include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 #define CONFIG_SPL_NAND_SUPPORT
  12 #define CONFIG_SPL_MMC_SUPPORT
  13 #define CONFIG_SPL_FAT_SUPPORT
  14 /*
  15 #define CONFIG_SPL_SATA_SUPPORT
  16 */
  17 /* Location in NAND to read U-Boot from */
  18 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)
  19
  20 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  21 #include "mx6_common.h"
  22 #define CONFIG_MX6
  23 #define CONFIG_DISPLAY_CPUINFO         /* display cpu info */
  24 #define CONFIG_DISPLAY_BOARDINFO_LATE  /* display board info (after reloc) */
  25
  26 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  27
  28 #include <asm/arch/imx-regs.h>
  29 #include <asm/imx-common/gpio.h>
  30
  31 /* ATAGs */
  32 #define CONFIG_CMDLINE_TAG
  33 #define CONFIG_SETUP_MEMORY_TAGS
  34 #define CONFIG_INITRD_TAG
  35 #define CONFIG_SERIAL_TAG
  36 #define CONFIG_REVISION_TAG
  37
  38 #define CONFIG_SYS_GENERIC_BOARD
  39
  40 /* Size of malloc() pool */
  41 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  42
  43 /* Init Functions */
  44 #define CONFIG_BOARD_EARLY_INIT_F
  45 #define CONFIG_MISC_INIT_R
  46
  47 /* GPIO */
  48 #define CONFIG_MXC_GPIO
  49
  50 /* Serial */
  51 #define CONFIG_MXC_UART
  52 #define CONFIG_MXC_UART_BASE           UART2_BASE
  53
  54 #ifdef CONFIG_SPI_FLASH
  55
  56 /* SPI */
  57 #define CONFIG_CMD_SF
  58 #ifdef CONFIG_CMD_SF
  59   #define CONFIG_MXC_SPI
  60   #define CONFIG_SPI_FLASH_MTD
  61   #define CONFIG_SPI_FLASH_BAR
  62   #define CONFIG_SPI_FLASH_WINBOND
  63   #define CONFIG_SF_DEFAULT_BUS              0
  64   #define CONFIG_SF_DEFAULT_CS               0
  65                                              /* GPIO 3-19 (21248) */
  66   #define CONFIG_SF_DEFAULT_SPEED            30000000
  67   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  68 #endif
  69
  70 #else
  71 /* Enable NAND support */
  72 #define CONFIG_CMD_TIME
  73 #define CONFIG_CMD_NAND
  74 #define CONFIG_CMD_NAND_TRIMFFS
  75 #ifdef CONFIG_CMD_NAND
  76   #define CONFIG_NAND_MXS
  77   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  78   #define CONFIG_SYS_NAND_BASE          0x40000000
  79   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  80   #define CONFIG_SYS_NAND_ONFI_DETECTION
  81
  82   /* DMA stuff, needed for GPMI/MXS NAND support */
  83   #define CONFIG_APBH_DMA
  84   #define CONFIG_APBH_DMA_BURST
  85   #define CONFIG_APBH_DMA_BURST8
  86 #endif
  87
  88 #endif /* CONFIG_SPI_FLASH */
  89
  90 /* Flattened Image Tree Suport */
  91 #define CONFIG_FIT
  92 #define CONFIG_FIT_VERBOSE
  93
  94 /* I2C Configs */
  95 #define CONFIG_CMD_I2C
  96 #define CONFIG_SYS_I2C
  97 #define CONFIG_SYS_I2C_MXC
  98 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  99 #define CONFIG_SYS_I2C_SPEED            100000
 100 #define CONFIG_I2C_GSC                  0
 101 #define CONFIG_I2C_PMIC                 1
 102 #define CONFIG_I2C_EDID
 103
 104 /* MMC Configs */
 105 #define CONFIG_FSL_ESDHC
 106 #define CONFIG_FSL_USDHC
 107 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 108 #define CONFIG_SYS_FSL_USDHC_NUM       1
 109 #define CONFIG_MMC
 110 #define CONFIG_CMD_MMC
 111 #define CONFIG_GENERIC_MMC
 112 #define CONFIG_BOUNCE_BUFFER
 113
 114 /* Filesystem support */
 115 #define CONFIG_CMD_EXT2
 116 #define CONFIG_CMD_EXT4
 117 #define CONFIG_CMD_EXT4_WRITE
 118 #define CONFIG_CMD_FAT
 119 #define CONFIG_CMD_UBIFS
 120 #define CONFIG_DOS_PARTITION
 121
 122 /*
 123  * SATA Configs
 124  */
 125 #define CONFIG_CMD_SATA
 126 #ifdef CONFIG_CMD_SATA
 127   #define CONFIG_DWC_AHSATA
 128   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 129   #define CONFIG_DWC_AHSATA_PORT_ID     0
 130   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 131   #define CONFIG_LBA48
 132   #define CONFIG_LIBATA
 133 #endif
 134
 135 /*
 136  * PCI express
 137  */
 138 #define CONFIG_CMD_PCI
 139 #ifdef CONFIG_CMD_PCI
 140 #define CONFIG_PCI
 141 #define CONFIG_PCI_PNP
 142 #define CONFIG_PCI_SCAN_SHOW
 143 #define CONFIG_PCI_FIXUP_DEV
 144 #define CONFIG_PCIE_IMX
 145 #endif
 146
 147 /*
 148  * PMIC
 149  */
 150 #define CONFIG_POWER
 151 #define CONFIG_POWER_I2C
 152 #define CONFIG_POWER_PFUZE100
 153 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 154 #define CONFIG_POWER_LTC3676
 155 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 156
 157 /* Various command support */
 158 #include <config_cmd_default.h>
 159 #undef CONFIG_CMD_IMLS
 160 #define CONFIG_CMD_PING
 161 #define CONFIG_CMD_DHCP
 162 #define CONFIG_CMD_MII
 163 #define CONFIG_CMD_NET
