1 /* SPDX-License-Identifier: GPL-2.0+ */
6 #ifndef __IMX8M_PHANBELL_H
7 #define __IMX8M_PHANBELL_H
9 #include <linux/sizes.h>
10 #include <asm/arch/imx-regs.h>
12 #define CONFIG_SPL_MAX_SIZE (172 * 1024)
13 #define CONFIG_SYS_MONITOR_LEN (512 * 1024)
14 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
15 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
17 #ifdef CONFIG_SPL_BUILD
18 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
19 #define CONFIG_SPL_WATCHDOG_SUPPORT
20 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
21 #define CONFIG_SPL_POWER
22 #define CONFIG_SPL_I2C_SUPPORT
23 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
24 #define CONFIG_SPL_STACK 0x187FF0
25 #define CONFIG_SPL_LIBCOMMON_SUPPORT
26 #define CONFIG_SPL_LIBGENERIC_SUPPORT
27 #define CONFIG_SPL_GPIO_SUPPORT
28 #define CONFIG_SPL_MMC_SUPPORT
29 #define CONFIG_SPL_BSS_START_ADDR 0x00180000
30 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */
31 #define CONFIG_SYS_SPL_MALLOC_START 0x42200000
32 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */
33 #define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000
35 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
36 #define CONFIG_MALLOC_F_ADDR 0x182000
37 /* For RAW image gives a error info not panic */
38 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
42 #undef CONFIG_DM_PMIC_PFUZE100
44 #define CONFIG_SYS_I2C
45 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
46 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
47 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
49 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
52 #define CONFIG_POWER_I2C
55 #define CONFIG_REMAKE_ELF
59 #if defined(CONFIG_CMD_NET)
61 #define CONFIG_ETHPRIME "FEC"
63 #define CONFIG_FEC_MXC
64 #define CONFIG_FEC_XCV_TYPE RGMII
65 #define CONFIG_FEC_MXC_PHYADDR 0
66 #define FEC_QUIRK_ENET_MAC
68 #define CONFIG_PHY_GIGE
69 #define IMX_FEC_BASE 0x30BE0000
74 #define CONFIG_MFG_ENV_SETTINGS \
75 "initrd_addr=0x43800000\0" \
76 "initrd_high=0xffffffff\0" \
78 /* Initial environment variables */
79 #define CONFIG_EXTRA_ENV_SETTINGS \
80 CONFIG_MFG_ENV_SETTINGS \
83 "console=ttymxc0,115200\0" \
84 "fdt_addr=0x43000000\0" \
85 "fdt_high=0xffffffffffffffff\0" \
87 "fdt_file=imx8mq-phanbell.dtb\0" \
88 "initrd_addr=0x43800000\0" \
89 "initrd_high=0xffffffffffffffff\0" \
90 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
91 "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
92 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
93 "mmcautodetect=yes\0" \
94 "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
95 "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
96 "bootscript=echo Running bootscript from mmc ...; " \
98 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
99 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
100 "mmcboot=echo Booting from mmc ...; " \
102 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
103 "if run loadfdt; then " \
104 "booti ${loadaddr} - ${fdt_addr}; " \
106 "echo WARN: Cannot load the DT; " \
109 "echo wait for boot; " \
111 "netargs=setenv bootargs console=${console} " \
113 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
114 "netboot=echo Booting from net ...; " \
116 "if test ${ip_dyn} = yes; then " \
117 "setenv get_cmd dhcp; " \
119 "setenv get_cmd tftp; " \
121 "${get_cmd} ${loadaddr} ${image}; " \
122 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
123 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
124 "booti ${loadaddr} - ${fdt_addr}; " \
126 "echo WARN: Cannot load the DT; " \
132 #define CONFIG_BOOTCOMMAND \
133 "mmc dev ${mmcdev}; if mmc rescan; then " \
134 "if run loadbootscript; then " \
137 "if run loadimage; then " \
139 "else run netboot; " \
142 "else booti ${loadaddr} - ${fdt_addr}; fi"
144 /* Link Definitions */
145 #define CONFIG_LOADADDR 0x40480000
147 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
149 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
150 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000
151 #define CONFIG_SYS_INIT_SP_OFFSET \
152 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
153 #define CONFIG_SYS_INIT_SP_ADDR \
154 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
156 #define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
158 /* Size of malloc() pool */
159 #define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (2 * 1024)) * 1024)
161 #define CONFIG_SYS_SDRAM_BASE 0x40000000
162 #define PHYS_SDRAM 0x40000000
163 #define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */
165 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
166 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
167 (PHYS_SDRAM_SIZE >> 1))
169 #define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
171 /* Monitor Command Prompt */
172 #define CONFIG_SYS_CBSIZE 1024
173 #define CONFIG_SYS_MAXARGS 64
174 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
175 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
176 sizeof(CONFIG_SYS_PROMPT) + 16)
178 #define CONFIG_IMX_BOOTAUX
180 #define CONFIG_SYS_FSL_USDHC_NUM 2
181 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
183 #define CONFIG_SYS_MMC_IMG_LOAD_PART 1
185 #define CONFIG_MXC_GPIO
188 #define CONFIG_SYS_I2C_SPEED 100000
190 #define CONFIG_OF_SYSTEM_SETUP
192 #ifndef CONFIG_SPL_BUILD
193 #define CONFIG_DM_PMIC