1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * (C) Copyright 2015 Linaro
5 * Peter Griffin <peter.griffin@linaro.org>
7 * Configuration for HiKey 96boards CE. Parts were derived from other ARM
14 #include <linux/sizes.h>
17 #define CONFIG_POWER_HI6553
19 #define CONFIG_REMAKE_ELF
21 /* Physical Memory Map */
23 /* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
25 #define PHYS_SDRAM_1 0x00000000
27 /* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/
28 #define PHYS_SDRAM_1_SIZE 0x3EFFFFFF
30 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
32 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000
34 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
36 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
38 /* Generic Timer Definitions */
39 #define COUNTER_FREQUENCY 19000000
41 /* Generic Interrupt Controller Definitions */
42 #define GICD_BASE 0xf6801000
43 #define GICC_BASE 0xf6802000
45 /* Size of malloc() pool */
46 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
49 #define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
50 /*#define CONFIG_DWC2_DFLT_SPEED_FULL*/
51 #define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
53 #define CONFIG_MISC_INIT_R
56 #define CONFIG_HIKEY_GPIO
58 /* SD/MMC configuration */
59 #define CONFIG_BOUNCE_BUFFER
61 /* Command line configuration */
64 #define CONFIG_BOOTP_BOOTFILESIZE
66 /* Initial environment variables */
69 * Defines where the kernel and FDT will be put in RAM
72 #define BOOT_TARGET_DEVICES(func) \
76 #include <config_distro_bootcmd.h>
78 #define CONFIG_EXTRA_ENV_SETTINGS \
79 "kernel_name=Image\0" \
80 "kernel_addr_r=0x00080000\0" \
81 "fdtfile=hi6220-hikey.dtb\0" \
82 "fdt_addr_r=0x02000000\0" \
83 "fdt_high=0xffffffffffffffff\0" \
84 "initrd_high=0xffffffffffffffff\0" \
87 /* Preserve environment on sd card */
88 #define CONFIG_ENV_SIZE 0x1000
90 /* Monitor Command Prompt */
91 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
92 #define CONFIG_SYS_MAXARGS 64 /* max command args */
94 #endif /* __HIKEY_H */