Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig
[platform/kernel/u-boot.git] / include / configs / imx8mq_phanbell.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2020 NXP
4  */
5
6 #ifndef __IMX8M_PHANBELL_H
7 #define __IMX8M_PHANBELL_H
8
9 #include <linux/sizes.h>
10 #include <asm/arch/imx-regs.h>
11
12 #define CONFIG_SPL_MAX_SIZE             (172 * 1024)
13 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
14 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
15 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
16
17 #ifdef CONFIG_SPL_BUILD
18 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
19 #define CONFIG_SPL_WATCHDOG
20 #define CONFIG_SPL_DRIVERS_MISC
21 #define CONFIG_SPL_POWER
22 #define CONFIG_SPL_I2C
23 #define CONFIG_SPL_LDSCRIPT             "arch/arm/cpu/armv8/u-boot-spl.lds"
24 #define CONFIG_SPL_STACK                0x187FF0
25 #define CONFIG_SPL_LIBCOMMON_SUPPORT
26 #define CONFIG_SPL_LIBGENERIC_SUPPORT
27 #define CONFIG_SPL_GPIO
28 #define CONFIG_SPL_MMC
29 #define CONFIG_SPL_BSS_START_ADDR      0x00180000
30 #define CONFIG_SPL_BSS_MAX_SIZE        0x2000   /* 8 KB */
31 #define CONFIG_SYS_SPL_MALLOC_START    0x42200000
32 #define CONFIG_SYS_SPL_MALLOC_SIZE    0x80000   /* 512 KB */
33 #define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
34
35 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
36 #define CONFIG_MALLOC_F_ADDR            0x182000
37 /* For RAW image gives a error info not panic */
38 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
39
40 #undef CONFIG_DM_MMC
41 #endif
42
43 #define CONFIG_REMAKE_ELF
44
45 /* ENET Config */
46 /* ENET1 */
47 #if defined(CONFIG_CMD_NET)
48 #define CONFIG_MII
49 #define CONFIG_ETHPRIME                 "FEC"
50
51 #define CONFIG_FEC_MXC
52 #define CONFIG_FEC_XCV_TYPE             RGMII
53 #define CONFIG_FEC_MXC_PHYADDR          0
54 #define FEC_QUIRK_ENET_MAC
55
56 #define CONFIG_PHY_GIGE
57 #define IMX_FEC_BASE                    0x30BE0000
58
59 #define CONFIG_PHYLIB
60 #endif
61
62 #define CONFIG_MFG_ENV_SETTINGS \
63         "initrd_addr=0x43800000\0" \
64         "initrd_high=0xffffffff\0" \
65
66 /* Initial environment variables */
67 #define CONFIG_EXTRA_ENV_SETTINGS               \
68         CONFIG_MFG_ENV_SETTINGS \
69         "script=boot.scr\0" \
70         "image=Image\0" \
71         "console=ttymxc0,115200\0" \
72         "fdt_addr=0x43000000\0"                 \
73         "fdt_high=0xffffffffffffffff\0"         \
74         "boot_fdt=try\0" \
75         "fdt_file=imx8mq-phanbell.dtb\0" \
76         "initrd_addr=0x43800000\0"              \
77         "initrd_high=0xffffffffffffffff\0" \
78         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
79         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
80         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
81         "mmcautodetect=yes\0" \
82         "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
83         "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
84         "bootscript=echo Running bootscript from mmc ...; " \
85                 "source\0" \
86         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
87         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
88         "mmcboot=echo Booting from mmc ...; " \
89                 "run mmcargs; " \
90                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
91                         "if run loadfdt; then " \
92                                 "booti ${loadaddr} - ${fdt_addr}; " \
93                         "else " \
94                                 "echo WARN: Cannot load the DT; " \
95                         "fi; " \
96                 "else " \
97                         "echo wait for boot; " \
98                 "fi;\0" \
99         "netargs=setenv bootargs console=${console} " \
100                 "root=/dev/nfs " \
101                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
102         "netboot=echo Booting from net ...; " \
103                 "run netargs;  " \
104                 "if test ${ip_dyn} = yes; then " \
105                         "setenv get_cmd dhcp; " \
106                 "else " \
107                         "setenv get_cmd tftp; " \
108                 "fi; " \
109                 "${get_cmd} ${loadaddr} ${image}; " \
110                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
111                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
112                                 "booti ${loadaddr} - ${fdt_addr}; " \
113                         "else " \
114                                 "echo WARN: Cannot load the DT; " \
115                         "fi; " \
116                 "else " \
117                         "booti; " \
118                 "fi;\0"
119
120 #define CONFIG_BOOTCOMMAND \
121            "mmc dev ${mmcdev}; if mmc rescan; then " \
122                    "if run loadbootscript; then " \
123                            "run bootscript; " \
124                    "else " \
125                            "if run loadimage; then " \
126                                    "run mmcboot; " \
127                            "else run netboot; " \
128                            "fi; " \
129                    "fi; " \
130            "else booti ${loadaddr} - ${fdt_addr}; fi"
131
132 /* Link Definitions */
133
134 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
135 #define CONFIG_SYS_INIT_RAM_SIZE        0x80000
136 #define CONFIG_SYS_INIT_SP_OFFSET \
137         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
138 #define CONFIG_SYS_INIT_SP_ADDR \
139         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
140
141 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"  /* USDHC2 */
142
143 #define CONFIG_SYS_SDRAM_BASE           0x40000000
144 #define PHYS_SDRAM                      0x40000000
145 #define PHYS_SDRAM_SIZE                 0x40000000 /* 1GB DDR */
146
147 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM
148 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + \
149                                         (PHYS_SDRAM_SIZE >> 1))
150
151 #define CONFIG_MXC_UART_BASE            UART1_BASE_ADDR
152
153 /* Monitor Command Prompt */
154 #define CONFIG_SYS_CBSIZE               1024
155 #define CONFIG_SYS_MAXARGS              64
156 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
157 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
158                                         sizeof(CONFIG_SYS_PROMPT) + 16)
159
160 #define CONFIG_IMX_BOOTAUX
161
162 #define CONFIG_SYS_FSL_USDHC_NUM        2
163 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
164
165 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
166
167 #define CONFIG_MXC_GPIO
168
169 #define CONFIG_OF_SYSTEM_SETUP
170
171 #endif