1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2013 Gateworks Corporation
10 /* Location in NAND to read U-Boot from */
11 #define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M)
14 #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
16 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
17 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
19 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
20 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
21 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
22 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
24 #include "imx6_spl.h" /* common IMX6 SPL configuration */
25 #include "mx6_common.h"
27 #define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
30 #define CONFIG_SERIAL_TAG
32 /* Size of malloc() pool */
33 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
38 #ifndef CONFIG_SPL_BUILD
39 #define CONFIG_DM_THERMAL
43 #define CONFIG_IMX_THERMAL
46 #define CONFIG_MXC_UART
47 #define CONFIG_MXC_UART_BASE UART2_BASE
49 #if !defined(CONFIG_SPI_FLASH) && defined(CONFIG_SPL_NAND_SUPPORT)
50 /* Enable NAND support */
51 #ifdef CONFIG_CMD_NAND
52 #define CONFIG_SYS_MAX_NAND_DEVICE 1
53 #define CONFIG_SYS_NAND_BASE 0x40000000
54 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
55 #define CONFIG_SYS_NAND_ONFI_DETECTION
57 /* DMA stuff, needed for GPMI/MXS NAND support */
60 #endif /* CONFIG_SPI_FLASH */
63 #define CONFIG_SYS_I2C
64 #define CONFIG_SYS_I2C_MXC
65 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
66 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
67 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
68 #define CONFIG_SYS_I2C_SPEED 100000
69 #define CONFIG_I2C_GSC 0
70 #define CONFIG_I2C_EDID
73 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
78 #ifdef CONFIG_CMD_SATA
79 #define CONFIG_SYS_SATA_MAX_DEVICE 1
80 #define CONFIG_DWC_AHSATA_PORT_ID 0
81 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
89 #define CONFIG_PCI_SCAN_SHOW
90 #define CONFIG_PCI_FIXUP_DEV
91 #define CONFIG_PCIE_IMX
98 #define CONFIG_POWER_I2C
99 #define CONFIG_POWER_PFUZE100
100 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
101 #define CONFIG_POWER_LTC3676
102 #define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
104 /* Various command support */
105 #define CONFIG_CMD_UNZIP /* gzwrite */
107 /* Ethernet support */
108 #define CONFIG_FEC_MXC
109 #define IMX_FEC_BASE ENET_BASE_ADDR
110 #define CONFIG_FEC_XCV_TYPE RGMII
111 #define CONFIG_FEC_MXC_PHYADDR 0
112 #define CONFIG_ARP_TIMEOUT 200UL
115 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
116 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
117 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
118 #define CONFIG_MXC_USB_FLAGS 0
119 #define CONFIG_USBD_HS
120 #define CONFIG_NETCONSOLE
122 /* Framebuffer and LCD */
123 #define CONFIG_VIDEO_LOGO
124 #define CONFIG_IMX_HDMI
125 #define CONFIG_IMX_VIDEO_SKIP
126 #define CONFIG_VIDEO_BMP_LOGO
127 #define CONFIG_SPLASH_SCREEN_ALIGN
128 #define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
130 /* Miscellaneous configurable options */
131 #define CONFIG_HWCONFIG
133 /* Memory configuration */
135 /* Physical Memory Map */
136 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
137 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
138 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
139 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
141 #define CONFIG_SYS_INIT_SP_OFFSET \
142 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
143 #define CONFIG_SYS_INIT_SP_ADDR \
144 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
147 * MTD Command for mtdparts
150 /* Persistent Environment Config */
151 #if defined(CONFIG_ENV_IS_IN_MMC)
152 #define CONFIG_SYS_MMC_ENV_DEV 0
153 #define CONFIG_SYS_MMC_ENV_PART 1
157 #define CONFIG_IPADDR 192.168.1.1
158 #define CONFIG_SERVERIP 192.168.1.146
160 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
163 "usb_pgood_delay=2000\0" \
164 "console=ttymxc1\0" \
165 "bootdevs=usb mmc sata flash\0" \
