2 * Copyright (C) 2014 Gateworks Corporation
3 * Author: Tim Harvey <tharvey@gateworks.com>
5 * SPDX-License-Identifier: GPL-2.0+
7 #ifndef __IMX6_SPL_CONFIG_H
8 #define __IMX6_SPL_CONFIG_H
12 #define CONFIG_SPL_FRAMEWORK
15 * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals:
16 * - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF
17 * - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well
18 * - BOOT ROM stack is at 0x0091FFB8
19 * - if icache/dcache is enabled (eFuse/strapping controlled) then the
20 * IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to
21 * fit between 0x00907000 and 0x00918000.
22 * - Additionally the BOOT ROM loads what they consider the firmware image
23 * which consists of a 4K header in front of us that contains the IVT, DCD
24 * and some padding thus 'our' max size is really 0x00908000 - 0x00918000
27 #define CONFIG_SPL_TEXT_BASE 0x00908000
28 #define CONFIG_SPL_MAX_SIZE 0x10000
29 #define CONFIG_SPL_STACK 0x0091FFB8
31 * Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the
32 * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
33 * boot media (given that boot media specific offset is configured properly).
35 #define CONFIG_SPL_PAD_TO 0x11000
38 #if defined(CONFIG_SPL_MMC_SUPPORT)
39 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
40 #define CONFIG_SYS_MONITOR_LEN 409600 /* 400 KB */
44 #if defined(CONFIG_SPL_SATA_SUPPORT)
45 #define CONFIG_SPL_SATA_BOOT_DEVICE 0
46 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1
49 /* Define the payload for FAT/EXT support */
50 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
51 # ifdef CONFIG_OF_CONTROL
52 # define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
54 # define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
58 #if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6SL)
59 #define CONFIG_SPL_BSS_START_ADDR 0x88200000
60 #define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
61 #define CONFIG_SYS_SPL_MALLOC_START 0x88300000
62 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
63 #define CONFIG_SYS_TEXT_BASE 0x87800000
65 #define CONFIG_SPL_BSS_START_ADDR 0x18200000
66 #define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
67 #define CONFIG_SYS_SPL_MALLOC_START 0x18300000
68 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
69 #define CONFIG_SYS_TEXT_BASE 0x17800000