include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 #define CONFIG_SPL_BOARD_INIT
  12 #define CONFIG_SPL_NAND_SUPPORT
  13 #define CONFIG_SPL_MMC_SUPPORT
  14 #define CONFIG_SPL_POWER_SUPPORT
  15 /* Location in NAND to read U-Boot from */
  16 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  17
  18 /* Falcon Mode */
  19 #define CONFIG_CMD_SPL
  20 #define CONFIG_SPL_OS_BOOT
  21 #define CONFIG_SPL_ENV_SUPPORT
  22 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  23 #define CONFIG_CMD_SPL_WRITE_SIZE       (128 * SZ_1K)
  24
  25 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  26 #define CONFIG_CMD_SPL_NAND_OFS         (17 * SZ_1M)
  27 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  28
  29 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  30 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  31 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  32 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  33
  34 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  35 #include "mx6_common.h"
  36
  37 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  38
  39 /* Serial ATAG */
  40 #define CONFIG_SERIAL_TAG
  41
  42 /* Size of malloc() pool */
  43 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  44
  45 /* Init Functions */
  46 #define CONFIG_BOARD_EARLY_INIT_F
  47 #define CONFIG_MISC_INIT_R
  48
  49 /* Driver Model */
  50 #ifndef CONFIG_SPL_BUILD
  51 #define CONFIG_DM_GPIO
  52 #define CONFIG_DM_THERMAL
  53 #endif
  54
  55 /* GPIO */
  56 #define CONFIG_MXC_GPIO
  57
  58 /* Thermal */
  59 #define CONFIG_IMX_THERMAL
  60
  61 /* Serial */
  62 #define CONFIG_MXC_UART
  63 #define CONFIG_MXC_UART_BASE           UART2_BASE
  64
  65 #ifdef CONFIG_SPI_FLASH
  66
  67 /* SPI */
  68 #define CONFIG_CMD_SF
  69 #ifdef CONFIG_CMD_SF
  70   #define CONFIG_MXC_SPI
  71   #define CONFIG_SPI_FLASH_MTD
  72   #define CONFIG_SPI_FLASH_BAR
  73   #define CONFIG_SF_DEFAULT_BUS              0
  74   #define CONFIG_SF_DEFAULT_CS               0
  75                                              /* GPIO 3-19 (21248) */
  76   #define CONFIG_SF_DEFAULT_SPEED            30000000
  77   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  78 #endif
  79
  80 #else
  81 /* Enable NAND support */
  82 #define CONFIG_CMD_TIME
  83 #define CONFIG_CMD_NAND
  84 #define CONFIG_CMD_NAND_TRIMFFS
  85 #ifdef CONFIG_CMD_NAND
  86   #define CONFIG_NAND_MXS
  87   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  88   #define CONFIG_SYS_NAND_BASE          0x40000000
  89   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  90   #define CONFIG_SYS_NAND_ONFI_DETECTION
  91
  92   /* DMA stuff, needed for GPMI/MXS NAND support */
  93   #define CONFIG_APBH_DMA
  94   #define CONFIG_APBH_DMA_BURST
  95   #define CONFIG_APBH_DMA_BURST8
  96 #endif
  97
  98 #endif /* CONFIG_SPI_FLASH */
  99
 100 /* I2C Configs */
 101 #define CONFIG_CMD_I2C
 102 #define CONFIG_SYS_I2C
 103 #define CONFIG_SYS_I2C_MXC
 104 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 105 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 106 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 107 #define CONFIG_SYS_I2C_SPEED            100000
 108 #define CONFIG_I2C_GSC                  0
 109 #define CONFIG_I2C_PMIC                 1
 110 #define CONFIG_I2C_EDID
 111
 112 /* MMC Configs */
 113 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 114 #define CONFIG_SYS_FSL_USDHC_NUM       1
 115
 116 /* Filesystem support */
 117 #define CONFIG_CMD_UBIFS
 118
 119 /*
 120  * SATA Configs
 121  */
 122 #define CONFIG_CMD_SATA
 123 #ifdef CONFIG_CMD_SATA
 124   #define CONFIG_DWC_AHSATA
 125   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 126   #define CONFIG_DWC_AHSATA_PORT_ID     0
 127   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 128   #define CONFIG_LBA48
 129   #define CONFIG_LIBATA
 130 #endif
 131
 132 /*
 133  * PCI express
 134  */
 135 #define CONFIG_CMD_PCI
 136 #ifdef CONFIG_CMD_PCI
 137 #define CONFIG_PCI
 138 #define CONFIG_PCI_PNP
 139 #define CONFIG_PCI_SCAN_SHOW
 140 #define CONFIG_PCI_FIXUP_DEV
 141 #define CONFIG_PCIE_IMX
 142 #endif
 143
 144 /*
 145  * PMIC
 146  */
 147 #define CONFIG_POWER
 148 #define CONFIG_POWER_I2C
 149 #define CONFIG_POWER_PFUZE100
 150 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 151 #define CONFIG_POWER_LTC3676
 152 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 153
 154 /* Various command support */
 155 #define CONFIG_CMD_PING
 156 #define CONFIG_CMD_DHCP
 157 #define CONFIG_CMD_MII
 158 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 159 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 160 #define CONFIG_CMD_GSC
 161 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 162 #define CONFIG_CMD_UBI
 163 #define CONFIG_RBTREE
 164
 165 /* Ethernet support */
 166 #define CONFIG_FEC_MXC
 167 #define CONFIG_MII
 168 #define IMX_FEC_BASE             ENET_BASE_ADDR
 169 #define CONFIG_FEC_XCV_TYPE      RGMII
 170 #define CONFIG_FEC_MXC_PHYADDR   0
 171 #define CONFIG_PHYLIB
 172 #define CONFIG_ARP_TIMEOUT       200UL
 173
 174 /* USB Configs */
 175 #define CONFIG_CMD_USB
 176 #define CONFIG_USB_EHCI
 177 #define CONFIG_USB_EHCI_MX6
 178 #define CONFIG_USB_STORAGE
 179 #define CONFIG_USB_HOST_ETHER
 180 #define CONFIG_USB_ETHER_ASIX
 181 #define CONFIG_USB_ETHER_SMSC95XX
 182 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 183 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 184 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 185 #define CONFIG_MXC_USB_FLAGS      0
 186 #define CONFIG_USB_KEYBOARD
 187 #define CONFIG_USBD_HS
 188 #define CONFIG_USB_ETHER
