include/configs/gw_ventana.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Gateworks Corporation
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 /* SPL */
  10 /* Location in NAND to read U-Boot from */
  11 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  12
  13 /* Falcon Mode */
  14 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  15
  16 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  17 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  18
  19 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  20 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  21 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  22 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  23
  24 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  25 #include "mx6_common.h"
  26
  27 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  28
  29 /* Serial ATAG */
  30 #define CONFIG_SERIAL_TAG
  31
  32 /* Serial */
  33 #define CONFIG_MXC_UART_BASE           UART2_BASE
  34
  35 /* NAND */
  36 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  37
  38 #undef CONFIG_SYS_BOOTM_LEN
  39 #define CONFIG_SYS_BOOTM_LEN            (64 << 20)
  40
  41 /* I2C Configs */
  42 #define CONFIG_I2C_GSC                  0
  43 #define CONFIG_I2C_EDID
  44
  45 /* MMC Configs */
  46 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  47
  48 /*
  49  * SATA Configs
  50  */
  51 #ifdef CONFIG_CMD_SATA
  52   #define CONFIG_SYS_SATA_MAX_DEVICE    1
  53   #define CONFIG_DWC_AHSATA_PORT_ID     0
  54   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
  55   #define CONFIG_LBA48
  56 #endif
  57
  58 /*
  59  * PCI express
  60  */
  61 #ifdef CONFIG_CMD_PCI
  62 #define CONFIG_PCIE_IMX
  63 #endif
  64
  65 /*
  66  * PMIC
  67  */
  68 #define CONFIG_POWER
  69 #define CONFIG_POWER_I2C
  70 #define CONFIG_POWER_PFUZE100
  71 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  72 #define CONFIG_POWER_LTC3676
  73 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
  74
  75 /* Various command support */
  76
  77 /* USB Configs */
  78 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
  79 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
  80 #define CONFIG_MXC_USB_FLAGS      0
  81 #define CONFIG_USBD_HS
  82
  83 /* Framebuffer and LCD */
  84 #define CONFIG_VIDEO_LOGO
  85 #define CONFIG_IMX_HDMI
  86 #define CONFIG_IMX_VIDEO_SKIP
  87 #define CONFIG_VIDEO_BMP_LOGO
  88 #define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */
  89
  90 /* Miscellaneous configurable options */
  91 #define CONFIG_HWCONFIG
  92
  93 /* Memory configuration */
  94
  95 /* Physical Memory Map */
  96 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
  97 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
  98 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
  99 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 100
 101 #define CONFIG_SYS_INIT_SP_OFFSET \
 102         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 103 #define CONFIG_SYS_INIT_SP_ADDR \
 104         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 105
 106 /*
 107  * MTD Command for mtdparts
 108  */
 109
 110 /* Persistent Environment Config */
 111
 112 /* Environment */
 113 #define CONFIG_IPADDR             192.168.1.1
 114 #define CONFIG_SERVERIP           192.168.1.146
 115
 116 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 117         "splashpos=m,m\0" \
 118         "usb_pgood_delay=2000\0" \
 119         "console=ttymxc1\0" \
 120         "bootdevs=usb mmc sata flash\0" \
 121         "hwconfig=_UNKNOWN_\0" \
 122         "video=\0" \
 123         \
 124         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 125         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 126         "disk=0\0" \
 127         "part=1\0" \
 128         \
 129         "fdt_high=0xffffffff\0" \
 130         "fdt_addr=0x18000000\0" \
 131         "initrd_high=0xffffffff\0" \
 132         "fixfdt=" \
 133                 "fdt addr ${fdt_addr}\0" \
 134         "bootdir=boot\0" \
 135         "loadfdt=" \
 136                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 137                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 138                         "run fixfdt; " \
 139                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 140                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 141                         "run fixfdt; " \
 142                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 143                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 144                         "run fixfdt; " \
 145                 "fi\0" \
 146         \
 147         "fs=ext4\0" \
 148         "script=6x_bootscript-ventana\0" \
 149         "loadscript=" \
 150                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 151                         "source ${loadaddr}; " \
 152                 "fi\0" \
 153         \
 154         "uimage=uImage\0" \
 155         "mmc_root=mmcblk0p1\0" \
 156         "mmc_boot=" \
 157                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
 158                 "mmc dev ${disk} && mmc rescan && " \
 159                 "setenv dtype mmc; run loadscript; " \
 160                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 161                         "setenv bootargs console=${console},${baudrate} " \
 162                                 "root=/dev/${mmc_root} rootfstype=${fs} " \
