include/configs/imx6dl-mamoj.h

   1 /*
   2  * Copyright (C) 2018 Simone CIANNI <simone.cianni@bticino.it>
   3  * Copyright (C) 2018 Raffaele RECALCATI <raffaele.recalcati@bticino.it>
   4  * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
   5  *
   6  * Configuration settings for the BTicion i.MX6DL Mamoj board.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __IMX6DL_MAMOJ_CONFIG_H
  12 #define __IMX6DL_MAMOJ_CONFIG_H
  13
  14 #include <linux/sizes.h>
  15 #include "mx6_common.h"
  16
  17 /* Size of malloc() pool */
  18 #define CONFIG_SYS_MALLOC_LEN           (35 * SZ_1M)
  19
  20 /* Total Size of Environment Sector */
  21 #define CONFIG_ENV_SIZE                 SZ_128K
  22
  23 /* Allow to overwrite serial and ethaddr */
  24 #define CONFIG_ENV_OVERWRITE
  25
  26 /* Environment */
  27 #ifndef CONFIG_ENV_IS_NOWHERE
  28 /* Environment in MMC */
  29 # if defined(CONFIG_ENV_IS_IN_MMC)
  30 #  define CONFIG_ENV_OFFSET             0x100000
  31 # endif
  32 #endif
  33
  34 #ifndef CONFIG_SPL_BUILD
  35 #define CONFIG_EXTRA_ENV_SETTINGS       \
  36         "scriptaddr=0x14000000\0"       \
  37         "fdt_addr_r=0x13000000\0"       \
  38         "kernel_addr_r=0x10008000\0"    \
  39         "fdt_high=0xffffffff\0"         \
  40         "dfu_alt_info_spl=spl raw 0x2 0x400\0" \
  41         "dfu_alt_info_uboot=u-boot raw 0x8a 0x11400\0" \
  42         BOOTENV
  43
  44 #define BOOT_TARGET_DEVICES(func) \
  45         func(MMC, mmc, 2)
  46
  47 #include <config_distro_bootcmd.h>
  48 #endif
  49
  50 /* UART */
  51 #define CONFIG_MXC_UART_BASE            UART3_BASE
  52
  53 /* MMC */
  54 #define CONFIG_SYS_MMC_ENV_DEV          2
  55 #define CONFIG_SUPPORT_EMMC_BOOT
  56
  57 /* Ethernet */
  58 #define CONFIG_FEC_MXC_PHYADDR          1
  59 #define CONFIG_MII
  60
  61 /* USB */
  62 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  63 #define CONFIG_MXC_USB_PORTSC                   (PORT_PTS_UTMI | PORT_PTS_PTW)
  64 #define CONFIG_MXC_USB_FLAGS                    0
  65 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
  66
  67 /* Miscellaneous configurable options */
  68 #define CONFIG_SYS_MEMTEST_START        0x80000000
  69 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x8000000)
  70
  71 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
  72 #define CONFIG_SYS_HZ                   1000
  73
  74 /* Physical Memory Map */
  75 #define CONFIG_NR_DRAM_BANKS            1
  76 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  77
  78 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  79 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  80 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  81
  82 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_INIT_RAM_SIZE - \
  83                                         GENERATED_GBL_DATA_SIZE)
  84 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
  85                                         CONFIG_SYS_INIT_SP_OFFSET)
  86
  87 /* SPL */
  88 #include "imx6_spl.h"
  89
  90 #endif /* __IMX6DL_MAMOJ_CONFIG_H */