include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 #define CONFIG_SPL_BOARD_INIT
  12 #define CONFIG_SPL_NAND_SUPPORT
  13 #define CONFIG_SPL_MMC_SUPPORT
  14 #define CONFIG_SPL_FAT_SUPPORT
  15 /*
  16 #define CONFIG_SPL_SATA_SUPPORT
  17 */
  18 /* Location in NAND to read U-Boot from */
  19 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)
  20
  21 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  22 #include "mx6_common.h"
  23 #define CONFIG_MX6
  24 #define CONFIG_DISPLAY_CPUINFO         /* display cpu info */
  25 #define CONFIG_DISPLAY_BOARDINFO_LATE  /* display board info (after reloc) */
  26
  27 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  28
  29 #include <asm/arch/imx-regs.h>
  30 #include <asm/imx-common/gpio.h>
  31
  32 /* ATAGs */
  33 #define CONFIG_CMDLINE_TAG
  34 #define CONFIG_SETUP_MEMORY_TAGS
  35 #define CONFIG_INITRD_TAG
  36 #define CONFIG_SERIAL_TAG
  37 #define CONFIG_REVISION_TAG
  38
  39 #define CONFIG_SYS_GENERIC_BOARD
  40
  41 /* Size of malloc() pool */
  42 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  43
  44 /* Init Functions */
  45 #define CONFIG_BOARD_EARLY_INIT_F
  46 #define CONFIG_MISC_INIT_R
  47
  48 /* GPIO */
  49 #define CONFIG_MXC_GPIO
  50
  51 /* Serial */
  52 #define CONFIG_MXC_UART
  53 #define CONFIG_MXC_UART_BASE           UART2_BASE
  54
  55 #ifdef CONFIG_SPI_FLASH
  56
  57 /* SPI */
  58 #define CONFIG_CMD_SF
  59 #ifdef CONFIG_CMD_SF
  60   #define CONFIG_MXC_SPI
  61   #define CONFIG_SPI_FLASH_MTD
  62   #define CONFIG_SPI_FLASH_BAR
  63   #define CONFIG_SPI_FLASH_WINBOND
  64   #define CONFIG_SF_DEFAULT_BUS              0
  65   #define CONFIG_SF_DEFAULT_CS               0
  66                                              /* GPIO 3-19 (21248) */
  67   #define CONFIG_SF_DEFAULT_SPEED            30000000
  68   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  69 #endif
  70
  71 #else
  72 /* Enable NAND support */
  73 #define CONFIG_CMD_TIME
  74 #define CONFIG_CMD_NAND
  75 #define CONFIG_CMD_NAND_TRIMFFS
  76 #ifdef CONFIG_CMD_NAND
  77   #define CONFIG_NAND_MXS
  78   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  79   #define CONFIG_SYS_NAND_BASE          0x40000000
  80   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  81   #define CONFIG_SYS_NAND_ONFI_DETECTION
  82
  83   /* DMA stuff, needed for GPMI/MXS NAND support */
  84   #define CONFIG_APBH_DMA
  85   #define CONFIG_APBH_DMA_BURST
  86   #define CONFIG_APBH_DMA_BURST8
  87 #endif
  88
  89 #endif /* CONFIG_SPI_FLASH */
  90
  91 /* Flattened Image Tree Suport */
  92 #define CONFIG_FIT
  93 #define CONFIG_FIT_VERBOSE
  94
  95 /* I2C Configs */
  96 #define CONFIG_CMD_I2C
  97 #define CONFIG_SYS_I2C
  98 #define CONFIG_SYS_I2C_MXC
  99 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 100 #define CONFIG_SYS_I2C_SPEED            100000
 101 #define CONFIG_I2C_GSC                  0
 102 #define CONFIG_I2C_PMIC                 1
 103 #define CONFIG_I2C_EDID
 104
 105 /* MMC Configs */
 106 #define CONFIG_FSL_ESDHC
 107 #define CONFIG_FSL_USDHC
 108 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 109 #define CONFIG_SYS_FSL_USDHC_NUM       1
 110 #define CONFIG_MMC
 111 #define CONFIG_CMD_MMC
 112 #define CONFIG_GENERIC_MMC
 113 #define CONFIG_BOUNCE_BUFFER
 114
 115 /* Filesystem support */
 116 #define CONFIG_CMD_EXT2
 117 #define CONFIG_CMD_EXT4
 118 #define CONFIG_CMD_EXT4_WRITE
 119 #define CONFIG_CMD_FAT
 120 #define CONFIG_CMD_UBIFS
 121 #define CONFIG_DOS_PARTITION
 122
 123 /*
 124  * SATA Configs
 125  */
 126 #define CONFIG_CMD_SATA
 127 #ifdef CONFIG_CMD_SATA
 128   #define CONFIG_DWC_AHSATA
 129   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 130   #define CONFIG_DWC_AHSATA_PORT_ID     0
 131   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 132   #define CONFIG_LBA48
 133   #define CONFIG_LIBATA
 134 #endif
 135
 136 /*
 137  * PCI express
 138  */
 139 #define CONFIG_CMD_PCI
 140 #ifdef CONFIG_CMD_PCI
 141 #define CONFIG_PCI
 142 #define CONFIG_PCI_PNP
 143 #define CONFIG_PCI_SCAN_SHOW
 144 #define CONFIG_PCI_FIXUP_DEV
 145 #define CONFIG_PCIE_IMX
 146 #endif
 147
 148 /*
 149  * PMIC
 150  */
 151 #define CONFIG_POWER
 152 #define CONFIG_POWER_I2C
 153 #define CONFIG_POWER_PFUZE100
 154 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 155 #define CONFIG_POWER_LTC3676
 156 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 157
 158 /* Various command support */
 159 #include <config_cmd_default.h>
 160 #undef CONFIG_CMD_IMLS
 161 #define CONFIG_CMD_PING
 162 #define CONFIG_CMD_DHCP
 163 #define CONFIG_CMD_MII
