1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2013 Gateworks Corporation
10 /* Location in NAND to read U-Boot from */
11 #define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M)
14 #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
16 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
17 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
19 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
20 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
21 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
22 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
24 #include "imx6_spl.h" /* common IMX6 SPL configuration */
25 #include "mx6_common.h"
27 #define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
30 #define CONFIG_SERIAL_TAG
32 /* Size of malloc() pool */
33 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
38 #ifndef CONFIG_SPL_BUILD
39 #define CONFIG_DM_THERMAL
43 #define CONFIG_IMX_THERMAL
46 #define CONFIG_MXC_UART_BASE UART2_BASE
48 #if !defined(CONFIG_SPI_FLASH) && defined(CONFIG_SPL_NAND_SUPPORT)
49 /* Enable NAND support */
50 #ifdef CONFIG_CMD_NAND
51 #define CONFIG_SYS_MAX_NAND_DEVICE 1
52 #define CONFIG_SYS_NAND_BASE 0x40000000
53 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
54 #define CONFIG_SYS_NAND_ONFI_DETECTION
56 /* DMA stuff, needed for GPMI/MXS NAND support */
59 #endif /* CONFIG_SPI_FLASH */
62 #define CONFIG_SYS_I2C
63 #define CONFIG_SYS_I2C_MXC
64 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
65 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
66 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
67 #define CONFIG_SYS_I2C_SPEED 100000
68 #define CONFIG_I2C_GSC 0
69 #define CONFIG_I2C_EDID
72 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
77 #ifdef CONFIG_CMD_SATA
78 #define CONFIG_SYS_SATA_MAX_DEVICE 1
79 #define CONFIG_DWC_AHSATA_PORT_ID 0
80 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
88 #define CONFIG_PCI_SCAN_SHOW
89 #define CONFIG_PCI_FIXUP_DEV
90 #define CONFIG_PCIE_IMX
97 #define CONFIG_POWER_I2C
98 #define CONFIG_POWER_PFUZE100
99 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
100 #define CONFIG_POWER_LTC3676
101 #define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
103 /* Various command support */
105 /* Ethernet support */
106 #define CONFIG_FEC_MXC
107 #define IMX_FEC_BASE ENET_BASE_ADDR
108 #define CONFIG_FEC_XCV_TYPE RGMII
109 #define CONFIG_FEC_MXC_PHYADDR 0
110 #define CONFIG_ARP_TIMEOUT 200UL
113 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
114 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
115 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
116 #define CONFIG_MXC_USB_FLAGS 0
117 #define CONFIG_USBD_HS
119 /* Framebuffer and LCD */
120 #define CONFIG_VIDEO_LOGO
121 #define CONFIG_IMX_HDMI
122 #define CONFIG_IMX_VIDEO_SKIP
123 #define CONFIG_VIDEO_BMP_LOGO
124 #define CONFIG_SPLASH_SCREEN_ALIGN
125 #define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
127 /* Miscellaneous configurable options */
128 #define CONFIG_HWCONFIG
130 /* Memory configuration */
132 /* Physical Memory Map */
133 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
134 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
135 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
136 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
138 #define CONFIG_SYS_INIT_SP_OFFSET \
139 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
140 #define CONFIG_SYS_INIT_SP_ADDR \
141 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
144 * MTD Command for mtdparts
147 /* Persistent Environment Config */
150 #define CONFIG_IPADDR 192.168.1.1
151 #define CONFIG_SERVERIP 192.168.1.146
153 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
156 "usb_pgood_delay=2000\0" \
157 "console=ttymxc1\0" \
158 "bootdevs=usb mmc sata flash\0" \
159 "hwconfig=_UNKNOWN_\0" \
162 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
163 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
