include/configs/imx8mq_phanbell.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2020 NXP
   4  */
   5
   6 #ifndef __IMX8M_PHANBELL_H
   7 #define __IMX8M_PHANBELL_H
   8
   9 #include <linux/sizes.h>
  10 #include <asm/arch/imx-regs.h>
  11
  12 #define CONFIG_SPL_MAX_SIZE             (172 * 1024)
  13 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
  14 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
  15 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
  16
  17 #ifdef CONFIG_SPL_BUILD
  18 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
  19 #define CONFIG_SPL_STACK                0x187FF0
  20 #define CONFIG_SPL_BSS_START_ADDR      0x00180000
  21 #define CONFIG_SPL_BSS_MAX_SIZE        0x2000   /* 8 KB */
  22 #define CONFIG_SYS_SPL_MALLOC_START    0x42200000
  23 #define CONFIG_SYS_SPL_MALLOC_SIZE    0x80000   /* 512 KB */
  24 #define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
  25
  26 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
  27 #define CONFIG_MALLOC_F_ADDR            0x182000
  28 /* For RAW image gives a error info not panic */
  29 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
  30
  31 #undef CONFIG_DM_MMC
  32 #endif
  33
  34 #define CONFIG_REMAKE_ELF
  35
  36 /* ENET Config */
  37 /* ENET1 */
  38 #if defined(CONFIG_CMD_NET)
  39 #define CONFIG_MII
  40 #define CONFIG_ETHPRIME                 "FEC"
  41
  42 #define CONFIG_FEC_XCV_TYPE             RGMII
  43 #define CONFIG_FEC_MXC_PHYADDR          0
  44 #define FEC_QUIRK_ENET_MAC
  45
  46 #define CONFIG_PHY_GIGE
  47 #define IMX_FEC_BASE                    0x30BE0000
  48
  49 #define CONFIG_PHYLIB
  50 #endif
  51
  52 #define CONFIG_MFG_ENV_SETTINGS \
  53         "initrd_addr=0x43800000\0" \
  54         "initrd_high=0xffffffff\0" \
  55
  56 /* Initial environment variables */
  57 #define CONFIG_EXTRA_ENV_SETTINGS               \
  58         CONFIG_MFG_ENV_SETTINGS \
  59         "script=boot.scr\0" \
  60         "image=Image\0" \
  61         "console=ttymxc0,115200\0" \
  62         "fdt_addr=0x43000000\0"                 \
  63         "fdt_high=0xffffffffffffffff\0"         \
  64         "boot_fdt=try\0" \
  65         "fdt_file=imx8mq-phanbell.dtb\0" \
  66         "initrd_addr=0x43800000\0"              \
  67         "initrd_high=0xffffffffffffffff\0" \
  68         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  69         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  70         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  71         "mmcautodetect=yes\0" \
  72         "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
  73         "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  74         "bootscript=echo Running bootscript from mmc ...; " \
  75                 "source\0" \
  76         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  77         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  78         "mmcboot=echo Booting from mmc ...; " \
  79                 "run mmcargs; " \
  80                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  81                         "if run loadfdt; then " \
  82                                 "booti ${loadaddr} - ${fdt_addr}; " \
  83                         "else " \
  84                                 "echo WARN: Cannot load the DT; " \
  85                         "fi; " \
  86                 "else " \
  87                         "echo wait for boot; " \
  88                 "fi;\0" \
  89         "netargs=setenv bootargs console=${console} " \
  90                 "root=/dev/nfs " \
  91                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  92         "netboot=echo Booting from net ...; " \
  93                 "run netargs;  " \
  94                 "if test ${ip_dyn} = yes; then " \
  95                         "setenv get_cmd dhcp; " \
  96                 "else " \
  97                         "setenv get_cmd tftp; " \
  98                 "fi; " \
  99                 "${get_cmd} ${loadaddr} ${image}; " \
 100                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 101                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 102                                 "booti ${loadaddr} - ${fdt_addr}; " \
 103                         "else " \
 104                                 "echo WARN: Cannot load the DT; " \
 105                         "fi; " \
 106                 "else " \
 107                         "booti; " \
 108                 "fi;\0"
 109
 110 #define CONFIG_BOOTCOMMAND \
 111            "mmc dev ${mmcdev}; if mmc rescan; then " \
 112                    "if run loadbootscript; then " \
 113                            "run bootscript; " \
 114                    "else " \
 115                            "if run loadimage; then " \
 116                                    "run mmcboot; " \
 117                            "else run netboot; " \
 118                            "fi; " \
 119                    "fi; " \
 120            "else booti ${loadaddr} - ${fdt_addr}; fi"
 121
 122 /* Link Definitions */
 123
 124 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 125 #define CONFIG_SYS_INIT_RAM_SIZE        0x80000
 126 #define CONFIG_SYS_INIT_SP_OFFSET \
 127         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 128 #define CONFIG_SYS_INIT_SP_ADDR \
 129         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 130
 131 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"  /* USDHC2 */
 132
 133 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 134 #define PHYS_SDRAM                      0x40000000
 135 #define PHYS_SDRAM_SIZE                 0x40000000 /* 1GB DDR */
 136
 137 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM
 138 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + \
 139                                         (PHYS_SDRAM_SIZE >> 1))
 140
 141 #define CONFIG_MXC_UART_BASE            UART1_BASE_ADDR
 142
 143 /* Monitor Command Prompt */
 144 #define CONFIG_SYS_CBSIZE               1024
 145 #define CONFIG_SYS_MAXARGS              64
 146 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 147 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 148                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 149
 150 #define CONFIG_IMX_BOOTAUX
 151
 152 #define CONFIG_SYS_FSL_USDHC_NUM        2
 153 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 154
 155 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
 156
 157 #define CONFIG_MXC_GPIO
 158
 159 #define CONFIG_OF_SYSTEM_SETUP
 160
 161 #endif