include/configs/gw_ventana.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Gateworks Corporation
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 /* SPL */
  10 /* Location in NAND to read U-Boot from */
  11 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  12
  13 /* Falcon Mode */
  14 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  15
  16 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  17 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  18
  19 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  20 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  21 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  22 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  23
  24 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  25 #include "mx6_common.h"
  26
  27 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  28
  29 /* Serial ATAG */
  30 #define CONFIG_SERIAL_TAG
  31
  32 /* Size of malloc() pool */
  33 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  34
  35 /* Init Functions */
  36
  37 /* Driver Model */
  38 #ifndef CONFIG_SPL_BUILD
  39 #define CONFIG_DM_THERMAL
  40 #endif
  41
  42 /* Thermal */
  43 #define CONFIG_IMX_THERMAL
  44
  45 /* Serial */
  46 #define CONFIG_MXC_UART
  47 #define CONFIG_MXC_UART_BASE           UART2_BASE
  48
  49 #if !defined(CONFIG_SPI_FLASH) && defined(CONFIG_SPL_NAND_SUPPORT)
  50 /* Enable NAND support */
  51 #ifdef CONFIG_CMD_NAND
  52   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  53   #define CONFIG_SYS_NAND_BASE          0x40000000
  54   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  55   #define CONFIG_SYS_NAND_ONFI_DETECTION
  56
  57   /* DMA stuff, needed for GPMI/MXS NAND support */
  58 #endif
  59
  60 #endif /* CONFIG_SPI_FLASH */
  61
  62 /* I2C Configs */
  63 #define CONFIG_SYS_I2C
  64 #define CONFIG_SYS_I2C_MXC
  65 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  66 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  67 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  68 #define CONFIG_SYS_I2C_SPEED            100000
  69 #define CONFIG_I2C_GSC                  0
  70 #define CONFIG_I2C_EDID
  71
  72 /* MMC Configs */
  73 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  74
  75 /*
  76  * SATA Configs
  77  */
  78 #ifdef CONFIG_CMD_SATA
  79   #define CONFIG_SYS_SATA_MAX_DEVICE    1
  80   #define CONFIG_DWC_AHSATA_PORT_ID     0
  81   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
  82   #define CONFIG_LBA48
  83 #endif
  84
  85 /*
  86  * PCI express
  87  */
  88 #ifdef CONFIG_CMD_PCI
  89 #define CONFIG_PCI_SCAN_SHOW
  90 #define CONFIG_PCI_FIXUP_DEV
  91 #define CONFIG_PCIE_IMX
  92 #endif
  93
  94 /*
  95  * PMIC
  96  */
  97 #define CONFIG_POWER
  98 #define CONFIG_POWER_I2C
  99 #define CONFIG_POWER_PFUZE100
 100 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 101 #define CONFIG_POWER_LTC3676
 102 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 103
 104 /* Various command support */
 105 #define CONFIG_CMD_UNZIP         /* gzwrite */
 106
 107 /* Ethernet support */
 108 #define CONFIG_FEC_MXC
 109 #define IMX_FEC_BASE             ENET_BASE_ADDR
 110 #define CONFIG_FEC_XCV_TYPE      RGMII
 111 #define CONFIG_FEC_MXC_PHYADDR   0
 112 #define CONFIG_ARP_TIMEOUT       200UL
 113
 114 /* USB Configs */
 115 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 116 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 117 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 118 #define CONFIG_MXC_USB_FLAGS      0
 119 #define CONFIG_USBD_HS
 120 #define CONFIG_NETCONSOLE
 121
 122 /* Framebuffer and LCD */
 123 #define CONFIG_VIDEO_LOGO
 124 #define CONFIG_IMX_HDMI
 125 #define CONFIG_IMX_VIDEO_SKIP
 126 #define CONFIG_VIDEO_BMP_LOGO
 127 #define CONFIG_SPLASH_SCREEN_ALIGN
 128 #define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */
 129
 130 /* Miscellaneous configurable options */
 131 #define CONFIG_HWCONFIG
 132
 133 /* Memory configuration */
 134 #define CONFIG_SYS_MEMTEST_START       0x10000000
 135 #define CONFIG_SYS_MEMTEST_END         0x10010000
 136 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 137
 138 /* Physical Memory Map */
 139 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 140 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 141 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 142 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 143
 144 #define CONFIG_SYS_INIT_SP_OFFSET \
 145         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 146 #define CONFIG_SYS_INIT_SP_ADDR \
 147         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 148
 149 /*
 150  * MTD Command for mtdparts
 151  */
 152
 153 /* Persistent Environment Config */
 154 #if defined(CONFIG_ENV_IS_IN_MMC)
 155   #define CONFIG_SYS_MMC_ENV_DEV         0
 156   #define CONFIG_SYS_MMC_ENV_PART        1
 157 #endif
 158
 159 /* Environment */
 160 #define CONFIG_IPADDR             192.168.1.1
 161 #define CONFIG_SERVERIP           192.168.1.146
 162
 163 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 164         "pcidisable=1\0" \
 165         "splashpos=m,m\0" \
 166         "usb_pgood_delay=2000\0" \
 167         "console=ttymxc1\0" \
 168         "bootdevs=usb mmc sata flash\0" \
 169         "hwconfig=_UNKNOWN_\0" \
 170         "video=\0" \
 171         \
 172         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 173         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 174         "disk=0\0" \
 175         "part=1\0" \
 176         \
 177         "fdt_high=0xffffffff\0" \
 178         "fdt_addr=0x18000000\0" \
 179         "initrd_high=0xffffffff\0" \
 180         "fixfdt=" \
 181                 "fdt addr ${fdt_addr}\0" \
 182         "bootdir=boot\0" \
 183         "loadfdt=" \
 184                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 185                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 186                         "run fixfdt; " \
 187                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 188                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 189                         "run fixfdt; " \
 190                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 191                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 192                         "run fixfdt; " \