 164 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 165 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 166 #define CONFIG_CMD_SETEXPR
 167 #define CONFIG_CMD_BOOTZ
 168 #define CONFIG_CMD_GSC
 169 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 170 #define CONFIG_CMD_UBI
 171 #define CONFIG_RBTREE
 172 #define CONFIG_LZO
 173 #define CONFIG_CMD_FUSE          /* eFUSE read/write support */
 174 #ifdef CONFIG_CMD_FUSE
 175 #define CONFIG_MXC_OCOTP
 176 #endif
 177
 178
 179 /* Ethernet support */
 180 #define CONFIG_FEC_MXC
 181 #define CONFIG_E1000
 182 #define CONFIG_MII
 183 #define IMX_FEC_BASE             ENET_BASE_ADDR
 184 #define CONFIG_FEC_XCV_TYPE      RGMII
 185 #define CONFIG_FEC_MXC_PHYADDR   0
 186 #define CONFIG_PHYLIB
 187 #define CONFIG_ARP_TIMEOUT       200UL
 188
 189 /* USB Configs */
 190 #define CONFIG_CMD_USB
 191 #define CONFIG_USB_EHCI
 192 #define CONFIG_USB_EHCI_MX6
 193 #define CONFIG_USB_STORAGE
 194 #define CONFIG_USB_HOST_ETHER
 195 #define CONFIG_USB_ETHER_ASIX
 196 #define CONFIG_USB_ETHER_SMSC95XX
 197 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 198 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 199 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 200 #define CONFIG_MXC_USB_FLAGS      0
 201 #define CONFIG_USB_KEYBOARD
 202 #define CONFIG_CI_UDC
 203 #define CONFIG_USBD_HS
 204 #define CONFIG_USB_GADGET_DUALSPEED
 205 #define CONFIG_USB_ETHER
 206 #define CONFIG_USB_ETH_CDC
 207 #define CONFIG_NETCONSOLE
 208 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 209
 210 /* USB Mass Storage Gadget */
 211 #define CONFIG_USB_GADGET
 212 #define CONFIG_CMD_USB_MASS_STORAGE
 213 #define CONFIG_USB_GADGET_MASS_STORAGE
 214 #define CONFIG_USBDOWNLOAD_GADGET
 215 #define CONFIG_USB_GADGET_VBUS_DRAW    2
 216
 217 /* Netchip IDs */
 218 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
 219 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
 220 #define CONFIG_G_DNL_MANUFACTURER "Gateworks"
 221
 222 /* Framebuffer and LCD */
 223 #define CONFIG_VIDEO
 224 #define CONFIG_VIDEO_IPUV3
 225 #define CONFIG_CFB_CONSOLE
 226 #define CONFIG_VGA_AS_SINGLE_DEVICE
 227 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 228 #define CONFIG_VIDEO_BMP_RLE8
 229 #define CONFIG_SPLASH_SCREEN
 230 #define CONFIG_BMP_16BPP
 231 #define CONFIG_VIDEO_LOGO
 232 #define CONFIG_IPUV3_CLK          260000000
 233 #define CONFIG_CMD_HDMIDETECT
 234 #define CONFIG_CONSOLE_MUX
 235 #define CONFIG_IMX_HDMI
 236 #define CONFIG_IMX_VIDEO_SKIP
 237
 238 /* serial console (ttymxc1,115200) */
 239 #define CONFIG_CONS_INDEX              1
 240 #define CONFIG_BAUDRATE                115200
 241
 242 /* Miscellaneous configurable options */
 243 #define CONFIG_SYS_LONGHELP
 244 #define CONFIG_SYS_HUSH_PARSER
 245 #define CONFIG_SYS_PROMPT                    "Ventana > "
 246 #define CONFIG_SYS_CBSIZE                    1024
 247 #define CONFIG_AUTO_COMPLETE
 248 #define CONFIG_CMDLINE_EDITING
 249 #define CONFIG_HWCONFIG
 250
 251 /* Print Buffer Size */
 252 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 253 #define CONFIG_SYS_MAXARGS                 16
 254 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 255
 256 /* Memory configuration */
 257 #define CONFIG_SYS_MEMTEST_START       0x10000000
 258 #define CONFIG_SYS_MEMTEST_END         0x10010000
 259 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 260 #define CONFIG_SYS_TEXT_BASE             0x17800000
 261 #define CONFIG_SYS_LOAD_ADDR           0x12000000
 262
 263 /* Physical Memory Map */
 264 #define CONFIG_NR_DRAM_BANKS           1
 265 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 266 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 267 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 268 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 269
 270 #define CONFIG_SYS_INIT_SP_OFFSET \
 271         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 272 #define CONFIG_SYS_INIT_SP_ADDR \
 273         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 274
 275 /* FLASH and environment organization */
 276 #define CONFIG_SYS_NO_FLASH  /* no NOR flash */
 277
 278 /*
 279  * MTD Command for mtdparts
 280  */
 281 #define CONFIG_CMD_MTDPARTS
 282 #define CONFIG_MTD_DEVICE
 283 #define CONFIG_MTD_PARTITIONS
 284 #ifdef CONFIG_SPI_FLASH
 285 #define MTDIDS_DEFAULT    "nor0=nor"
 286 #define MTDPARTS_DEFAULT  \
 287         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 288 #else
 289 #define MTDIDS_DEFAULT    "nand0=nand"
 290 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 291 #endif
