include/configs/gw_ventana.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Gateworks Corporation
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 /* SPL */
  10 /* Location in NAND to read U-Boot from */
  11 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  12
  13 /* Falcon Mode */
  14 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  15
  16 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  17 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  18
  19 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  20 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  21 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  22 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  23
  24 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  25 #include "mx6_common.h"
  26
  27 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  28
  29 /* Serial ATAG */
  30 #define CONFIG_SERIAL_TAG
  31
  32 /* Size of malloc() pool */
  33 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  34
  35 /* Init Functions */
  36
  37 /* Driver Model */
  38 #ifndef CONFIG_SPL_BUILD
  39 #define CONFIG_DM_THERMAL
  40 #endif
  41
  42 /* Thermal */
  43 #define CONFIG_IMX_THERMAL
  44
  45 /* Serial */
  46 #define CONFIG_MXC_UART
  47 #define CONFIG_MXC_UART_BASE           UART2_BASE
  48
  49 #if !defined(CONFIG_SPI_FLASH) && defined(CONFIG_SPL_NAND_SUPPORT)
  50 /* Enable NAND support */
  51 #ifdef CONFIG_CMD_NAND
  52   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  53   #define CONFIG_SYS_NAND_BASE          0x40000000
  54   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  55   #define CONFIG_SYS_NAND_ONFI_DETECTION
  56
  57   /* DMA stuff, needed for GPMI/MXS NAND support */
  58 #endif
  59
  60 #endif /* CONFIG_SPI_FLASH */
  61
  62 /* I2C Configs */
  63 #define CONFIG_SYS_I2C
  64 #define CONFIG_SYS_I2C_MXC
  65 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  66 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  67 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  68 #define CONFIG_SYS_I2C_SPEED            100000
  69 #define CONFIG_I2C_GSC                  0
  70 #define CONFIG_I2C_EDID
  71
  72 /* MMC Configs */
  73 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  74
  75 /*
  76  * SATA Configs
  77  */
  78 #ifdef CONFIG_CMD_SATA
  79   #define CONFIG_SYS_SATA_MAX_DEVICE    1
  80   #define CONFIG_DWC_AHSATA_PORT_ID     0
  81   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
  82   #define CONFIG_LBA48
  83 #endif
  84
  85 /*
  86  * PCI express
  87  */
  88 #ifdef CONFIG_CMD_PCI
  89 #define CONFIG_PCI_SCAN_SHOW
  90 #define CONFIG_PCI_FIXUP_DEV
  91 #define CONFIG_PCIE_IMX
  92 #endif
  93
  94 /*
  95  * PMIC
  96  */
  97 #define CONFIG_POWER
  98 #define CONFIG_POWER_I2C
  99 #define CONFIG_POWER_PFUZE100
 100 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 101 #define CONFIG_POWER_LTC3676
 102 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 103
 104 /* Various command support */
 105
 106 /* Ethernet support */
 107 #define CONFIG_FEC_MXC
 108 #define IMX_FEC_BASE             ENET_BASE_ADDR
 109 #define CONFIG_FEC_XCV_TYPE      RGMII
 110 #define CONFIG_FEC_MXC_PHYADDR   0
 111 #define CONFIG_ARP_TIMEOUT       200UL
 112
 113 /* USB Configs */
 114 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 115 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 116 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 117 #define CONFIG_MXC_USB_FLAGS      0
 118 #define CONFIG_USBD_HS
 119 #define CONFIG_NETCONSOLE
 120
 121 /* Framebuffer and LCD */
 122 #define CONFIG_VIDEO_LOGO
 123 #define CONFIG_IMX_HDMI
 124 #define CONFIG_IMX_VIDEO_SKIP
 125 #define CONFIG_VIDEO_BMP_LOGO
 126 #define CONFIG_SPLASH_SCREEN_ALIGN
 127 #define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */
 128
 129 /* Miscellaneous configurable options */
 130 #define CONFIG_HWCONFIG
 131
 132 /* Memory configuration */
 133
 134 /* Physical Memory Map */
 135 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 136 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 137 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 138 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 139
 140 #define CONFIG_SYS_INIT_SP_OFFSET \
 141         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 142 #define CONFIG_SYS_INIT_SP_ADDR \
 143         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 144
 145 /*
 146  * MTD Command for mtdparts
 147  */
 148
 149 /* Persistent Environment Config */
 150 #if defined(CONFIG_ENV_IS_IN_MMC)
 151   #define CONFIG_SYS_MMC_ENV_DEV         0
 152   #define CONFIG_SYS_MMC_ENV_PART        1
 153 #endif
 154
 155 /* Environment */
 156 #define CONFIG_IPADDR             192.168.1.1
 157 #define CONFIG_SERVERIP           192.168.1.146
 158
 159 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 160         "pcidisable=1\0" \
 161         "splashpos=m,m\0" \
 162         "usb_pgood_delay=2000\0" \
 163         "console=ttymxc1\0" \
 164         "bootdevs=usb mmc sata flash\0" \
 165         "hwconfig=_UNKNOWN_\0" \
 166         "video=\0" \
 167         \
 168         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 169         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 170         "disk=0\0" \
 171         "part=1\0" \
 172         \
 173         "fdt_high=0xffffffff\0" \
 174         "fdt_addr=0x18000000\0" \
 175         "initrd_high=0xffffffff\0" \
 176         "fixfdt=" \
 177                 "fdt addr ${fdt_addr}\0" \
 178         "bootdir=boot\0" \
 179         "loadfdt=" \
 180                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 181                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 182                         "run fixfdt; " \
 183                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 184                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 185                         "run fixfdt; " \
 186                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 187                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 188                         "run fixfdt; " \
 189                 "fi\0" \
 190         \
 191         "fs=ext4\0" \
 192         "script=6x_bootscript-ventana\0" \
