include/configs/imx8mm-cl-iot-gate.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2019 NXP
   4  */
   5
   6 #ifndef __IMX8MM_CL_IOT_GATE_H
   7 #define __IMX8MM_CL_IOT_GATE_H
   8
   9 #include <linux/sizes.h>
  10 #include <linux/stringify.h>
  11 #include <asm/arch/imx-regs.h>
  12 #include <config_distro_bootcmd.h>
  13
  14 #define CONFIG_SYS_MONITOR_LEN          SZ_512K
  15 #define CONFIG_SYS_UBOOT_BASE   \
  16         (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
  17
  18 #ifdef CONFIG_SPL_BUILD
  19 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
  20 #define CONFIG_MALLOC_F_ADDR            0x912000
  21 /* For RAW image gives a error info not panic */
  22
  23 #endif
  24
  25 /* GUIDs for capsule updatable firmware images */
  26 #define IMX8MM_CL_IOT_GATE_FIT_IMAGE_GUID \
  27         EFI_GUID(0x7a32a939, 0xab92, 0x467b, 0x91, 0x52, \
  28                  0x74, 0x77, 0x1b, 0x95, 0xe6, 0x46)
  29
  30 #define IMX8MM_CL_IOT_GATE_OPTEE_FIT_IMAGE_GUID \
  31         EFI_GUID(0x0bf1165c, 0x1831, 0x4864, 0x94, 0x5e, \
  32                  0xac, 0x3d, 0x38, 0x48, 0xf4, 0x99)
  33
  34 #if CONFIG_IS_ENABLED(CMD_MMC)
  35 # define BOOT_TARGET_MMC(func) \
  36         func(MMC, mmc, 2)      \
  37         func(MMC, mmc, 0)
  38 #else
  39 # define BOOT_TARGET_MMC(func)
  40 #endif
  41
  42 #if CONFIG_IS_ENABLED(CMD_USB)
  43 # define BOOT_TARGET_USB(func) func(USB, usb, 0)
  44 #else
  45 # define BOOT_TARGET_USB(func)
  46 #endif
  47
  48 #if CONFIG_IS_ENABLED(CMD_PXE)
  49 # define BOOT_TARGET_PXE(func) func(PXE, pxe, na)
  50 #else
  51 # define BOOT_TARGET_PXE(func)
  52 #endif
  53
  54 #if CONFIG_IS_ENABLED(CMD_DHCP)
  55 # define BOOT_TARGET_DHCP(func) func(DHCP, dhcp, na)
  56 #else
  57 # define BOOT_TARGET_DHCP(func)
  58 #endif
  59
  60 #define BOOT_TARGET_DEVICES(func) \
  61         BOOT_TARGET_USB(func) \
  62         BOOT_TARGET_MMC(func) \
  63         BOOT_TARGET_PXE(func) \
  64         BOOT_TARGET_DHCP(func)
  65
  66 /* Initial environment variables */
  67 #define CONFIG_EXTRA_ENV_SETTINGS               \
  68         BOOTENV \
  69         "script=boot.scr\0" \
  70         "image=Image\0" \
  71         "console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200\0" \
  72         "fdt_addr=0x43000000\0"                 \
  73         "fdt_addr_r=0x43000000\0" \
  74         "boot_fit=no\0" \
  75         "dfu_alt_info=mmc 2=flash-bin raw 0x42 0x1D00 mmcpart 1\0" \
  76         "fdt_file=sb-iotgimx8.dtb\0" \
  77         "fdtfile=sb-iotgimx8.dtb\0" \
  78         "initrd_addr=0x43800000\0"              \
  79         "bootm_size=0x10000000\0" \
  80         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  81         "mmcpart=1\0" \
  82         "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
  83         "mmcautodetect=yes\0" \
  84         "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
  85         "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  86         "bootscript=echo Running bootscript from mmc ...; " \
  87                 "source\0" \
  88         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  89         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  90         "kernel_addr_r=0x40480000\0" \
  91         "pxefile_addr_r=0x40480000\0" \
  92         "ramdisk_addr_r=0x43800000\0" \
  93         "mmcboot=echo Booting from mmc ...; " \
  94                 "run mmcargs; " \
  95                 "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
  96                         "bootm ${loadaddr}; " \
  97                 "else " \
  98                         "if run loadfdt; then " \
  99                                 "booti ${loadaddr} - ${fdt_addr}; " \
 100                         "else " \
 101                                 "echo WARN: Cannot load the DT; " \
 102                         "fi; " \
 103                 "fi;\0" \
 104         "netargs=setenv bootargs console=${console} " \
 105                 "root=/dev/nfs " \
 106                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 107         "netboot=echo Booting from net ...; " \
 108                 "run netargs;  " \
 109                 "if test ${ip_dyn} = yes; then " \
 110                         "setenv get_cmd dhcp; " \
 111                 "else " \
 112                         "setenv get_cmd tftp; " \
 113                 "fi; " \
 114                 "${get_cmd} ${loadaddr} ${image}; " \
 115                 "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
 116                         "bootm ${loadaddr}; " \
 117                 "else " \
 118                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 119                                 "booti ${loadaddr} - ${fdt_addr}; " \
 120                         "else " \
 121                                 "echo WARN: Cannot load the DT; " \
 122                         "fi; " \
 123                 "fi;\0"
 124
 125 /* Link Definitions */
 126
 127 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 128 #define CONFIG_SYS_INIT_RAM_SIZE        0x80000
 129
 130
 131 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 132 #define PHYS_SDRAM                      0x40000000
 133 #define PHYS_SDRAM_SIZE                 0x80000000 /* 2GB DDR */
 134
 135 /* USDHC */
 136
 137 #define CONFIG_SYS_FSL_USDHC_NUM        2
 138 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 139
 140 #define CONFIG_FEC_MXC_PHYADDR          0
 141
 142 /* USB Configs */
 143 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 144
 145 #endif /*__IMX8MM_CL_IOT_GATE_H*/