 292
 293 /* Persistent Environment Config */
 294 #define CONFIG_ENV_OVERWRITE    /* allow to overwrite serial and ethaddr */
 295 #ifdef CONFIG_SPI_FLASH
 296 #define CONFIG_ENV_IS_IN_SPI_FLASH
 297 #else
 298 #define CONFIG_ENV_IS_IN_NAND
 299 #endif
 300 #if defined(CONFIG_ENV_IS_IN_MMC)
 301   #define CONFIG_ENV_OFFSET              (6 * 64 * 1024)
 302   #define CONFIG_ENV_SIZE                (8 * 1024)
 303   #define CONFIG_SYS_MMC_ENV_DEV         0
 304 #elif defined(CONFIG_ENV_IS_IN_NAND)
 305   #define CONFIG_ENV_OFFSET              (16 << 20)
 306   #define CONFIG_ENV_SECT_SIZE           (128 << 10)
 307   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 308   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 << 10))
 309   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 310 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 311   #define CONFIG_ENV_OFFSET              (512 * 1024)
 312   #define CONFIG_ENV_SECT_SIZE           (64 * 1024)
 313   #define CONFIG_ENV_SIZE                (8 * 1024)
 314   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 315   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 316   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 317   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 318 #endif
 319
 320 /* Environment */
 321 #define CONFIG_BOOTDELAY          3
 322 #define CONFIG_LOADADDR           CONFIG_SYS_LOAD_ADDR
 323 #define CONFIG_IPADDR             192.168.1.1
 324 #define CONFIG_SERVERIP           192.168.1.146
 325 #define HWCONFIG_DEFAULT \
 326         "hwconfig=rs232;" \
 327         "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
 328
 329 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 330         "usb_pgood_delay=2000\0" \
 331         "console=ttymxc1\0" \
 332         "bootdevs=usb mmc sata flash\0" \
 333         HWCONFIG_DEFAULT \
 334         "video=\0" \
 335         \
 336         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 337         "mtdids=" MTDIDS_DEFAULT "\0" \
 338         \
 339         "fdt_high=0xffffffff\0" \
 340         "fdt_addr=0x18000000\0" \
 341         "initrd_high=0xffffffff\0" \
 342         "bootdir=boot\0" \
 343         "loadfdt=" \
 344                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 345                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 346                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 347                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 348                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 349                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 350                 "fi\0" \
 351         \
 352         "script=6x_bootscript-ventana\0" \
 353         "loadscript=" \
 354                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 355                         "source; " \
 356                 "fi\0" \
 357         \
 358         "uimage=uImage\0" \
 359         "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
 360         "mmc_boot=" \
 361                 "setenv fsload 'ext2load mmc 0:1'; " \
 362                 "mmc dev 0 && mmc rescan && " \
 363                 "setenv dtype mmc; run loadscript; " \
 364                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 365                         "setenv bootargs console=${console},${baudrate} " \
 366                                 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
 367                                 "rootwait rw ${video} ${extra}; " \
 368                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 369                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 370                         "else " \
 371                                 "bootm; " \
 372                         "fi; " \
 373                 "fi\0" \
 374         \
 375         "sata_boot=" \
 376                 "setenv fsload 'ext2load sata 0:1'; sata init && " \
 377                 "setenv dtype sata; run loadscript; " \
 378                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 379                         "setenv bootargs console=${console},${baudrate} " \
 380                                 "root=/dev/sda1 rootfstype=ext4 " \
 381                                 "rootwait rw ${video} ${extra}; " \
 382                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 383                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 384                         "else " \
 385                                 "bootm; " \
 386                         "fi; " \