 193         "loadscript=" \
 194                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 195                         "source ${loadaddr}; " \
 196                 "fi\0" \
 197         \
 198         "uimage=uImage\0" \
 199         "mmc_root=mmcblk0p1\0" \
 200         "mmc_boot=" \
 201                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
 202                 "mmc dev ${disk} && mmc rescan && " \
 203                 "setenv dtype mmc; run loadscript; " \
 204                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 205                         "setenv bootargs console=${console},${baudrate} " \
 206                                 "root=/dev/${mmc_root} rootfstype=${fs} " \
 207                                 "rootwait rw ${video} ${extra}; " \
 208                         "if run loadfdt; then " \
 209                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 210                         "else " \
 211                                 "bootm; " \
 212                         "fi; " \
 213                 "fi\0" \
 214         \
 215         "sata_boot=" \
 216                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
 217                 "sata init && " \
 218                 "setenv dtype sata; run loadscript; " \
 219                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 220                         "setenv bootargs console=${console},${baudrate} " \
 221                                 "root=/dev/sda1 rootfstype=${fs} " \
 222                                 "rootwait rw ${video} ${extra}; " \
 223                         "if run loadfdt; then " \
 224                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 225                         "else " \
 226                                 "bootm; " \
 227                         "fi; " \
 228                 "fi\0" \
 229         "usb_boot=" \
 230                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
 231                 "usb start && usb dev ${disk} && " \
 232                 "setenv dtype usb; run loadscript; " \
 233                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 234                         "setenv bootargs console=${console},${baudrate} " \
 235                                 "root=/dev/sda1 rootfstype=${fs} " \
 236                                 "rootwait rw ${video} ${extra}; " \
 237                         "if run loadfdt; then " \
 238                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 239                         "else " \
 240                                 "bootm; " \
 241                         "fi; " \
 242                 "fi\0"
 243
 244 #ifdef CONFIG_SPI_FLASH
 245         #define CONFIG_EXTRA_ENV_SETTINGS \
 246         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 247         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 248         "image_uboot=ventana/u-boot_spi.imx\0" \
 249         \
 250         "spi_koffset=0x90000\0" \
 251         "spi_klen=0x200000\0" \
 252         \
 253         "spi_updateuboot=echo Updating uboot from " \
 254                 "${serverip}:${image_uboot}...; " \
 255                 "tftpboot ${loadaddr} ${image_uboot} && " \
 256                 "sf probe && sf erase 0 80000 && " \
 257                         "sf write ${loadaddr} 400 ${filesize}\0" \
 258         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 259                 "to ${spi_koffset} ...; " \
 260                 "tftp ${loadaddr} ${image_os} && " \
 261                 "sf probe && " \
 262                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 263         \
 264         "flash_boot=" \
 265                 "if sf probe && " \
 266                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 267                         "setenv bootargs console=${console},${baudrate} " \
 268                                 "root=/dev/mtdblock3 " \
 269                                 "rootfstype=squashfs,jffs2 " \
 270                                 "${video} ${extra}; " \
 271                         "bootm; " \
 272                 "fi\0"
 273 #else
 274         #define CONFIG_EXTRA_ENV_SETTINGS \
 275         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 276         \
 277         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 278         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 279                 "tftp ${loadaddr} ${image_rootfs} && " \
 280                 "nand erase.part rootfs && " \
 281                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 282         \
 283         "flash_boot=" \
 284                 "setenv fsload 'ubifsload'; " \
 285                 "ubi part rootfs; " \
 286                 "if ubi check boot; then " \
 287                         "ubifsmount ubi0:boot; " \
 288                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 289                                 "rootfstype=squashfs,ubifs; " \
 290                         "setenv bootdir; " \
 291                 "elif ubi check rootfs; then " \
 292                         "ubifsmount ubi0:rootfs; " \
 293                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 294                                 "rootfstype=ubifs; " \
 295                 "fi; " \
 296                 "setenv dtype nand; run loadscript; " \
 297                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 298                         "setenv bootargs console=${console},${baudrate} " \
 299                                 "root=${root} ${video} ${extra}; " \
 300                         "if run loadfdt; then " \
 301                                 "ubifsumount; " \
 302                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 303                         "else " \
 304                                 "ubifsumount; bootm; " \
 305                         "fi; " \
 306                 "fi\0"
 307 #endif
 308
 309 #define CONFIG_BOOTCOMMAND \
 310         "for btype in ${bootdevs}; do " \
 311                 "echo; echo Attempting ${btype} boot...; " \
 312                 "if run ${btype}_boot; then; fi; " \
 313         "done"
 314
 315 #endif                         /* __CONFIG_H */