include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 #define CONFIG_SPL_NAND_SUPPORT
  12 #define CONFIG_SPL_MMC_SUPPORT
  13 #define CONFIG_SPL_FAT_SUPPORT
  14 /*
  15 #define CONFIG_SPL_SATA_SUPPORT
  16 */
  17 /* Location in NAND to read U-Boot from */
  18 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)
  19
  20 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  21 #include "mx6_common.h"
  22 #define CONFIG_MX6
  23 #define CONFIG_DISPLAY_CPUINFO         /* display cpu info */
  24 #define CONFIG_DISPLAY_BOARDINFO_LATE  /* display board info (after reloc) */
  25
  26 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  27
  28 #include <asm/arch/imx-regs.h>
  29 #include <asm/imx-common/gpio.h>
  30
  31 /* ATAGs */
  32 #define CONFIG_CMDLINE_TAG
  33 #define CONFIG_SETUP_MEMORY_TAGS
  34 #define CONFIG_INITRD_TAG
  35 #define CONFIG_SERIAL_TAG
  36 #define CONFIG_REVISION_TAG
  37
  38 #define CONFIG_SYS_GENERIC_BOARD
  39
  40 /* Size of malloc() pool */
  41 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  42
  43 /* Init Functions */
  44 #define CONFIG_BOARD_EARLY_INIT_F
  45 #define CONFIG_MISC_INIT_R
  46
  47 /* GPIO */
  48 #define CONFIG_MXC_GPIO
  49
  50 /* Serial */
  51 #define CONFIG_MXC_UART
  52 #define CONFIG_MXC_UART_BASE           UART2_BASE
  53
  54 #ifdef CONFIG_SPI_FLASH
  55
  56 /* SPI */
  57 #define CONFIG_CMD_SF
  58 #ifdef CONFIG_CMD_SF
  59   #define CONFIG_MXC_SPI
  60   #define CONFIG_SPI_FLASH_MTD
  61   #define CONFIG_SPI_FLASH_BAR
  62   #define CONFIG_SPI_FLASH_WINBOND
  63   #define CONFIG_SF_DEFAULT_BUS              0
  64   #define CONFIG_SF_DEFAULT_CS               0
  65                                              /* GPIO 3-19 (21248) */
  66   #define CONFIG_SF_DEFAULT_SPEED            30000000
  67   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  68 #endif
  69
  70 #else
  71 /* Enable NAND support */
  72 #define CONFIG_CMD_TIME
  73 #define CONFIG_CMD_NAND
  74 #define CONFIG_CMD_NAND_TRIMFFS
  75 #ifdef CONFIG_CMD_NAND
  76   #define CONFIG_NAND_MXS
  77   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  78   #define CONFIG_SYS_NAND_BASE          0x40000000
  79   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  80   #define CONFIG_SYS_NAND_ONFI_DETECTION
  81
  82   /* DMA stuff, needed for GPMI/MXS NAND support */
  83   #define CONFIG_APBH_DMA
  84   #define CONFIG_APBH_DMA_BURST
  85   #define CONFIG_APBH_DMA_BURST8
  86 #endif
  87
  88 #endif /* CONFIG_SPI_FLASH */
  89
  90 /* Flattened Image Tree Suport */
  91 #define CONFIG_FIT
  92 #define CONFIG_FIT_VERBOSE
  93
  94 /* I2C Configs */
  95 #define CONFIG_CMD_I2C
  96 #define CONFIG_SYS_I2C
  97 #define CONFIG_SYS_I2C_MXC
  98 #define CONFIG_SYS_I2C_SPEED            100000
  99 #define CONFIG_I2C_GSC                  0
 100 #define CONFIG_I2C_PMIC                 1
 101
 102 /* MMC Configs */
 103 #define CONFIG_FSL_ESDHC
 104 #define CONFIG_FSL_USDHC
 105 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 106 #define CONFIG_SYS_FSL_USDHC_NUM       1
 107 #define CONFIG_MMC
 108 #define CONFIG_CMD_MMC
 109 #define CONFIG_GENERIC_MMC
 110 #define CONFIG_BOUNCE_BUFFER
 111
 112 /* Filesystem support */
 113 #define CONFIG_CMD_EXT2
 114 #define CONFIG_CMD_FAT
 115 #define CONFIG_CMD_UBIFS
 116 #define CONFIG_DOS_PARTITION
 117
 118 /* Network config - Allow larger/faster download for TFTP/NFS */
 119 #define CONFIG_IP_DEFRAG
 120 #define CONFIG_TFTP_BLOCKSIZE 4096
 121 #define CONFIG_NFS_READ_SIZE  4096
 122
 123 /*
 124  * SATA Configs
 125  */
 126 #define CONFIG_CMD_SATA
 127 #ifdef CONFIG_CMD_SATA
 128   #define CONFIG_DWC_AHSATA
 129   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 130   #define CONFIG_DWC_AHSATA_PORT_ID     0
 131   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 132   #define CONFIG_LBA48
 133   #define CONFIG_LIBATA
 134 #endif
 135
 136 /*
 137  * PCI express
 138  */
 139 #define CONFIG_CMD_PCI
 140 #ifdef CONFIG_CMD_PCI
 141 #define CONFIG_PCI
 142 #define CONFIG_PCI_PNP
 143 #define CONFIG_PCI_SCAN_SHOW
 144 #define CONFIG_PCI_FIXUP_DEV
