include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 #define CONFIG_SPL_BOARD_INIT
  12 /* Location in NAND to read U-Boot from */
  13 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  14
  15 /* Falcon Mode */
  16 #define CONFIG_CMD_SPL
  17 #define CONFIG_SPL_OS_BOOT
  18 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  19 #define CONFIG_CMD_SPL_WRITE_SIZE       (128 * SZ_1K)
  20
  21 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  22 #define CONFIG_CMD_SPL_NAND_OFS         (17 * SZ_1M)
  23 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  24
  25 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  26 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  27 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  28 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  29
  30 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  31 #include "mx6_common.h"
  32 #define CONFIG_DISPLAY_BOARDINFO_LATE
  33
  34 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  35
  36 /* Serial ATAG */
  37 #define CONFIG_SERIAL_TAG
  38
  39 /* Size of malloc() pool */
  40 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  41
  42 /* Init Functions */
  43 #define CONFIG_BOARD_EARLY_INIT_F
  44 #define CONFIG_MISC_INIT_R
  45
  46 /* Driver Model */
  47 #ifndef CONFIG_SPL_BUILD
  48 #define CONFIG_DM_GPIO
  49 #define CONFIG_DM_THERMAL
  50 #endif
  51
  52 /* Thermal */
  53 #define CONFIG_IMX_THERMAL
  54
  55 /* Serial */
  56 #define CONFIG_MXC_UART
  57 #define CONFIG_MXC_UART_BASE           UART2_BASE
  58
  59 #ifdef CONFIG_SPI_FLASH
  60
  61 /* SPI */
  62 #ifdef CONFIG_CMD_SF
  63   #define CONFIG_MXC_SPI
  64   #define CONFIG_SPI_FLASH_MTD
  65   #define CONFIG_SPI_FLASH_BAR
  66   #define CONFIG_SF_DEFAULT_BUS              0
  67   #define CONFIG_SF_DEFAULT_CS               0
  68                                              /* GPIO 3-19 (21248) */
  69   #define CONFIG_SF_DEFAULT_SPEED            30000000
  70   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  71 #endif
  72
  73 #else
  74 /* Enable NAND support */
  75 #define CONFIG_CMD_NAND
  76 #define CONFIG_CMD_NAND_TRIMFFS
  77 #ifdef CONFIG_CMD_NAND
  78   #define CONFIG_NAND_MXS
  79   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  80   #define CONFIG_SYS_NAND_BASE          0x40000000
  81   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  82   #define CONFIG_SYS_NAND_ONFI_DETECTION
  83
  84   /* DMA stuff, needed for GPMI/MXS NAND support */
  85   #define CONFIG_APBH_DMA
  86   #define CONFIG_APBH_DMA_BURST
  87   #define CONFIG_APBH_DMA_BURST8
  88 #endif
  89
  90 #endif /* CONFIG_SPI_FLASH */
  91
  92 /* I2C Configs */
  93 #define CONFIG_SYS_I2C
  94 #define CONFIG_SYS_I2C_MXC
  95 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  96 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  97 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  98 #define CONFIG_SYS_I2C_SPEED            100000
  99 #define CONFIG_I2C_GSC                  0
 100 #define CONFIG_I2C_PMIC                 1
 101 #define CONFIG_I2C_EDID
 102
 103 /* MMC Configs */
 104 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 105 #define CONFIG_SYS_FSL_USDHC_NUM       1
 106
 107 /* Filesystem support */
 108 #define CONFIG_CMD_UBIFS
 109
 110 /*
 111  * SATA Configs
 112  */
 113 #define CONFIG_CMD_SATA
 114 #ifdef CONFIG_CMD_SATA
 115   #define CONFIG_DWC_AHSATA
 116   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 117   #define CONFIG_DWC_AHSATA_PORT_ID     0
 118   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 119   #define CONFIG_LBA48
 120   #define CONFIG_LIBATA
 121 #endif
 122
 123 /*
 124  * PCI express
 125  */
 126 #define CONFIG_CMD_PCI
 127 #ifdef CONFIG_CMD_PCI
 128 #define CONFIG_PCI
 129 #define CONFIG_PCI_PNP
 130 #define CONFIG_PCI_SCAN_SHOW
 131 #define CONFIG_PCI_FIXUP_DEV
 132 #define CONFIG_PCIE_IMX
 133 #endif
 134
 135 /*
 136  * PMIC
 137  */
 138 #define CONFIG_POWER
 139 #define CONFIG_POWER_I2C
 140 #define CONFIG_POWER_PFUZE100
 141 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 142 #define CONFIG_POWER_LTC3676
 143 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 144
 145 /* Various command support */
 146 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 147 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 148 #define CONFIG_CMD_GSC
 149 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 150 #define CONFIG_RBTREE
 151
 152 /* Ethernet support */
 153 #define CONFIG_FEC_MXC
 154 #define CONFIG_MII
 155 #define IMX_FEC_BASE             ENET_BASE_ADDR
 156 #define CONFIG_FEC_XCV_TYPE      RGMII
 157 #define CONFIG_FEC_MXC_PHYADDR   0
 158 #define CONFIG_PHYLIB
 159 #define CONFIG_ARP_TIMEOUT       200UL
 160
 161 /* USB Configs */
 162 #define CONFIG_USB_EHCI
 163 #define CONFIG_USB_EHCI_MX6
 164 #define CONFIG_USB_HOST_ETHER
 165 #define CONFIG_USB_ETHER_ASIX
 166 #define CONFIG_USB_ETHER_SMSC95XX
 167 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 168 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 169 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 170 #define CONFIG_MXC_USB_FLAGS      0
 171 #define CONFIG_USB_KEYBOARD
 172 #define CONFIG_USBD_HS
 173 #define CONFIG_USB_ETHER
 174 #define CONFIG_USB_ETH_CDC
 175 #define CONFIG_NETCONSOLE
 176 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 177
 178 /* USB Mass Storage Gadget */
 179 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 180
 181 /* Framebuffer and LCD */
 182 #define CONFIG_VIDEO
 183 #define CONFIG_VIDEO_IPUV3
