Convert CONFIG_BOARD_EARLY_INIT_F to Kconfig
[platform/kernel/u-boot.git] / include / configs / hikey.h
1 /*
2  * (C) Copyright 2015 Linaro
3  *
4  * Peter Griffin <peter.griffin@linaro.org>
5  *
6  * Configuration for HiKey 96boards CE. Parts were derived from other ARM
7  * configurations.
8  *
9  * SPDX-License-Identifier:     GPL-2.0+
10  */
11
12 #ifndef __HIKEY_H
13 #define __HIKEY_H
14
15 #include <linux/sizes.h>
16
17 #define CONFIG_POWER
18 #define CONFIG_POWER_HI6553
19
20 #define CONFIG_REMAKE_ELF
21
22 #define CONFIG_SUPPORT_RAW_INITRD
23
24 /* Physical Memory Map */
25
26 /* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
27 #define CONFIG_SYS_TEXT_BASE            0x35000000
28
29 #define CONFIG_NR_DRAM_BANKS            6
30 #define PHYS_SDRAM_1                    0x00000000
31
32 /* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/
33 #define PHYS_SDRAM_1_SIZE               0x3EFFFFFF
34
35 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
36
37 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000
38
39 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
40
41 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x80000)
42
43 /* Generic Timer Definitions */
44 #define COUNTER_FREQUENCY               19000000
45
46 /* Generic Interrupt Controller Definitions */
47 #define GICD_BASE                       0xf6801000
48 #define GICC_BASE                       0xf6802000
49
50 /* Size of malloc() pool */
51 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + SZ_8M)
52
53 /* Serial port PL010/PL011 through the device model */
54 #define CONFIG_PL01X_SERIAL
55 #define CONFIG_BAUDRATE                 115200
56
57 #ifdef CONFIG_CMD_USB
58 #define CONFIG_USB_DWC2
59 #define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
60 /*#define CONFIG_DWC2_DFLT_SPEED_FULL*/
61 #define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
62
63 #define CONFIG_USB_HOST_ETHER
64 #define CONFIG_USB_ETHER_SMSC95XX
65 #define CONFIG_USB_ETHER_ASIX
66 #define CONFIG_MISC_INIT_R
67 #endif
68
69 #define CONFIG_HIKEY_GPIO
70
71 /* SD/MMC configuration */
72 #define CONFIG_GENERIC_MMC
73 #define CONFIG_BOUNCE_BUFFER
74
75 #define CONFIG_FS_EXT4
76
77 /* Command line configuration */
78 #define CONFIG_CMD_UNZIP
79 #define CONFIG_CMD_ENV
80
81 #define CONFIG_MTD_PARTITIONS
82
83 /* BOOTP options */
84 #define CONFIG_BOOTP_BOOTFILESIZE
85
86 #include <config_distro_defaults.h>
87
88 /* Initial environment variables */
89
90 /*
91  * Defines where the kernel and FDT will be put in RAM
92  */
93
94 /* Assume we boot with root on the seventh partition of eMMC */
95 #define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw"
96
97 #define BOOT_TARGET_DEVICES(func) \
98         func(USB, usb, 0) \
99         func(MMC, mmc, 1) \
100         func(DHCP, dhcp, na)
101 #include <config_distro_bootcmd.h>
102
103 #define CONFIG_EXTRA_ENV_SETTINGS       \
104                                 "kernel_name=Image\0"   \
105                                 "kernel_addr_r=0x00080000\0" \
106                                 "fdtfile=hi6220-hikey.dtb\0" \
107                                 "fdt_addr_r=0x02000000\0" \
108                                 "fdt_high=0xffffffffffffffff\0" \
109                                 "initrd_high=0xffffffffffffffff\0" \
110                                 BOOTENV
111
112 /* Preserve environment on sd card */
113 #define CONFIG_COMMAND_HISTORY
114
115 #define CONFIG_ENV_SIZE                 0x1000
116 #define CONFIG_ENV_IS_IN_FAT
117 #define FAT_ENV_INTERFACE               "mmc"
118 #define FAT_ENV_DEVICE_AND_PART         "1:1"
119 #define FAT_ENV_FILE                    "uboot.env"
120 #define CONFIG_FAT_WRITE
121 #define CONFIG_ENV_VARS_UBOOT_CONFIG
122
123 /* Monitor Command Prompt */
124 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
125 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
126                                         sizeof(CONFIG_SYS_PROMPT) + 16)
127 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
128 #define CONFIG_SYS_LONGHELP
129 #define CONFIG_CMDLINE_EDITING
130 #define CONFIG_SYS_MAXARGS              64      /* max command args */
131
132 #define CONFIG_SYS_NO_FLASH
133
134 #endif /* __HIKEY_H */