 145 #define CONFIG_PCIE_IMX
 146 #endif
 147
 148 /*
 149  * PMIC
 150  */
 151 #define CONFIG_POWER
 152 #define CONFIG_POWER_I2C
 153 #define CONFIG_POWER_PFUZE100
 154 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 155 #define CONFIG_POWER_LTC3676
 156 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 157
 158 /* Various command support */
 159 #include <config_cmd_default.h>
 160 #undef CONFIG_CMD_IMLS
 161 #define CONFIG_CMD_PING
 162 #define CONFIG_CMD_DHCP
 163 #define CONFIG_CMD_MII
 164 #define CONFIG_CMD_NET
 165 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 166 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 167 #define CONFIG_CMD_SETEXPR
 168 #define CONFIG_CMD_BOOTZ
 169 #define CONFIG_CMD_GSC
 170 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 171 #define CONFIG_CMD_UBI
 172 #define CONFIG_RBTREE
 173 #define CONFIG_LZO
 174 #define CONFIG_CMD_FUSE          /* eFUSE read/write support */
 175 #ifdef CONFIG_CMD_FUSE
 176 #define CONFIG_MXC_OCOTP
 177 #endif
 178
 179
 180 /* Ethernet support */
 181 #define CONFIG_FEC_MXC
 182 #define CONFIG_MII
 183 #define IMX_FEC_BASE             ENET_BASE_ADDR
 184 #define CONFIG_FEC_XCV_TYPE      RGMII
 185 #define CONFIG_ETHPRIME          "FEC"
 186 #define CONFIG_FEC_MXC_PHYADDR   0
 187 #define CONFIG_PHYLIB
 188 #define CONFIG_ARP_TIMEOUT       200UL
 189
 190 /* USB Configs */
 191 #define CONFIG_CMD_USB
 192 #define CONFIG_USB_EHCI
 193 #define CONFIG_USB_EHCI_MX6
 194 #define CONFIG_USB_STORAGE
 195 #define CONFIG_USB_HOST_ETHER
 196 #define CONFIG_USB_ETHER_ASIX
 197 #define CONFIG_USB_ETHER_SMSC95XX
 198 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 199 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 200 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 201 #define CONFIG_MXC_USB_FLAGS      0
 202 #define CONFIG_USB_KEYBOARD
 203 #define CONFIG_CI_UDC
 204 #define CONFIG_USBD_HS
 205 #define CONFIG_USB_GADGET_DUALSPEED
 206 #define CONFIG_USB_ETHER
 207 #define CONFIG_USB_ETH_CDC
 208 #define CONFIG_NETCONSOLE
 209 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 210
 211 /* Framebuffer and LCD */
 212 #define CONFIG_VIDEO
 213 #define CONFIG_VIDEO_IPUV3
 214 #define CONFIG_CFB_CONSOLE
 215 #define CONFIG_VGA_AS_SINGLE_DEVICE
 216 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 217 #define CONFIG_VIDEO_BMP_RLE8
 218 #define CONFIG_SPLASH_SCREEN
 219 #define CONFIG_BMP_16BPP
 220 #define CONFIG_VIDEO_LOGO
 221 #define CONFIG_IPUV3_CLK          260000000
 222 #define CONFIG_CMD_HDMIDETECT
 223 #define CONFIG_CONSOLE_MUX
 224 #define CONFIG_IMX_HDMI
 225 #define CONFIG_IMX_VIDEO_SKIP
 226
 227 /* serial console (ttymxc1,115200) */
 228 #define CONFIG_CONS_INDEX              1
 229 #define CONFIG_BAUDRATE                115200
 230
 231 /* Miscellaneous configurable options */
 232 #define CONFIG_SYS_LONGHELP
 233 #define CONFIG_SYS_HUSH_PARSER
 234 #define CONFIG_SYS_PROMPT                    "Ventana > "
 235 #define CONFIG_SYS_CBSIZE                    1024
 236 #define CONFIG_AUTO_COMPLETE
 237 #define CONFIG_CMDLINE_EDITING
 238 #define CONFIG_HWCONFIG
 239
 240 /* Print Buffer Size */
 241 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 242 #define CONFIG_SYS_MAXARGS                 16
 243 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 244
 245 /* Memory configuration */
 246 #define CONFIG_SYS_MEMTEST_START       0x10000000
 247 #define CONFIG_SYS_MEMTEST_END         0x10010000
 248 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 249 #define CONFIG_SYS_TEXT_BASE             0x17800000
 250 #define CONFIG_SYS_LOAD_ADDR           0x12000000
 251
 252 /* Physical Memory Map */
 253 #define CONFIG_NR_DRAM_BANKS           1
 254 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 255 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 256 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 257 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 258
 259 #define CONFIG_SYS_INIT_SP_OFFSET \
 260         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 261 #define CONFIG_SYS_INIT_SP_ADDR \