 184 #define CONFIG_CFB_CONSOLE
 185 #define CONFIG_VGA_AS_SINGLE_DEVICE
 186 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 187 #define CONFIG_VIDEO_LOGO
 188 #define CONFIG_IPUV3_CLK          260000000
 189 #define CONFIG_CMD_HDMIDETECT
 190 #define CONFIG_CONSOLE_MUX
 191 #define CONFIG_IMX_HDMI
 192 #define CONFIG_IMX_VIDEO_SKIP
 193 #define CONFIG_VIDEO_BMP_LOGO
 194 #define CONFIG_SPLASH_SCREEN_ALIGN
 195 #define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */
 196
 197 /* Miscellaneous configurable options */
 198 #define CONFIG_HWCONFIG
 199 #define CONFIG_PREBOOT
 200
 201 /* Print Buffer Size */
 202 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 203
 204 /* Memory configuration */
 205 #define CONFIG_SYS_MEMTEST_START       0x10000000
 206 #define CONFIG_SYS_MEMTEST_END         0x10010000
 207 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 208
 209 /* Physical Memory Map */
 210 #define CONFIG_NR_DRAM_BANKS           1
 211 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 212 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 213 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 214 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 215
 216 #define CONFIG_SYS_INIT_SP_OFFSET \
 217         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 218 #define CONFIG_SYS_INIT_SP_ADDR \
 219         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 220
 221 /*
 222  * MTD Command for mtdparts
 223  */
 224 #define CONFIG_LZO
 225 #define CONFIG_CMD_MTDPARTS
 226 #define CONFIG_MTD_DEVICE
 227 #define CONFIG_MTD_PARTITIONS
 228 #ifdef CONFIG_SPI_FLASH
 229 #define MTDIDS_DEFAULT    "nor0=nor"
 230 #define MTDPARTS_DEFAULT  \
 231         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 232 #else
 233 #define MTDIDS_DEFAULT    "nand0=nand"
 234 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 235 #endif
 236
 237 /* Persistent Environment Config */
 238 #ifdef CONFIG_SPI_FLASH
 239 #define CONFIG_ENV_IS_IN_SPI_FLASH
 240 #else
 241 #define CONFIG_ENV_IS_IN_NAND
 242 #endif
 243 #if defined(CONFIG_ENV_IS_IN_MMC)
 244   #define CONFIG_SYS_MMC_ENV_DEV         0
 245   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 246   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 247   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 248 #elif defined(CONFIG_ENV_IS_IN_NAND)
 249   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 250   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 251   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 252   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 253   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 254 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 255   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 256   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 257   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 258   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 259   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 260   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 261   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 262 #endif
 263
 264 /* Environment */
 265 #define CONFIG_IPADDR             192.168.1.1
 266 #define CONFIG_SERVERIP           192.168.1.146
 267
 268 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 269         "pcidisable=1\0" \
 270         "splashpos=m,m\0" \
 271         "usb_pgood_delay=2000\0" \
 272         "console=ttymxc1\0" \
 273         "bootdevs=usb mmc sata flash\0" \
 274         "hwconfig=_UNKNOWN_\0" \
 275         "video=\0" \
 276         \
 277         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 278         "mtdids=" MTDIDS_DEFAULT "\0" \
 279         "disk=0\0" \
 280         "part=1\0" \
 281         \
 282         "fdt_high=0xffffffff\0" \
 283         "fdt_addr=0x18000000\0" \
 284         "initrd_high=0xffffffff\0" \
 285         "fixfdt=" \
 286                 "fdt addr ${fdt_addr}\0" \
 287         "bootdir=boot\0" \
 288         "loadfdt=" \
 289                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 290                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 291                         "run fixfdt; " \
 292                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 293                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 294                         "run fixfdt; " \
 295                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 296                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 297                         "run fixfdt; " \
 298                 "fi\0" \
 299         \
 300         "fs=ext4\0" \
 301         "script=6x_bootscript-ventana\0" \
 302         "loadscript=" \
 303                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 304                         "source ${loadaddr}; " \
 305                 "fi\0" \
 306         \
 307         "uimage=uImage\0" \
 308         "mmc_root=/dev/mmcblk0p1 rootfstype=${fs} rootwait rw\0" \
 309         "mmc_boot=" \
 310                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
 311                 "mmc dev ${disk} && mmc rescan && " \
 312                 "setenv dtype mmc; run loadscript; " \
 313                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 314                         "setenv bootargs console=${console},${baudrate} " \
 315                                 "root=/dev/mmcblk0p1 rootfstype=${fs} " \
 316                                 "rootwait rw ${video} ${extra}; " \