 164 #define CONFIG_CMD_NET
 165 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 166 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 167 #define CONFIG_CMD_SETEXPR
 168 #define CONFIG_CMD_BOOTZ
 169 #define CONFIG_CMD_GSC
 170 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 171 #define CONFIG_CMD_UBI
 172 #define CONFIG_RBTREE
 173 #define CONFIG_LZO
 174 #define CONFIG_CMD_FUSE          /* eFUSE read/write support */
 175 #ifdef CONFIG_CMD_FUSE
 176 #define CONFIG_MXC_OCOTP
 177 #endif
 178
 179
 180 /* Ethernet support */
 181 #define CONFIG_FEC_MXC
 182 #define CONFIG_E1000
 183 #define CONFIG_MII
 184 #define IMX_FEC_BASE             ENET_BASE_ADDR
 185 #define CONFIG_FEC_XCV_TYPE      RGMII
 186 #define CONFIG_FEC_MXC_PHYADDR   0
 187 #define CONFIG_PHYLIB
 188 #define CONFIG_ARP_TIMEOUT       200UL
 189
 190 /* USB Configs */
 191 #define CONFIG_CMD_USB
 192 #define CONFIG_USB_EHCI
 193 #define CONFIG_USB_EHCI_MX6
 194 #define CONFIG_USB_STORAGE
 195 #define CONFIG_USB_HOST_ETHER
 196 #define CONFIG_USB_ETHER_ASIX
 197 #define CONFIG_USB_ETHER_SMSC95XX
 198 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 199 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 200 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 201 #define CONFIG_MXC_USB_FLAGS      0
 202 #define CONFIG_USB_KEYBOARD
 203 #define CONFIG_CI_UDC
 204 #define CONFIG_USBD_HS
 205 #define CONFIG_USB_GADGET_DUALSPEED
 206 #define CONFIG_USB_ETHER
 207 #define CONFIG_USB_ETH_CDC
 208 #define CONFIG_NETCONSOLE
 209 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 210
 211 /* USB Mass Storage Gadget */
 212 #define CONFIG_USB_GADGET
 213 #define CONFIG_CMD_USB_MASS_STORAGE
 214 #define CONFIG_USB_GADGET_MASS_STORAGE
 215 #define CONFIG_USBDOWNLOAD_GADGET
 216 #define CONFIG_USB_GADGET_VBUS_DRAW    2
 217
 218 /* Netchip IDs */
 219 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
 220 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
 221 #define CONFIG_G_DNL_MANUFACTURER "Gateworks"
 222
 223 /* Framebuffer and LCD */
 224 #define CONFIG_VIDEO
 225 #define CONFIG_VIDEO_IPUV3
 226 #define CONFIG_CFB_CONSOLE
 227 #define CONFIG_VGA_AS_SINGLE_DEVICE
 228 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 229 #define CONFIG_VIDEO_BMP_RLE8
 230 #define CONFIG_SPLASH_SCREEN
 231 #define CONFIG_BMP_16BPP
 232 #define CONFIG_VIDEO_LOGO
 233 #define CONFIG_IPUV3_CLK          260000000
 234 #define CONFIG_CMD_HDMIDETECT
 235 #define CONFIG_CONSOLE_MUX
 236 #define CONFIG_IMX_HDMI
 237 #define CONFIG_IMX_VIDEO_SKIP
 238
 239 /* serial console (ttymxc1,115200) */
 240 #define CONFIG_CONS_INDEX              1
 241 #define CONFIG_BAUDRATE                115200
 242
 243 /* Miscellaneous configurable options */
 244 #define CONFIG_SYS_LONGHELP
 245 #define CONFIG_SYS_HUSH_PARSER
 246 #define CONFIG_SYS_PROMPT                    "Ventana > "
 247 #define CONFIG_SYS_CBSIZE                    1024
 248 #define CONFIG_AUTO_COMPLETE
 249 #define CONFIG_CMDLINE_EDITING
 250 #define CONFIG_HWCONFIG
 251
 252 /* Print Buffer Size */
 253 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 254 #define CONFIG_SYS_MAXARGS                 16
 255 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 256
 257 /* Memory configuration */
 258 #define CONFIG_SYS_MEMTEST_START       0x10000000
 259 #define CONFIG_SYS_MEMTEST_END         0x10010000
 260 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 261 #define CONFIG_SYS_TEXT_BASE             0x17800000
 262 #define CONFIG_SYS_LOAD_ADDR           0x12000000
 263
 264 /* Physical Memory Map */
 265 #define CONFIG_NR_DRAM_BANKS           1
 266 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 267 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 268 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 269 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 270
 271 #define CONFIG_SYS_INIT_SP_OFFSET \
 272         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 273 #define CONFIG_SYS_INIT_SP_ADDR \
 274         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 275
 276 /* FLASH and environment organization */
 277 #define CONFIG_SYS_NO_FLASH  /* no NOR flash */
 278
 279 /*
 280  * MTD Command for mtdparts
 281  */
 282 #define CONFIG_CMD_MTDPARTS
 283 #define CONFIG_MTD_DEVICE
 284 #define CONFIG_MTD_PARTITIONS
 285 #ifdef CONFIG_SPI_FLASH
 286 #define MTDIDS_DEFAULT    "nor0=nor"
 287 #define MTDPARTS_DEFAULT  \
 288         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 289 #else
 290 #define MTDIDS_DEFAULT    "nand0=nand"
 291 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 292 #endif