 262         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 263
 264 /* FLASH and environment organization */
 265 #define CONFIG_SYS_NO_FLASH  /* no NOR flash */
 266
 267 /*
 268  * MTD Command for mtdparts
 269  */
 270 #define CONFIG_CMD_MTDPARTS
 271 #define CONFIG_MTD_DEVICE
 272 #define CONFIG_MTD_PARTITIONS
 273 #ifdef CONFIG_SPI_FLASH
 274 #define MTDIDS_DEFAULT    "nor0=nor"
 275 #define MTDPARTS_DEFAULT  \
 276         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 277 #else
 278 #define MTDIDS_DEFAULT    "nand0=nand"
 279 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 280 #endif
 281
 282 /* Persistent Environment Config */
 283 #define CONFIG_ENV_OVERWRITE    /* allow to overwrite serial and ethaddr */
 284 #ifdef CONFIG_SPI_FLASH
 285 #define CONFIG_ENV_IS_IN_SPI_FLASH
 286 #else
 287 #define CONFIG_ENV_IS_IN_NAND
 288 #endif
 289 #if defined(CONFIG_ENV_IS_IN_MMC)
 290   #define CONFIG_ENV_OFFSET              (6 * 64 * 1024)
 291   #define CONFIG_ENV_SIZE                (8 * 1024)
 292   #define CONFIG_SYS_MMC_ENV_DEV         0
 293 #elif defined(CONFIG_ENV_IS_IN_NAND)
 294   #define CONFIG_ENV_OFFSET              (16 << 20)
 295   #define CONFIG_ENV_SECT_SIZE           (128 << 10)
 296   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 297   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 << 10))
 298   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 299 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 300   #define CONFIG_ENV_OFFSET              (512 * 1024)
 301   #define CONFIG_ENV_SECT_SIZE           (64 * 1024)
 302   #define CONFIG_ENV_SIZE                (8 * 1024)
 303   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 304   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 305   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 306   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 307 #endif
 308
 309 /* Environment */
 310 #define CONFIG_BOOTDELAY          3
 311 #define CONFIG_LOADADDR           CONFIG_SYS_LOAD_ADDR
 312 #define CONFIG_IPADDR             192.168.1.1
 313 #define CONFIG_SERVERIP           192.168.1.146
 314 #define HWCONFIG_DEFAULT \
 315         "hwconfig=rs232;" \
 316         "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
 317
 318 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 319         "console=ttymxc1\0" \
 320         "bootdevs=usb mmc sata flash\0" \
 321         HWCONFIG_DEFAULT \
 322         "video=\0" \
 323         \
 324         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 325         "mtdids=" MTDIDS_DEFAULT "\0" \
 326         \
 327         "fdt_high=0xffffffff\0" \
 328         "fdt_addr=0x18000000\0" \
 329         "loadfdt=" \
 330                 "if ${fsload} ${fdt_addr} boot/${fdt_file}; then " \
 331                         "echo Loaded DTB from boot/${fdt_file}; " \
 332                 "elif ${fsload} ${fdt_addr} boot/${fdt_file1}; then " \
 333                         "echo Loaded DTB from boot/${fdt_file1}; " \
 334                 "elif ${fsload} ${fdt_addr} boot/${fdt_file2}; then " \
 335                                 "echo Loaded DTB from boot/${fdt_file2}; " \
 336                 "fi\0" \
 337         \
 338         "script=boot/6x_bootscript-ventana\0" \
 339         "loadscript=" \
 340                 "if ${fsload} ${loadaddr} ${script}; then " \
 341                         "source; " \
 342                 "fi\0" \
 343         \
 344         "uimage=boot/uImage\0" \
 345         "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
 346         "mmc_boot=" \
 347                 "setenv fsload 'ext2load mmc 0:1'; " \
 348                 "mmc dev 0 && mmc rescan && " \
 349                 "run loadscript; " \
 350                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 351                         "setenv bootargs console=${console},${baudrate} " \
 352                                 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
 353                                 "rootwait rw ${video} ${extra}; " \