 193                 "fi\0" \
 194         \
 195         "fs=ext4\0" \
 196         "script=6x_bootscript-ventana\0" \
 197         "loadscript=" \
 198                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 199                         "source ${loadaddr}; " \
 200                 "fi\0" \
 201         \
 202         "uimage=uImage\0" \
 203         "mmc_root=mmcblk0p1\0" \
 204         "mmc_boot=" \
 205                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
 206                 "mmc dev ${disk} && mmc rescan && " \
 207                 "setenv dtype mmc; run loadscript; " \
 208                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 209                         "setenv bootargs console=${console},${baudrate} " \
 210                                 "root=/dev/${mmc_root} rootfstype=${fs} " \
 211                                 "rootwait rw ${video} ${extra}; " \
 212                         "if run loadfdt; then " \
 213                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 214                         "else " \
 215                                 "bootm; " \
 216                         "fi; " \
 217                 "fi\0" \
 218         \
 219         "sata_boot=" \
 220                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
 221                 "sata init && " \
 222                 "setenv dtype sata; run loadscript; " \
 223                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 224                         "setenv bootargs console=${console},${baudrate} " \
 225                                 "root=/dev/sda1 rootfstype=${fs} " \
 226                                 "rootwait rw ${video} ${extra}; " \
 227                         "if run loadfdt; then " \
 228                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 229                         "else " \
 230                                 "bootm; " \
 231                         "fi; " \
 232                 "fi\0" \
 233         "usb_boot=" \
 234                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
 235                 "usb start && usb dev ${disk} && " \
 236                 "setenv dtype usb; run loadscript; " \
 237                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 238                         "setenv bootargs console=${console},${baudrate} " \
 239                                 "root=/dev/sda1 rootfstype=${fs} " \
 240                                 "rootwait rw ${video} ${extra}; " \
 241                         "if run loadfdt; then " \
 242                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 243                         "else " \
 244                                 "bootm; " \
 245                         "fi; " \
 246                 "fi\0"
 247
 248 #ifdef CONFIG_SPI_FLASH
 249         #define CONFIG_EXTRA_ENV_SETTINGS \
 250         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 251         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 252         "image_uboot=ventana/u-boot_spi.imx\0" \
 253         \
 254         "spi_koffset=0x90000\0" \
 255         "spi_klen=0x200000\0" \
 256         \
 257         "spi_updateuboot=echo Updating uboot from " \
 258                 "${serverip}:${image_uboot}...; " \
 259                 "tftpboot ${loadaddr} ${image_uboot} && " \
 260                 "sf probe && sf erase 0 80000 && " \
 261                         "sf write ${loadaddr} 400 ${filesize}\0" \
 262         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 263                 "to ${spi_koffset} ...; " \
 264                 "tftp ${loadaddr} ${image_os} && " \
 265                 "sf probe && " \
 266                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 267         \
 268         "flash_boot=" \
 269                 "if sf probe && " \
 270                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 271                         "setenv bootargs console=${console},${baudrate} " \
 272                                 "root=/dev/mtdblock3 " \
 273                                 "rootfstype=squashfs,jffs2 " \
 274                                 "${video} ${extra}; " \
 275                         "bootm; " \
 276                 "fi\0"
 277 #else
 278         #define CONFIG_EXTRA_ENV_SETTINGS \
 279         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 280         \
 281         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 282         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 283                 "tftp ${loadaddr} ${image_rootfs} && " \
 284                 "nand erase.part rootfs && " \
 285                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 286         \
 287         "flash_boot=" \
 288                 "setenv fsload 'ubifsload'; " \
 289                 "ubi part rootfs; " \
 290                 "if ubi check boot; then " \
 291                         "ubifsmount ubi0:boot; " \
 292                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 293                                 "rootfstype=squashfs,ubifs; " \
 294                         "setenv bootdir; " \
 295                 "elif ubi check rootfs; then " \
 296                         "ubifsmount ubi0:rootfs; " \
 297                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 298                                 "rootfstype=ubifs; " \
 299                 "fi; " \
 300                 "setenv dtype nand; run loadscript; " \
 301                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 302                         "setenv bootargs console=${console},${baudrate} " \
 303                                 "root=${root} ${video} ${extra}; " \
 304                         "if run loadfdt; then " \
 305                                 "ubifsumount; " \
 306                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 307                         "else " \
 308                                 "ubifsumount; bootm; " \
 309                         "fi; " \
 310                 "fi\0"
 311 #endif
 312
 313 #define CONFIG_BOOTCOMMAND \
 314         "for btype in ${bootdevs}; do " \
 315                 "echo; echo Attempting ${btype} boot...; " \
 316                 "if run ${btype}_boot; then; fi; " \
 317         "done"
 318
 319 #endif                         /* __CONFIG_H */