Merge git://git.denx.de/u-boot-spi
[platform/kernel/u-boot.git] / include / configs / hikey.h
1 /*
2  * (C) Copyright 2015 Linaro
3  *
4  * Peter Griffin <peter.griffin@linaro.org>
5  *
6  * Configuration for HiKey 96boards CE. Parts were derived from other ARM
7  * configurations.
8  *
9  * SPDX-License-Identifier:     GPL-2.0+
10  */
11
12 #ifndef __HIKEY_H
13 #define __HIKEY_H
14
15 #include <linux/sizes.h>
16
17 #define CONFIG_POWER
18 #define CONFIG_POWER_HI6553
19
20 #define CONFIG_REMAKE_ELF
21
22 #define CONFIG_SUPPORT_RAW_INITRD
23
24 /* Physical Memory Map */
25
26 /* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
27 #define CONFIG_SYS_TEXT_BASE            0x35000000
28
29 #define CONFIG_NR_DRAM_BANKS            6
30 #define PHYS_SDRAM_1                    0x00000000
31
32 /* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/
33 #define PHYS_SDRAM_1_SIZE               0x3EFFFFFF
34
35 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
36
37 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000
38
39 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
40
41 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x80000)
42
43 /* Generic Timer Definitions */
44 #define COUNTER_FREQUENCY               19000000
45
46 /* Generic Interrupt Controller Definitions */
47 #define GICD_BASE                       0xf6801000
48 #define GICC_BASE                       0xf6802000
49
50 /* Size of malloc() pool */
51 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + SZ_8M)
52
53 /* Serial port PL010/PL011 through the device model */
54 #define CONFIG_PL01X_SERIAL
55
56 #ifdef CONFIG_CMD_USB
57 #define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
58 /*#define CONFIG_DWC2_DFLT_SPEED_FULL*/
59 #define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
60
61 #define CONFIG_USB_HOST_ETHER
62 #define CONFIG_USB_ETHER_SMSC95XX
63 #define CONFIG_USB_ETHER_ASIX
64 #define CONFIG_MISC_INIT_R
65 #endif
66
67 #define CONFIG_HIKEY_GPIO
68
69 /* SD/MMC configuration */
70 #define CONFIG_BOUNCE_BUFFER
71
72 #define CONFIG_FS_EXT4
73
74 /* Command line configuration */
75
76 #define CONFIG_MTD_PARTITIONS
77
78 /* BOOTP options */
79 #define CONFIG_BOOTP_BOOTFILESIZE
80
81 #include <config_distro_defaults.h>
82
83 /* Initial environment variables */
84
85 /*
86  * Defines where the kernel and FDT will be put in RAM
87  */
88
89 #define BOOT_TARGET_DEVICES(func) \
90         func(USB, usb, 0) \
91         func(MMC, mmc, 1) \
92         func(DHCP, dhcp, na)
93 #include <config_distro_bootcmd.h>
94
95 #define CONFIG_EXTRA_ENV_SETTINGS       \
96                                 "kernel_name=Image\0"   \
97                                 "kernel_addr_r=0x00080000\0" \
98                                 "fdtfile=hi6220-hikey.dtb\0" \
99                                 "fdt_addr_r=0x02000000\0" \
100                                 "fdt_high=0xffffffffffffffff\0" \
101                                 "initrd_high=0xffffffffffffffff\0" \
102                                 BOOTENV
103
104 /* Preserve environment on sd card */
105 #define CONFIG_ENV_SIZE                 0x1000
106 #define CONFIG_ENV_VARS_UBOOT_CONFIG
107
108 /* Monitor Command Prompt */
109 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
110 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
111                                         sizeof(CONFIG_SYS_PROMPT) + 16)
112 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
113 #define CONFIG_SYS_LONGHELP
114 #define CONFIG_CMDLINE_EDITING
115 #define CONFIG_SYS_MAXARGS              64      /* max command args */
116
117 #endif /* __HIKEY_H */