 293
 294 /* Persistent Environment Config */
 295 #define CONFIG_ENV_OVERWRITE    /* allow to overwrite serial and ethaddr */
 296 #ifdef CONFIG_SPI_FLASH
 297 #define CONFIG_ENV_IS_IN_SPI_FLASH
 298 #else
 299 #define CONFIG_ENV_IS_IN_NAND
 300 #endif
 301 #if defined(CONFIG_ENV_IS_IN_MMC)
 302   #define CONFIG_ENV_OFFSET              (6 * 64 * 1024)
 303   #define CONFIG_ENV_SIZE                (8 * 1024)
 304   #define CONFIG_SYS_MMC_ENV_DEV         0
 305 #elif defined(CONFIG_ENV_IS_IN_NAND)
 306   #define CONFIG_ENV_OFFSET              (16 << 20)
 307   #define CONFIG_ENV_SECT_SIZE           (128 << 10)
 308   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 309   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 << 10))
 310   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 311 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 312   #define CONFIG_ENV_OFFSET              (512 * 1024)
 313   #define CONFIG_ENV_SECT_SIZE           (64 * 1024)
 314   #define CONFIG_ENV_SIZE                (8 * 1024)
 315   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 316   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 317   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 318   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 319 #endif
 320
 321 /* Environment */
 322 #define CONFIG_BOOTDELAY          3
 323 #define CONFIG_LOADADDR           CONFIG_SYS_LOAD_ADDR
 324 #define CONFIG_IPADDR             192.168.1.1
 325 #define CONFIG_SERVERIP           192.168.1.146
 326 #define HWCONFIG_DEFAULT \
 327         "hwconfig=rs232;" \
 328         "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
 329
 330 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 331         "usb_pgood_delay=2000\0" \
 332         "console=ttymxc1\0" \
 333         "bootdevs=usb mmc sata flash\0" \
 334         HWCONFIG_DEFAULT \
 335         "video=\0" \
 336         \
 337         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 338         "mtdids=" MTDIDS_DEFAULT "\0" \
 339         \
 340         "fdt_high=0xffffffff\0" \
 341         "fdt_addr=0x18000000\0" \
 342         "initrd_high=0xffffffff\0" \
 343         "bootdir=boot\0" \
 344         "loadfdt=" \
 345                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 346                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 347                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 348                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 349                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 350                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 351                 "fi\0" \
 352         \
 353         "script=6x_bootscript-ventana\0" \
 354         "loadscript=" \
 355                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 356                         "source; " \
 357                 "fi\0" \
 358         \
 359         "uimage=uImage\0" \
 360         "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
 361         "mmc_boot=" \
 362                 "setenv fsload 'ext2load mmc 0:1'; " \
 363                 "mmc dev 0 && mmc rescan && " \
 364                 "setenv dtype mmc; run loadscript; " \
 365                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 366                         "setenv bootargs console=${console},${baudrate} " \
 367                                 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
 368                                 "rootwait rw ${video} ${extra}; " \
 369                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 370                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 371                         "else " \
 372                                 "bootm; " \
 373                         "fi; " \
 374                 "fi\0" \
 375         \
 376         "sata_boot=" \
 377                 "setenv fsload 'ext2load sata 0:1'; sata init && " \
 378                 "setenv dtype sata; run loadscript; " \
 379                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 380                         "setenv bootargs console=${console},${baudrate} " \
 381                                 "root=/dev/sda1 rootfstype=ext4 " \
 382                                 "rootwait rw ${video} ${extra}; " \
 383                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 384                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 385                         "else " \
 386                                 "bootm; " \
 387                         "fi; " \
