imx: drop CONFIG_MXC_UART_BASE
[platform/kernel/u-boot.git] / include / configs / imx8mp_venice.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2022 Gateworks Corporation
4  */
5
6 #ifndef __IMX8MP_VENICE_H
7 #define __IMX8MP_VENICE_H
8
9 #include <asm/arch/imx-regs.h>
10 #include <linux/sizes.h>
11
12 #define CONFIG_SYS_MONITOR_LEN          SZ_512K
13 #define CONFIG_SYS_UBOOT_BASE   \
14         (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
15
16 #ifdef CONFIG_SPL_BUILD
17 /* For RAW image gives a error info not panic */
18 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
19 #endif
20
21 #define MEM_LAYOUT_ENV_SETTINGS \
22         "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
23         "fdt_addr_r=0x50200000\0" \
24         "scriptaddr=0x50280000\0" \
25         "ramdisk_addr_r=0x50300000\0" \
26         "kernel_comp_addr_r=0x40200000\0"
27
28 /* Enable Distro Boot */
29 #ifndef CONFIG_SPL_BUILD
30 #define BOOT_TARGET_DEVICES(func) \
31         func(MMC, mmc, 1) \
32         func(MMC, mmc, 2) \
33         func(USB, usb, 0) \
34         func(DHCP, dhcp, na)
35 #include <config_distro_bootcmd.h>
36 #else
37 #define BOOTENV
38 #endif
39
40 /* Initial environment variables */
41 #define CONFIG_EXTRA_ENV_SETTINGS \
42         BOOTENV \
43         MEM_LAYOUT_ENV_SETTINGS \
44         "script=boot.scr\0" \
45         "bootm_size=0x10000000\0" \
46         "dev=2\0" \
47         "preboot=gsc wd-disable\0" \
48         "console=ttymxc1,115200\0" \
49         "update_firmware=" \
50                 "tftpboot $loadaddr $image && " \
51                 "setexpr blkcnt $filesize + 0x1ff && " \
52                 "setexpr blkcnt $blkcnt / 0x200 && " \
53                 "mmc dev $dev && " \
54                 "mmc write $loadaddr 0x40 $blkcnt\0" \
55         "loadfdt=" \
56                 "if $fsload $fdt_addr_r $dir/$fdt_file1; " \
57                         "then echo loaded $fdt_file1; " \
58                 "elif $fsload $fdt_addr_r $dir/$fdt_file2; " \
59                         "then echo loaded $fdt_file2; " \
60                 "elif $fsload $fdt_addr_r $dir/$fdt_file3; " \
61                         "then echo loaded $fdt_file3; " \
62                 "elif $fsload $fdt_addr_r $dir/$fdt_file4; " \
63                         "then echo loaded $fdt_file4; " \
64                 "elif $fsload $fdt_addr_r $dir/$fdt_file5; " \
65                         "then echo loaded $fdt_file5; " \
66                 "fi\0" \
67         "boot_net=" \
68                 "setenv fsload tftpboot; " \
69                 "run loadfdt && tftpboot $kernel_addr_r $dir/Image && " \
70                 "booti $kernel_addr_r - $fdt_addr_r\0" \
71         "update_rootfs=" \
72                 "tftpboot $loadaddr $image && " \
73                 "gzwrite mmc $dev $loadaddr $filesize 100000 1000000\0" \
74         "update_all=" \
75                 "tftpboot $loadaddr $image && " \
76                 "gzwrite mmc $dev $loadaddr $filesize\0" \
77         "erase_env=mmc dev $dev; mmc erase 0x7f08 0x40\0"
78
79 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
80 #define CONFIG_SYS_INIT_RAM_SIZE        SZ_2M
81
82 #define CONFIG_SYS_SDRAM_BASE           0x40000000
83
84 /* SDRAM configuration */
85 #define PHYS_SDRAM                      0x40000000
86 #define PHYS_SDRAM_SIZE                 SZ_4G
87 #define CONFIG_SYS_BOOTM_LEN            SZ_256M
88
89 /* FEC */
90 #define FEC_QUIRK_ENET_MAC
91
92 #endif