 387                 "fi\0" \
 388         "usb_boot=" \
 389                 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
 390                 "setenv dtype usb; run loadscript; " \
 391                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 392                         "setenv bootargs console=${console},${baudrate} " \
 393                                 "root=/dev/sda1 rootfstype=ext4 " \
 394                                 "rootwait rw ${video} ${extra}; " \
 395                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 396                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 397                         "else " \
 398                                 "bootm; " \
 399                         "fi; " \
 400                 "fi\0"
 401
 402 #ifdef CONFIG_SPI_FLASH
 403         #define CONFIG_EXTRA_ENV_SETTINGS \
 404         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 405         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 406         "image_uboot=ventana/u-boot_spi.imx\0" \
 407         \
 408         "spi_koffset=0x90000\0" \
 409         "spi_klen=0x200000\0" \
 410         \
 411         "spi_updateuboot=echo Updating uboot from " \
 412                 "${serverip}:${image_uboot}...; " \
 413                 "tftpboot ${loadaddr} ${image_uboot} && " \
 414                 "sf probe && sf erase 0 80000 && " \
 415                         "sf write ${loadaddr} 400 ${filesize}\0" \
 416         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 417                 "to ${spi_koffset} ...; " \
 418                 "tftp ${loadaddr} ${image_os} && " \
 419                 "sf probe && " \
 420                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 421         \
 422         "flash_boot=" \
 423                 "if sf probe && " \
 424                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 425                         "setenv bootargs console=${console},${baudrate} " \
 426                                 "root=/dev/mtdblock3 " \
 427                                 "rootfstype=squashfs,jffs2 " \
 428                                 "${video} ${extra}; " \
 429                         "bootm; " \
 430                 "fi\0"
 431 #else
 432         #define CONFIG_EXTRA_ENV_SETTINGS \
 433         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 434         \
 435         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 436         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 437                 "tftp ${loadaddr} ${image_rootfs} && " \
 438                 "nand erase.part rootfs && " \
 439                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 440         \
 441         "flash_boot=" \
 442                 "setenv fsload 'ubifsload'; " \
 443                 "ubi part rootfs; " \
 444                 "if ubi check boot; then " \
 445                         "ubifsmount ubi0:boot; " \
 446                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 447                                 "rootfstype=squashfs,ubifs; " \
 448                         "setenv bootdir; " \
 449                 "elif ubi check rootfs; then " \
 450                         "ubifsmount ubi0:rootfs; " \
 451                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 452                                 "rootfstype=ubifs; " \
 453                 "fi; " \
 454                 "setenv dtype nand; run loadscript; " \
 455                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 456                         "setenv bootargs console=${console},${baudrate} " \
 457                                 "root=${root} ${video} ${extra}; " \
 458                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 459                                 "ubifsumount; " \
 460                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 461                         "else " \
 462                                 "ubifsumount; bootm; " \
 463                         "fi; " \
 464                 "fi\0"
 465 #endif
 466
 467 #define CONFIG_BOOTCOMMAND \
 468         "for btype in ${bootdevs}; do " \
 469                 "echo; echo Attempting ${btype} boot...; " \
 470                 "if run ${btype}_boot; then; fi; " \
 471         "done"
 472
 473 /* Device Tree Support */
 474 #define CONFIG_OF_BOARD_SETUP
 475 #define CONFIG_OF_LIBFDT
 476 #define CONFIG_FDT_FIXUP_PARTITIONS
 477
 478 #ifndef CONFIG_SYS_DCACHE_OFF
 479   #define CONFIG_CMD_CACHE
 480 #endif
 481
 482 #endif                         /* __CONFIG_H */