 388                 "fi\0" \
 389         "usb_boot=" \
 390                 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
 391                 "setenv dtype usb; run loadscript; " \
 392                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 393                         "setenv bootargs console=${console},${baudrate} " \
 394                                 "root=/dev/sda1 rootfstype=ext4 " \
 395                                 "rootwait rw ${video} ${extra}; " \
 396                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 397                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 398                         "else " \
 399                                 "bootm; " \
 400                         "fi; " \
 401                 "fi\0"
 402
 403 #ifdef CONFIG_SPI_FLASH
 404         #define CONFIG_EXTRA_ENV_SETTINGS \
 405         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 406         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 407         "image_uboot=ventana/u-boot_spi.imx\0" \
 408         \
 409         "spi_koffset=0x90000\0" \
 410         "spi_klen=0x200000\0" \
 411         \
 412         "spi_updateuboot=echo Updating uboot from " \
 413                 "${serverip}:${image_uboot}...; " \
 414                 "tftpboot ${loadaddr} ${image_uboot} && " \
 415                 "sf probe && sf erase 0 80000 && " \
 416                         "sf write ${loadaddr} 400 ${filesize}\0" \
 417         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 418                 "to ${spi_koffset} ...; " \
 419                 "tftp ${loadaddr} ${image_os} && " \
 420                 "sf probe && " \
 421                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 422         \
 423         "flash_boot=" \
 424                 "if sf probe && " \
 425                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 426                         "setenv bootargs console=${console},${baudrate} " \
 427                                 "root=/dev/mtdblock3 " \
 428                                 "rootfstype=squashfs,jffs2 " \
 429                                 "${video} ${extra}; " \
 430                         "bootm; " \
 431                 "fi\0"
 432 #else
 433         #define CONFIG_EXTRA_ENV_SETTINGS \
 434         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 435         \
 436         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 437         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 438                 "tftp ${loadaddr} ${image_rootfs} && " \
 439                 "nand erase.part rootfs && " \
 440                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 441         \
 442         "flash_boot=" \
 443                 "setenv fsload 'ubifsload'; " \
 444                 "ubi part rootfs; " \
 445                 "if ubi check boot; then " \
 446                         "ubifsmount ubi0:boot; " \
 447                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 448                                 "rootfstype=squashfs,ubifs; " \
 449                         "setenv bootdir; " \
 450                 "elif ubi check rootfs; then " \
 451                         "ubifsmount ubi0:rootfs; " \
 452                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 453                                 "rootfstype=ubifs; " \
 454                 "fi; " \
 455                 "setenv dtype nand; run loadscript; " \
 456                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 457                         "setenv bootargs console=${console},${baudrate} " \
 458                                 "root=${root} ${video} ${extra}; " \
 459                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 460                                 "ubifsumount; " \
 461                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 462                         "else " \
 463                                 "ubifsumount; bootm; " \
 464                         "fi; " \
 465                 "fi\0"
 466 #endif
 467
 468 #define CONFIG_BOOTCOMMAND \
 469         "for btype in ${bootdevs}; do " \
 470                 "echo; echo Attempting ${btype} boot...; " \
 471                 "if run ${btype}_boot; then; fi; " \
 472         "done"
 473
 474 /* Device Tree Support */
 475 #define CONFIG_OF_BOARD_SETUP
 476 #define CONFIG_OF_LIBFDT
 477 #define CONFIG_FDT_FIXUP_PARTITIONS
 478
 479 #ifndef CONFIG_SYS_DCACHE_OFF
 480   #define CONFIG_CMD_CACHE
 481 #endif
 482
 483 #endif                         /* __CONFIG_H */