 189 #define CONFIG_USB_ETH_CDC
 190 #define CONFIG_NETCONSOLE
 191 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 192
 193 /* USB Mass Storage Gadget */
 194 #define CONFIG_CMD_USB_MASS_STORAGE
 195 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 196
 197 /* Netchip IDs */
 198 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
 199 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
 200 #define CONFIG_G_DNL_MANUFACTURER "Gateworks"
 201
 202 /* Framebuffer and LCD */
 203 #define CONFIG_VIDEO
 204 #define CONFIG_VIDEO_IPUV3
 205 #define CONFIG_CFB_CONSOLE
 206 #define CONFIG_VGA_AS_SINGLE_DEVICE
 207 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 208 #define CONFIG_VIDEO_BMP_RLE8
 209 #define CONFIG_SPLASH_SCREEN
 210 #define CONFIG_BMP_16BPP
 211 #define CONFIG_VIDEO_LOGO
 212 #define CONFIG_IPUV3_CLK          260000000
 213 #define CONFIG_CMD_HDMIDETECT
 214 #define CONFIG_CONSOLE_MUX
 215 #define CONFIG_IMX_HDMI
 216 #define CONFIG_IMX_VIDEO_SKIP
 217
 218 /* Miscellaneous configurable options */
 219 #define CONFIG_HWCONFIG
 220
 221 /* Print Buffer Size */
 222 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 223
 224 /* Memory configuration */
 225 #define CONFIG_SYS_MEMTEST_START       0x10000000
 226 #define CONFIG_SYS_MEMTEST_END         0x10010000
 227 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 228
 229 /* Physical Memory Map */
 230 #define CONFIG_NR_DRAM_BANKS           1
 231 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 232 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 233 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 234 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 235
 236 #define CONFIG_SYS_INIT_SP_OFFSET \
 237         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 238 #define CONFIG_SYS_INIT_SP_ADDR \
 239         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 240
 241 /*
 242  * MTD Command for mtdparts
 243  */
 244 #define CONFIG_LZO
 245 #define CONFIG_CMD_MTDPARTS
 246 #define CONFIG_MTD_DEVICE
 247 #define CONFIG_MTD_PARTITIONS
 248 #ifdef CONFIG_SPI_FLASH
 249 #define MTDIDS_DEFAULT    "nor0=nor"
 250 #define MTDPARTS_DEFAULT  \
 251         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 252 #else
 253 #define MTDIDS_DEFAULT    "nand0=nand"
 254 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 255 #endif
 256
 257 /* Persistent Environment Config */
 258 #ifdef CONFIG_SPI_FLASH
 259 #define CONFIG_ENV_IS_IN_SPI_FLASH
 260 #else
 261 #define CONFIG_ENV_IS_IN_NAND
 262 #endif
 263 #if defined(CONFIG_ENV_IS_IN_MMC)
 264   #define CONFIG_SYS_MMC_ENV_DEV         0
 265   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 266   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 267   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 268 #elif defined(CONFIG_ENV_IS_IN_NAND)
 269   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 270   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 271   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 272   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 273   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 274 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 275   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 276   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 277   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 278   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 279   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 280   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 281   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 282 #endif
 283
 284 /* Environment */
 285 #define CONFIG_IPADDR             192.168.1.1
 286 #define CONFIG_SERVERIP           192.168.1.146
 287 #define HWCONFIG_DEFAULT \
 288         "hwconfig=rs232;" \
 289         "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
 290
 291 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 292         "usb_pgood_delay=2000\0" \
 293         "console=ttymxc1\0" \
 294         "bootdevs=usb mmc sata flash\0" \
 295         HWCONFIG_DEFAULT \
 296         "video=\0" \
 297         \
 298         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 299         "mtdids=" MTDIDS_DEFAULT "\0" \
 300         \
 301         "fdt_high=0xffffffff\0" \
 302         "fdt_addr=0x18000000\0" \
 303         "initrd_high=0xffffffff\0" \
 304         "bootdir=boot\0" \
 305         "loadfdt=" \
 306                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 307                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 308                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 309                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 310                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 311                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 312                 "fi\0" \
 313         \
 314         "script=6x_bootscript-ventana\0" \
 315         "loadscript=" \
 316                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 317                         "source; " \
 318                 "fi\0" \
 319         \
 320         "uimage=uImage\0" \
 321         "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
 322         "mmc_boot=" \
 323                 "setenv fsload 'ext2load mmc 0:1'; " \
 324                 "mmc dev 0 && mmc rescan && " \
 325                 "setenv dtype mmc; run loadscript; " \
 326                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 327                         "setenv bootargs console=${console},${baudrate} " \
