include/configs/imx8mp_dhcom_pdk2.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2022 Marek Vasut <marex@denx.de>
   4  */
   5
   6 #ifndef __IMX8MP_DHCOM_PDK2_H
   7 #define __IMX8MP_DHCOM_PDK2_H
   8
   9 #include <linux/sizes.h>
  10 #include <linux/stringify.h>
  11 #include <asm/arch/imx-regs.h>
  12
  13 #define CONFIG_SYS_BOOTM_LEN            SZ_128M
  14
  15 #define CONFIG_SYS_MONITOR_LEN          SZ_1M
  16
  17 #ifdef CONFIG_SPL_BUILD
  18 /* For RAW image gives a error info not panic */
  19 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
  20
  21 #endif
  22
  23 /* Link Definitions */
  24 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
  25 #define CONFIG_SYS_INIT_RAM_SIZE        0x200000
  26
  27 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  28 #define PHYS_SDRAM                      0x40000000
  29 #define PHYS_SDRAM_SIZE                 0x20000000 /* Minimum 512 MiB DDR */
  30
  31 #define CONFIG_MXC_UART_BASE            UART1_BASE_ADDR
  32
  33 /* PHY needs a longer autonegotiation timeout after reset */
  34 #define PHY_ANEG_TIMEOUT                20000
  35 #define FEC_QUIRK_ENET_MAC
  36
  37 /* USDHC */
  38 #define CONFIG_SYS_FSL_USDHC_NUM        2
  39 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  40
  41 #if !defined(CONFIG_SPL_BUILD)
  42
  43 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  44         "altbootcmd=run bootcmd ; reset\0"                              \
  45         "bootlimit=3\0"                                                 \
  46         "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0"         \
  47         "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0"        \
  48         "ramdisk_addr_r=0x58000000\0"                                   \
  49         "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0"            \
  50         /* Give slow devices beyond USB HUB chance to come up. */       \
  51         "usb_pgood_delay=2000\0"                                        \
  52         "dfu_alt_info="                                                 \
  53                 /* RAM block at DRAM offset 256..768 MiB */             \
  54                 "ram ram0=ram ram 0x50000000 0x20000000&"               \
  55                 /* 16 MiB SPI NOR */                                    \
  56                 "mtd nor0=sf raw 0x0 0x1000000\0"                       \
  57         "dh_update_env="                                                \
  58                 "setenv dh_update_env true ; saveenv ; saveenv\0"       \
  59         "dh_update_sf_gen_fcfb="                                        \
  60                 "setexpr sfaddr ${loadaddr} - 0x1000 ; "                \
  61                 "base ${sfaddr} ; "                                     \
  62                 "mw 0 0 0x400 ; "                                       \
  63                 "mw 0x400 0x42464346 ; "                                \
  64                 "mw 0x404 0x56010000 ; "                                \
  65                 "mw 0x40c 00030300 ; "                                  \
  66                 "mw 0x444 0x00020101 ; "                                \
  67                 "mw 0x450 0x10000000 ; "                                \
  68                 "mw 0x480 0x0818040b ; "                                \
  69                 "mw 0x484 0x24043008 ; "                                \
  70                 "mw 0x5c0 0x100 ; "                                     \
  71                 "mw 0x5c4 0x10000 ; "                                   \
  72                 "base 0\0"                                              \
  73         "dh_update_sf_write_data="                                      \
  74                 "setexpr sfaddr ${loadaddr} - 0x1000 ; "                \
  75                 "setexpr filesize ${filesize} + 0x1000 ; "              \
  76                 "sf probe && sf update ${sfaddr} 0 ${filesize}\0"       \
  77         "dh_update_sd_to_sf="                                           \
  78                 "load mmc 0:1 ${loadaddr} boot/flash.bin && "           \
  79                 "run dh_update_sf_gen_fcfb dh_update_sf_write_data\0"   \
  80         "dh_update_emmc_to_sf="                                         \
  81                 "load mmc 1:1 ${loadaddr} boot/flash.bin && "           \
  82                 "run dh_update_sf_gen_fcfb dh_update_sf_write_data\0"   \
  83         BOOTENV
  84
  85 #define BOOT_TARGET_DEVICES(func)       \
  86         func(MMC, mmc, 0)               \
  87         func(MMC, mmc, 1)               \
  88         func(USB, usb, 0)               \
  89         func(DHCP, dhcp, na)
  90
  91 #include <config_distro_bootcmd.h>
  92
  93 #endif
  94
  95 #endif