167 "fdt_high=0xffffffff\0" \
168 "fdt_addr=0x18000000\0" \
169 "initrd_high=0xffffffff\0" \
171 "fdt addr ${fdt_addr}\0" \
174 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
175 "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
177 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
178 "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
180 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
181 "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
186 "script=6x_bootscript-ventana\0" \
188 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
189 "source ${loadaddr}; " \
193 "mmc_root=mmcblk0p1\0" \
195 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
196 "mmc dev ${disk} && mmc rescan && " \
197 "setenv dtype mmc; run loadscript; " \
198 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
199 "setenv bootargs console=${console},${baudrate} " \
200 "root=/dev/${mmc_root} rootfstype=${fs} " \
201 "rootwait rw ${video} ${extra}; " \
202 "if run loadfdt; then " \
203 "bootm ${loadaddr} - ${fdt_addr}; " \
210 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
212 "setenv dtype sata; run loadscript; " \
213 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
214 "setenv bootargs console=${console},${baudrate} " \
215 "root=/dev/sda1 rootfstype=${fs} " \
216 "rootwait rw ${video} ${extra}; " \
217 "if run loadfdt; then " \
218 "bootm ${loadaddr} - ${fdt_addr}; " \
224 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
225 "usb start && usb dev ${disk} && " \
226 "setenv dtype usb; run loadscript; " \
227 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
228 "setenv bootargs console=${console},${baudrate} " \
229 "root=/dev/sda1 rootfstype=${fs} " \
230 "rootwait rw ${video} ${extra}; " \
231 "if run loadfdt; then " \
232 "bootm ${loadaddr} - ${fdt_addr}; " \
238 #ifdef CONFIG_SPI_FLASH
239 #define CONFIG_EXTRA_ENV_SETTINGS \
240 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
241 "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
242 "image_uboot=ventana/u-boot_spi.imx\0" \
244 "spi_koffset=0x90000\0" \
245 "spi_klen=0x200000\0" \
247 "spi_updateuboot=echo Updating uboot from " \
248 "${serverip}:${image_uboot}...; " \
249 "tftpboot ${loadaddr} ${image_uboot} && " \
250 "sf probe && sf erase 0 80000 && " \
251 "sf write ${loadaddr} 400 ${filesize}\0" \
252 "spi_update=echo Updating OS from ${serverip}:${image_os} " \
253 "to ${spi_koffset} ...; " \
254 "tftp ${loadaddr} ${image_os} && " \
256 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
260 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
261 "setenv bootargs console=${console},${baudrate} " \
262 "root=/dev/mtdblock3 " \
263 "rootfstype=squashfs,jffs2 " \
264 "${video} ${extra}; " \
268 #define CONFIG_EXTRA_ENV_SETTINGS \
269 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
271 "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
272 "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
273 "tftp ${loadaddr} ${image_rootfs} && " \
274 "nand erase.part rootfs && " \
275 "nand write ${loadaddr} rootfs ${filesize}\0" \
278 "setenv fsload 'ubifsload'; " \
279 "ubi part rootfs; " \
280 "if ubi check boot; then " \
281 "ubifsmount ubi0:boot; " \
282 "setenv root ubi0:rootfs ubi.mtd=2 " \
283 "rootfstype=squashfs,ubifs; " \
285 "elif ubi check rootfs; then " \
286 "ubifsmount ubi0:rootfs; " \
287 "setenv root ubi0:rootfs ubi.mtd=2 " \
288 "rootfstype=ubifs; " \
290 "setenv dtype nand; run loadscript; " \
291 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
292 "setenv bootargs console=${console},${baudrate} " \
293 "root=${root} ${video} ${extra}; " \
294 "if run loadfdt; then " \
296 "bootm ${loadaddr} - ${fdt_addr}; " \
298 "ubifsumount; bootm; " \
303 #define CONFIG_BOOTCOMMAND \
304 "for btype in ${bootdevs}; do " \
305 "echo; echo Attempting ${btype} boot...; " \
306 "if run ${btype}_boot; then; fi; " \
309 #endif /* __CONFIG_H */