 328                                 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
 329                                 "rootwait rw ${video} ${extra}; " \
 330                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 331                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 332                         "else " \
 333                                 "bootm; " \
 334                         "fi; " \
 335                 "fi\0" \
 336         \
 337         "sata_boot=" \
 338                 "setenv fsload 'ext2load sata 0:1'; sata init && " \
 339                 "setenv dtype sata; run loadscript; " \
 340                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 341                         "setenv bootargs console=${console},${baudrate} " \
 342                                 "root=/dev/sda1 rootfstype=ext4 " \
 343                                 "rootwait rw ${video} ${extra}; " \
 344                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 345                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 346                         "else " \
 347                                 "bootm; " \
 348                         "fi; " \
 349                 "fi\0" \
 350         "usb_boot=" \
 351                 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
 352                 "setenv dtype usb; run loadscript; " \
 353                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 354                         "setenv bootargs console=${console},${baudrate} " \
 355                                 "root=/dev/sda1 rootfstype=ext4 " \
 356                                 "rootwait rw ${video} ${extra}; " \
 357                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 358                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 359                         "else " \
 360                                 "bootm; " \
 361                         "fi; " \
 362                 "fi\0"
 363
 364 #ifdef CONFIG_SPI_FLASH
 365         #define CONFIG_EXTRA_ENV_SETTINGS \
 366         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 367         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 368         "image_uboot=ventana/u-boot_spi.imx\0" \
 369         \
 370         "spi_koffset=0x90000\0" \
 371         "spi_klen=0x200000\0" \
 372         \
 373         "spi_updateuboot=echo Updating uboot from " \
 374                 "${serverip}:${image_uboot}...; " \
 375                 "tftpboot ${loadaddr} ${image_uboot} && " \
 376                 "sf probe && sf erase 0 80000 && " \
 377                         "sf write ${loadaddr} 400 ${filesize}\0" \
 378         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 379                 "to ${spi_koffset} ...; " \
 380                 "tftp ${loadaddr} ${image_os} && " \
 381                 "sf probe && " \
 382                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 383         \
 384         "flash_boot=" \
 385                 "if sf probe && " \
 386                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 387                         "setenv bootargs console=${console},${baudrate} " \
 388                                 "root=/dev/mtdblock3 " \
 389                                 "rootfstype=squashfs,jffs2 " \
 390                                 "${video} ${extra}; " \
 391                         "bootm; " \
 392                 "fi\0"
 393 #else
 394         #define CONFIG_EXTRA_ENV_SETTINGS \
 395         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 396         \
 397         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 398         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 399                 "tftp ${loadaddr} ${image_rootfs} && " \
 400                 "nand erase.part rootfs && " \
 401                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 402         \
 403         "flash_boot=" \
 404                 "setenv fsload 'ubifsload'; " \
 405                 "ubi part rootfs; " \
 406                 "if ubi check boot; then " \
 407                         "ubifsmount ubi0:boot; " \
 408                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 409                                 "rootfstype=squashfs,ubifs; " \
 410                         "setenv bootdir; " \
 411                 "elif ubi check rootfs; then " \
 412                         "ubifsmount ubi0:rootfs; " \
 413                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 414                                 "rootfstype=ubifs; " \
 415                 "fi; " \
 416                 "setenv dtype nand; run loadscript; " \
 417                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 418                         "setenv bootargs console=${console},${baudrate} " \
 419                                 "root=${root} ${video} ${extra}; " \
 420                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 421                                 "ubifsumount; " \
 422                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 423                         "else " \
 424                                 "ubifsumount; bootm; " \
 425                         "fi; " \
 426                 "fi\0"
 427 #endif
 428
 429 #define CONFIG_BOOTCOMMAND \
 430         "for btype in ${bootdevs}; do " \
 431                 "echo; echo Attempting ${btype} boot...; " \
 432                 "if run ${btype}_boot; then; fi; " \
 433         "done"
 434
 435 /* Device Tree Support */
 436 #define CONFIG_FDT_FIXUP_PARTITIONS
 437
 438 #endif                         /* __CONFIG_H */