 #define CONFIG_SYS_MONITOR_LEN                          (1024 * 1024)
  15 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
  16 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR         0x800
  17 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION              0
  18
  19 #define CONFIG_SPL_LDSCRIPT             "arch/arm/cpu/armv8/u-boot-spl.lds"
  20 #define CONFIG_SPL_STACK                0x013E000
  21 #define CONFIG_SPL_BSS_START_ADDR       0x00128000
  22 #define CONFIG_SPL_BSS_MAX_SIZE         0x1000  /* 4 KB */
  23 #define CONFIG_SYS_SPL_MALLOC_START     0x00120000
  24 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x3000  /* 12 KB */
  25 #define CONFIG_SERIAL_LPUART_BASE       0x5a060000
  26 #define CONFIG_MALLOC_F_ADDR            0x00120000
  27
  28 #define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
  29
  30 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
  31
  32 #define CONFIG_OF_EMBED
  33 #endif
  34
  35 #define CONFIG_REMAKE_ELF
  36
  37 #define CONFIG_BOARD_EARLY_INIT_F
  38
  39 /* Flat Device Tree Definitions */
  40 #define CONFIG_OF_BOARD_SETUP
  41
  42 #undef CONFIG_CMD_EXPORTENV
  43 #undef CONFIG_CMD_IMPORTENV
  44 #undef CONFIG_CMD_IMLS
  45
  46 #undef CONFIG_CMD_CRC32
  47
  48 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  49 #define USDHC1_BASE_ADDR                0x5B010000
  50 #define USDHC2_BASE_ADDR                0x5B020000
  51
  52 #define CONFIG_ENV_OVERWRITE
  53
  54 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  55
  56 #ifdef CONFIG_AHAB_BOOT
  57 #define AHAB_ENV "sec_boot=yes\0"
  58 #else
  59 #define AHAB_ENV "sec_boot=no\0"
  60 #endif
  61
  62 /* Initial environment variables */
  63 #define CONFIG_EXTRA_ENV_SETTINGS               \
  64         AHAB_ENV \
  65         "script=boot.scr\0" \
  66         "image=Image\0" \
  67         "panel=NULL\0" \
  68         "console=ttyLP0,${baudrate} earlycon\0" \
  69         "fdt_addr=0x83000000\0"                 \
  70         "fdt_high=0xffffffffffffffff\0"         \
  71         "boot_fdt=try\0" \
  72         "fdt_file=imx8qxp-mek.dtb\0" \
  73         "initrd_addr=0x83800000\0"              \
  74         "initrd_high=0xffffffffffffffff\0" \
  75         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  76         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  77         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  78         "mmcautodetect=yes\0" \
  79         "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
  80         "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  81         "bootscript=echo Running bootscript from mmc ...; " \
  82                 "source\0" \
  83         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  84         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  85         "loadcntr=fatload mmc ${mmcdev}:${mmcpart} ${cntr_addr} ${cntr_file}\0" \
  86         "auth_os=auth_cntr ${cntr_addr}\0" \
  87         "boot_os=booti ${loadaddr} - ${fdt_addr};\0" \
  88         "mmcboot=echo Booting from mmc ...; " \
  89                 "run mmcargs; " \
  90                 "if test ${sec_boot} = yes; then " \
  91                         "if run auth_os; then " \
  92                                 "run boot_os; " \
  93                         "else " \
  94                                 "echo ERR: failed to authenticate; " \
  95                         "fi; " \
  96                 "else " \
  97                         "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  98                                 "if run loadfdt; then " \
  99                                         "run boot_os; " \
 100                                 "else " \
 101                                         "echo WARN: Cannot load the DT; " \
 102                                 "fi; " \
 103                         "else " \
 104                                 "echo wait for boot; " \
 105                         "fi;" \
 106                 "fi;\0" \
 107         "netargs=setenv bootargs console=${console} " \
 108                 "root=/dev/nfs " \
 109                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 110         "netboot=echo Booting from net ...; " \
 111                 "run netargs;  " \
 112                 "if test ${ip_dyn} = yes; then " \
 113                         "setenv get_cmd dhcp; " \
 114                 "else " \
 115                         "setenv get_cmd tftp; " \
 116                 "fi; " \
 117                 "if test ${sec_boot} = yes; then " \
 118                         "${get_cmd} ${cntr_addr} ${cntr_file}; " \
 119                         "if run auth_os; then " \
 120                                 "run boot_os; " \
 121                         "else " \
 122                                 "echo ERR: failed to authenticate; " \
 123                         "fi; " \
 124                 "else " \
 125                         "${get_cmd} ${loadaddr} ${image}; " \
 126                         "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 127                                 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 128                                         "run boot_os; " \
 129                                 "else " \
 130                                         "echo WARN: Cannot load the DT; " \
 131                                 "fi; " \
 132                         "else " \
 133                                 "booti; " \
 134                         "fi;" \
 135                 "fi;\0"
 136
 137 #define CONFIG_BOOTCOMMAND \
 138            "mmc dev ${mmcdev}; if mmc rescan; then " \
 139                    "if run loadbootscript; then " \
 140                            "run bootscript; " \
 141                    "else " \
 142                            "if test ${sec_boot} = yes; then " \
 143                                    "if run loadcntr; then " \
 144                                            "run mmcboot; " \
 145                                    "else run netboot; " \
 146                                    "fi; " \
 147                             "else " \
 148                                    "if run loadimage; then " \
 149                                            "run mmcboot; " \
 150                                    "else run netboot; " \
 151                                    "fi; " \
 152                          "fi; " \
 153                    "fi; " \
 154            "else booti ${loadaddr} - ${fdt_addr}; fi"
 155
 156 /* Link Definitions */
 157 #define CONFIG_LOADADDR                 0x80280000
 158
 159 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 160
 161 #define CONFIG_SYS_INIT_SP_ADDR         0x80200000
 162
 163 /* Default environment is in SD */
 164 #define CONFIG_ENV_SIZE                 0x1000
 165 #define CONFIG_ENV_OFFSET               (64 * SZ_64K)
 166 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 167
 168 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
 169
 170 /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */
 171 #define CONFIG_SYS_MMC_ENV_DEV          1   /* USDHC2 */
 172 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"  /* USDHC2 */
 173 #define CONFIG_SYS_FSL_USDHC_NUM        2
 174
 175 /* Size of malloc() pool */
 176 #define CONFIG_SYS_MALLOC_LEN           ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
 177
 178 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 179 #define PHYS_SDRAM_1                    0x80000000
 180 #define PHYS_SDRAM_2                    0x880000000
 181 #define PHYS_SDRAM_1_SIZE               0x80000000      /* 2 GB */
 182 /* LPDDR4 board total DDR is 3GB */
 183 #define PHYS_SDRAM_2_SIZE               0x40000000      /* 1 GB */
 184
 185 /* Serial */
 186 #define CONFIG_BAUDRATE                 115200
 187
 188 /* Generic Timer Definitions */
 189 #define COUNTER_FREQUENCY               8000000 /* 8MHz */
 190
 191 #ifndef CONFIG_DM_PCA953X
 192 #define CONFIG_PCA953X
 193 #define CONFIG_CMD_PCA953X
 194 #define CONFIG_CMD_PCA953X_INFO
 195 #endif
 196
 197 /* Networking */
 198 #define CONFIG_FEC_XCV_TYPE             RGMII
 199 #define FEC_QUIRK_ENET_MAC
 200
 201 #endif /* __IMX8QXP_MEK_H */