 317                         "if run loadfdt; then " \
 318                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 319                         "else " \
 320                                 "bootm; " \
 321                         "fi; " \
 322                 "fi\0" \
 323         \
 324         "sata_boot=" \
 325                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
 326                 "sata init && " \
 327                 "setenv dtype sata; run loadscript; " \
 328                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 329                         "setenv bootargs console=${console},${baudrate} " \
 330                                 "root=/dev/sda1 rootfstype=${fs} " \
 331                                 "rootwait rw ${video} ${extra}; " \
 332                         "if run loadfdt; then " \
 333                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 334                         "else " \
 335                                 "bootm; " \
 336                         "fi; " \
 337                 "fi\0" \
 338         "usb_boot=" \
 339                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
 340                 "usb start && usb dev ${disk} && " \
 341                 "setenv dtype usb; run loadscript; " \
 342                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 343                         "setenv bootargs console=${console},${baudrate} " \
 344                                 "root=/dev/sda1 rootfstype=${fs} " \
 345                                 "rootwait rw ${video} ${extra}; " \
 346                         "if run loadfdt; then " \
 347                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 348                         "else " \
 349                                 "bootm; " \
 350                         "fi; " \
 351                 "fi\0"
 352
 353 #ifdef CONFIG_SPI_FLASH
 354         #define CONFIG_EXTRA_ENV_SETTINGS \
 355         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 356         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 357         "image_uboot=ventana/u-boot_spi.imx\0" \
 358         \
 359         "spi_koffset=0x90000\0" \
 360         "spi_klen=0x200000\0" \
 361         \
 362         "spi_updateuboot=echo Updating uboot from " \
 363                 "${serverip}:${image_uboot}...; " \
 364                 "tftpboot ${loadaddr} ${image_uboot} && " \
 365                 "sf probe && sf erase 0 80000 && " \
 366                         "sf write ${loadaddr} 400 ${filesize}\0" \
 367         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 368                 "to ${spi_koffset} ...; " \
 369                 "tftp ${loadaddr} ${image_os} && " \
 370                 "sf probe && " \
 371                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 372         \
 373         "flash_boot=" \
 374                 "if sf probe && " \
 375                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 376                         "setenv bootargs console=${console},${baudrate} " \
 377                                 "root=/dev/mtdblock3 " \
 378                                 "rootfstype=squashfs,jffs2 " \
 379                                 "${video} ${extra}; " \
 380                         "bootm; " \
 381                 "fi\0"
 382 #else
 383         #define CONFIG_EXTRA_ENV_SETTINGS \
 384         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 385         \
 386         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 387         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 388                 "tftp ${loadaddr} ${image_rootfs} && " \
 389                 "nand erase.part rootfs && " \
 390                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 391         \
 392         "flash_boot=" \
 393                 "setenv fsload 'ubifsload'; " \
 394                 "ubi part rootfs; " \
 395                 "if ubi check boot; then " \
 396                         "ubifsmount ubi0:boot; " \
 397                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 398                                 "rootfstype=squashfs,ubifs; " \
 399                         "setenv bootdir; " \
 400                 "elif ubi check rootfs; then " \
 401                         "ubifsmount ubi0:rootfs; " \
 402                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 403                                 "rootfstype=ubifs; " \
 404                 "fi; " \
 405                 "setenv dtype nand; run loadscript; " \
 406                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 407                         "setenv bootargs console=${console},${baudrate} " \
 408                                 "root=${root} ${video} ${extra}; " \
 409                         "if run loadfdt; then " \
 410                                 "ubifsumount; " \
 411                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 412                         "else " \
 413                                 "ubifsumount; bootm; " \
 414                         "fi; " \
 415                 "fi\0"
 416 #endif
 417
 418 #define CONFIG_BOOTCOMMAND \
 419         "for btype in ${bootdevs}; do " \
 420                 "echo; echo Attempting ${btype} boot...; " \
 421                 "if run ${btype}_boot; then; fi; " \
 422         "done"
 423
 424 /* Device Tree Support */
 425 #define CONFIG_FDT_FIXUP_PARTITIONS
 426
 427 #endif                         /* __CONFIG_H */