include/configs/imx8mq_evk.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2018 NXP
   4  */
   5
   6 #ifndef __IMX8M_EVK_H
   7 #define __IMX8M_EVK_H
   8
   9 #include <linux/sizes.h>
  10 #include <linux/stringify.h>
  11 #include <asm/arch/imx-regs.h>
  12
  13 #define CONFIG_SYS_BOOTM_LEN            (64 * SZ_1M)
  14
  15 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
  16
  17 #ifdef CONFIG_SPL_BUILD
  18 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
  19 #define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
  20
  21 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
  22 #define CONFIG_MALLOC_F_ADDR            0x182000
  23 /* For RAW image gives a error info not panic */
  24
  25 #define CONFIG_POWER_PFUZE100
  26 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
  27 #endif
  28
  29 /* ENET Config */
  30 /* ENET1 */
  31 #if defined(CONFIG_CMD_NET)
  32 #define CONFIG_FEC_MXC_PHYADDR          0
  33 #endif
  34
  35 #define BOOT_TARGET_DEVICES(func) \
  36        func(MMC, mmc, 0) \
  37        func(MMC, mmc, 1) \
  38        func(DHCP, dhcp, na)
  39
  40 #include <config_distro_bootcmd.h>
  41
  42 /* Initial environment variables */
  43 #define CONFIG_EXTRA_ENV_SETTINGS               \
  44         BOOTENV \
  45         "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  46         "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  47         "image=Image\0" \
  48         "console=ttymxc0,115200\0" \
  49         "fdt_addr_r=0x43000000\0"                       \
  50         "boot_fdt=try\0" \
  51         "fdtfile=imx8mq-evk.dtb\0" \
  52         "initrd_addr=0x43800000\0"              \
  53         "bootm_size=0x10000000\0" \
  54         "mmcpart=1\0" \
  55         "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
  56
  57 /* Link Definitions */
  58
  59 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
  60 #define CONFIG_SYS_INIT_RAM_SIZE        0x80000
  61
  62
  63 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  64 #define PHYS_SDRAM                      0x40000000
  65 #define PHYS_SDRAM_SIZE                 0xC0000000 /* 3GB DDR */
  66
  67 #define CONFIG_MXC_UART_BASE            UART_BASE_ADDR(1)
  68
  69 #define CONFIG_SYS_FSL_USDHC_NUM        2
  70 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  71
  72 #endif