include/configs/imx8mq_cm.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2018 NXP
   4  */
   5
   6 #ifndef __IMX8M_CM_H
   7 #define __IMX8M_CM_H
   8
   9 #include <linux/sizes.h>
  10 #include <linux/stringify.h>
  11 #include <asm/arch/imx-regs.h>
  12
  13 #define CONFIG_SYS_BOOTM_LEN            (32 * SZ_1M)
  14
  15 #define CONFIG_SPL_MAX_SIZE             (124 * 1024)
  16 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
  17
  18 #ifdef CONFIG_SPL_BUILD
  19 #define CONFIG_SPL_STACK                0x187FF0
  20 #define CONFIG_SPL_BSS_START_ADDR      0x00180000
  21 #define CONFIG_SPL_BSS_MAX_SIZE        0x2000   /* 8 KB */
  22 #define CONFIG_SYS_SPL_MALLOC_START    0x42200000
  23 #define CONFIG_SYS_SPL_MALLOC_SIZE    0x80000   /* 512 KB */
  24 #define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
  25
  26 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
  27 #define CONFIG_MALLOC_F_ADDR            0x182000
  28 /* For RAW image gives a error info not panic */
  29 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
  30
  31 #endif
  32
  33 #define CONFIG_REMAKE_ELF
  34
  35 /* ENET Config */
  36 /* ENET1 */
  37 #if defined(CONFIG_CMD_NET)
  38 #define CONFIG_ETHPRIME                 "FEC"
  39 #endif
  40
  41 #ifndef CONFIG_SPL_BUILD
  42 #define BOOT_TARGET_DEVICES(func) \
  43                 func(MMC, mmc, 0) \
  44                 func(MMC, mmc, 1) \
  45                 func(DHCP, dhcp, na)
  46
  47 #include <config_distro_bootcmd.h>
  48 #endif
  49
  50 /* Initial environment variables */
  51 #define CONFIG_EXTRA_ENV_SETTINGS               \
  52         BOOTENV \
  53         "scriptaddr=0x43500000\0" \
  54         "kernel_addr_r=0x40880000\0" \
  55         "image=Image\0" \
  56         "console=ttymxc0,115200\0" \
  57         "fdt_addr=0x43000000\0"                 \
  58         "boot_fdt=try\0" \
  59         "fdt_file=imx8mq-cm.dtb\0" \
  60         "initrd_addr=0x43800000\0"              \
  61         "bootm_size=0x10000000\0" \
  62         "mmcpart=1\0" \
  63         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  64
  65 /* Link Definitions */
  66
  67 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
  68 #define CONFIG_SYS_INIT_RAM_SIZE        0x80000
  69 #define CONFIG_SYS_INIT_SP_OFFSET \
  70         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  71 #define CONFIG_SYS_INIT_SP_ADDR \
  72         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  73
  74 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"  /* USDHC2 */
  75
  76 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  77 #define PHYS_SDRAM                      0x40000000
  78 #define PHYS_SDRAM_SIZE                                 0x40000000 /* 1 GB DDR */
  79
  80 #define CONFIG_MXC_UART_BASE            UART1_BASE_ADDR
  81
  82 /* Monitor Command Prompt */
  83 #define CONFIG_SYS_CBSIZE               1024
  84 #define CONFIG_SYS_MAXARGS              64
  85 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  86 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
  87                                         sizeof(CONFIG_SYS_PROMPT) + 16)
  88
  89 #define CONFIG_SYS_FSL_USDHC_NUM                2
  90 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  91
  92 #endif