1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2013 Gateworks Corporation
10 /* Location in NAND to read U-Boot from */
13 #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
15 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
16 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
18 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
19 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
20 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
22 #include "imx6_spl.h" /* common IMX6 SPL configuration */
23 #include "mx6_common.h"
26 #define CONFIG_MXC_UART_BASE UART2_BASE
29 #define CONFIG_SYS_MAX_NAND_DEVICE 1
31 #undef CONFIG_SYS_BOOTM_LEN
32 #define CONFIG_SYS_BOOTM_LEN (64 << 20)
35 #define CONFIG_I2C_GSC 0
38 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
43 #ifdef CONFIG_CMD_SATA
44 #define CONFIG_DWC_AHSATA_PORT_ID 0
45 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
53 #define CONFIG_PCIE_IMX
59 #define CONFIG_POWER_PFUZE100
60 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
61 #define CONFIG_POWER_LTC3676
62 #define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
64 /* Various command support */
67 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
68 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
69 #define CONFIG_MXC_USB_FLAGS 0
70 #define CONFIG_USBD_HS
72 /* Framebuffer and LCD */
73 #define CONFIG_IMX_HDMI
74 #define CONFIG_IMX_VIDEO_SKIP
75 #define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
77 /* Miscellaneous configurable options */
78 #define CONFIG_HWCONFIG
80 /* Memory configuration */
82 /* Physical Memory Map */
83 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
84 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
85 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
86 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
88 #define CONFIG_SYS_INIT_SP_OFFSET \
89 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
90 #define CONFIG_SYS_INIT_SP_ADDR \
91 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
94 * MTD Command for mtdparts
97 /* Persistent Environment Config */
100 #define CONFIG_IPADDR 192.168.1.1
101 #define CONFIG_SERVERIP 192.168.1.146
103 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
105 "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
106 "usb_pgood_delay=2000\0" \
107 "console=ttymxc1\0" \
108 "bootdevs=usb mmc sata flash\0" \
109 "hwconfig=_UNKNOWN_\0" \
112 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
113 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
117 "fdt_high=0xffffffff\0" \
118 "fdt_addr=0x18000000\0" \
119 "initrd_high=0xffffffff\0" \
121 "fdt addr ${fdt_addr}\0" \
124 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
125 "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
127 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
128 "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
130 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
131 "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
136 "script=6x_bootscript-ventana\0" \
138 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
139 "source ${loadaddr}; " \
143 "mmc_root=mmcblk0p1\0" \
145 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
146 "mmc dev ${disk} && mmc rescan && " \
147 "setenv dtype mmc; run loadscript; " \
148 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
149 "setenv bootargs console=${console},${baudrate} " \
150 "root=/dev/${mmc_root} rootfstype=${fs} " \
151 "rootwait rw ${video} ${extra}; " \
152 "if run loadfdt; then " \
153 "bootm ${loadaddr} - ${fdt_addr}; " \
160 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
162 "setenv dtype sata; run loadscript; " \
163 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
164 "setenv bootargs console=${console},${baudrate} " \
165 "root=/dev/sda1 rootfstype=${fs} " \
166 "rootwait rw ${video} ${extra}; " \
167 "if run loadfdt; then " \
168 "bootm ${loadaddr} - ${fdt_addr}; " \
174 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
175 "usb start && usb dev ${disk} && " \
176 "setenv dtype usb; run loadscript; " \
177 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
178 "setenv bootargs console=${console},${baudrate} " \
179 "root=/dev/sda1 rootfstype=${fs} " \
180 "rootwait rw ${video} ${extra}; " \
181 "if run loadfdt; then " \
182 "bootm ${loadaddr} - ${fdt_addr}; " \
188 #ifdef CONFIG_SPI_FLASH
189 #define CONFIG_EXTRA_ENV_SETTINGS \
190 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
191 "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
192 "image_uboot=ventana/u-boot_spi.imx\0" \
194 "spi_koffset=0x90000\0" \
195 "spi_klen=0x200000\0" \
197 "spi_updateuboot=echo Updating uboot from " \
198 "${serverip}:${image_uboot}...; " \
199 "tftpboot ${loadaddr} ${image_uboot} && " \
200 "sf probe && sf erase 0 80000 && " \
201 "sf write ${loadaddr} 400 ${filesize}\0" \
202 "spi_update=echo Updating OS from ${serverip}:${image_os} " \
203 "to ${spi_koffset} ...; " \
204 "tftp ${loadaddr} ${image_os} && " \
206 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
210 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
211 "setenv bootargs console=${console},${baudrate} " \
212 "root=/dev/mtdblock3 " \
213 "rootfstype=squashfs,jffs2 " \
214 "${video} ${extra}; " \
218 #define CONFIG_EXTRA_ENV_SETTINGS \
219 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
221 "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
222 "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
223 "tftp ${loadaddr} ${image_rootfs} && " \
224 "nand erase.part rootfs && " \
225 "nand write ${loadaddr} rootfs ${filesize}\0" \
228 "setenv fsload 'ubifsload'; " \
229 "ubi part rootfs; " \
230 "if ubi check boot; then " \
231 "ubifsmount ubi0:boot; " \
232 "setenv root ubi0:rootfs ubi.mtd=2 " \
233 "rootfstype=squashfs,ubifs; " \
235 "elif ubi check rootfs; then " \
236 "ubifsmount ubi0:rootfs; " \
237 "setenv root ubi0:rootfs ubi.mtd=2 " \
238 "rootfstype=ubifs; " \
240 "setenv dtype nand; run loadscript; " \
241 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
242 "setenv bootargs console=${console},${baudrate} " \
243 "root=${root} ${video} ${extra}; " \
244 "if run loadfdt; then " \
246 "bootm ${loadaddr} - ${fdt_addr}; " \
248 "ubifsumount; bootm; " \
253 #endif /* __CONFIG_H */