 163                                 "rootwait rw ${video} ${extra}; " \
 164                         "if run loadfdt; then " \
 165                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 166                         "else " \
 167                                 "bootm; " \
 168                         "fi; " \
 169                 "fi\0" \
 170         \
 171         "sata_boot=" \
 172                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
 173                 "sata init && " \
 174                 "setenv dtype sata; run loadscript; " \
 175                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 176                         "setenv bootargs console=${console},${baudrate} " \
 177                                 "root=/dev/sda1 rootfstype=${fs} " \
 178                                 "rootwait rw ${video} ${extra}; " \
 179                         "if run loadfdt; then " \
 180                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 181                         "else " \
 182                                 "bootm; " \
 183                         "fi; " \
 184                 "fi\0" \
 185         "usb_boot=" \
 186                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
 187                 "usb start && usb dev ${disk} && " \
 188                 "setenv dtype usb; run loadscript; " \
 189                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 190                         "setenv bootargs console=${console},${baudrate} " \
 191                                 "root=/dev/sda1 rootfstype=${fs} " \
 192                                 "rootwait rw ${video} ${extra}; " \
 193                         "if run loadfdt; then " \
 194                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 195                         "else " \
 196                                 "bootm; " \
 197                         "fi; " \
 198                 "fi\0"
 199
 200 #ifdef CONFIG_SPI_FLASH
 201         #define CONFIG_EXTRA_ENV_SETTINGS \
 202         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 203         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 204         "image_uboot=ventana/u-boot_spi.imx\0" \
 205         \
 206         "spi_koffset=0x90000\0" \
 207         "spi_klen=0x200000\0" \
 208         \
 209         "spi_updateuboot=echo Updating uboot from " \
 210                 "${serverip}:${image_uboot}...; " \
 211                 "tftpboot ${loadaddr} ${image_uboot} && " \
 212                 "sf probe && sf erase 0 80000 && " \
 213                         "sf write ${loadaddr} 400 ${filesize}\0" \
 214         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 215                 "to ${spi_koffset} ...; " \
 216                 "tftp ${loadaddr} ${image_os} && " \
 217                 "sf probe && " \
 218                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 219         \
 220         "flash_boot=" \
 221                 "if sf probe && " \
 222                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 223                         "setenv bootargs console=${console},${baudrate} " \
 224                                 "root=/dev/mtdblock3 " \
 225                                 "rootfstype=squashfs,jffs2 " \
 226                                 "${video} ${extra}; " \
 227                         "bootm; " \
 228                 "fi\0"
 229 #else
 230         #define CONFIG_EXTRA_ENV_SETTINGS \
 231         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 232         \
 233         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 234         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 235                 "tftp ${loadaddr} ${image_rootfs} && " \
 236                 "nand erase.part rootfs && " \
 237                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 238         \
 239         "flash_boot=" \
 240                 "setenv fsload 'ubifsload'; " \
 241                 "ubi part rootfs; " \
 242                 "if ubi check boot; then " \
 243                         "ubifsmount ubi0:boot; " \
 244                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 245                                 "rootfstype=squashfs,ubifs; " \
 246                         "setenv bootdir; " \
 247                 "elif ubi check rootfs; then " \
 248                         "ubifsmount ubi0:rootfs; " \
 249                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 250                                 "rootfstype=ubifs; " \
 251                 "fi; " \
 252                 "setenv dtype nand; run loadscript; " \
 253                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 254                         "setenv bootargs console=${console},${baudrate} " \
 255                                 "root=${root} ${video} ${extra}; " \
 256                         "if run loadfdt; then " \
 257                                 "ubifsumount; " \
 258                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 259                         "else " \
 260                                 "ubifsumount; bootm; " \
 261                         "fi; " \
 262                 "fi\0"
 263 #endif
 264
 265 #define CONFIG_BOOTCOMMAND \
 266         "for btype in ${bootdevs}; do " \
 267                 "echo; echo Attempting ${btype} boot...; " \
 268                 "if run ${btype}_boot; then; fi; " \
 269         "done"
 270
 271 #endif                         /* __CONFIG_H */