166 "hwconfig=_UNKNOWN_\0" \
169 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
170 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
174 "fdt_high=0xffffffff\0" \
175 "fdt_addr=0x18000000\0" \
176 "initrd_high=0xffffffff\0" \
178 "fdt addr ${fdt_addr}\0" \
181 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
182 "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
184 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
185 "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
187 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
188 "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
193 "script=6x_bootscript-ventana\0" \
195 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
196 "source ${loadaddr}; " \
200 "mmc_root=mmcblk0p1\0" \
202 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
203 "mmc dev ${disk} && mmc rescan && " \
204 "setenv dtype mmc; run loadscript; " \
205 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
206 "setenv bootargs console=${console},${baudrate} " \
207 "root=/dev/${mmc_root} rootfstype=${fs} " \
208 "rootwait rw ${video} ${extra}; " \
209 "if run loadfdt; then " \
210 "bootm ${loadaddr} - ${fdt_addr}; " \
217 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
219 "setenv dtype sata; run loadscript; " \
220 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
221 "setenv bootargs console=${console},${baudrate} " \
222 "root=/dev/sda1 rootfstype=${fs} " \
223 "rootwait rw ${video} ${extra}; " \
224 "if run loadfdt; then " \
225 "bootm ${loadaddr} - ${fdt_addr}; " \
231 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
232 "usb start && usb dev ${disk} && " \
233 "setenv dtype usb; run loadscript; " \
234 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
235 "setenv bootargs console=${console},${baudrate} " \
236 "root=/dev/sda1 rootfstype=${fs} " \
237 "rootwait rw ${video} ${extra}; " \
238 "if run loadfdt; then " \
239 "bootm ${loadaddr} - ${fdt_addr}; " \
245 #ifdef CONFIG_SPI_FLASH
246 #define CONFIG_EXTRA_ENV_SETTINGS \
247 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
248 "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
249 "image_uboot=ventana/u-boot_spi.imx\0" \
251 "spi_koffset=0x90000\0" \
252 "spi_klen=0x200000\0" \
254 "spi_updateuboot=echo Updating uboot from " \
255 "${serverip}:${image_uboot}...; " \
256 "tftpboot ${loadaddr} ${image_uboot} && " \
257 "sf probe && sf erase 0 80000 && " \
258 "sf write ${loadaddr} 400 ${filesize}\0" \
259 "spi_update=echo Updating OS from ${serverip}:${image_os} " \
260 "to ${spi_koffset} ...; " \
261 "tftp ${loadaddr} ${image_os} && " \
263 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
267 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
268 "setenv bootargs console=${console},${baudrate} " \
269 "root=/dev/mtdblock3 " \
270 "rootfstype=squashfs,jffs2 " \
271 "${video} ${extra}; " \
275 #define CONFIG_EXTRA_ENV_SETTINGS \
276 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
278 "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
279 "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
280 "tftp ${loadaddr} ${image_rootfs} && " \
281 "nand erase.part rootfs && " \
282 "nand write ${loadaddr} rootfs ${filesize}\0" \
285 "setenv fsload 'ubifsload'; " \
286 "ubi part rootfs; " \
287 "if ubi check boot; then " \
288 "ubifsmount ubi0:boot; " \
289 "setenv root ubi0:rootfs ubi.mtd=2 " \
290 "rootfstype=squashfs,ubifs; " \
292 "elif ubi check rootfs; then " \
293 "ubifsmount ubi0:rootfs; " \
294 "setenv root ubi0:rootfs ubi.mtd=2 " \
295 "rootfstype=ubifs; " \
297 "setenv dtype nand; run loadscript; " \
298 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
299 "setenv bootargs console=${console},${baudrate} " \
300 "root=${root} ${video} ${extra}; " \
301 "if run loadfdt; then " \
303 "bootm ${loadaddr} - ${fdt_addr}; " \
305 "ubifsumount; bootm; " \
310 #define CONFIG_BOOTCOMMAND \
311 "for btype in ${bootdevs}; do " \
312 "echo; echo Attempting ${btype} boot...; " \
313 "if run ${btype}_boot; then; fi; " \
316 #endif /* __CONFIG_H */