 354                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 355                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 356                         "else " \
 357                                 "bootm; " \
 358                         "fi; " \
 359                 "fi\0" \
 360         \
 361         "sata_boot=" \
 362                 "setenv fsload 'ext2load sata 0:1'; sata init && " \
 363                 "run loadscript; " \
 364                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 365                         "setenv bootargs console=${console},${baudrate} " \
 366                                 "root=/dev/sda1 rootfstype=ext4 " \
 367                                 "rootwait rw ${video} ${extra}; " \
 368                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 369                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 370                         "else " \
 371                                 "bootm; " \
 372                         "fi; " \
 373                 "fi\0" \
 374         "usb_boot=" \
 375                 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
 376                 "run loadscript; " \
 377                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 378                         "setenv bootargs console=${console},${baudrate} " \
 379                                 "root=/dev/sda1 rootfstype=ext4 " \
 380                                 "rootwait rw ${video} ${extra}; " \
 381                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 382                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 383                         "else " \
 384                                 "bootm; " \
 385                         "fi; " \
 386                 "fi\0"
 387
 388 #ifdef CONFIG_SPI_FLASH
 389         #define CONFIG_EXTRA_ENV_SETTINGS \
 390         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 391         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 392         "image_uboot=ventana/u-boot_spi.imx\0" \
 393         \
 394         "spi_koffset=0x90000\0" \
 395         "spi_klen=0x200000\0" \
 396         \
 397         "spi_updateuboot=echo Updating uboot from " \
 398                 "${serverip}:${image_uboot}...; " \
 399                 "tftpboot ${loadaddr} ${image_uboot} && " \
 400                 "sf probe && sf erase 0 80000 && " \
 401                         "sf write ${loadaddr} 400 ${filesize}\0" \
 402         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 403                 "to ${spi_koffset} ...; " \
 404                 "tftp ${loadaddr} ${image_os} && " \
 405                 "sf probe && " \
 406                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 407         \
 408         "flash_boot=" \
 409                 "if sf probe && " \
 410                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 411                         "setenv bootargs console=${console},${baudrate} " \
 412                                 "root=/dev/mtdblock3 " \
 413                                 "rootfstype=squashfs,jffs2 " \
 414                                 "${video} ${extra}; " \
 415                         "bootm; " \
 416                 "fi\0"
 417 #else
 418         #define CONFIG_EXTRA_ENV_SETTINGS \
 419         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 420         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 421         \
 422         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 423                 "tftp ${loadaddr} ${image_rootfs} && " \
 424                 "nand erase.part rootfs && " \
 425                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 426         \
 427         "flash_boot=" \
 428                 "setenv fsload 'ubifsload'; " \
 429                 "ubi part rootfs && ubifsmount ubi0:rootfs; " \
 430                 "run loadscript; " \
 431                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 432                         "setenv bootargs console=${console},${baudrate} " \
 433                                 "root=ubi0:rootfs ubi.mtd=2 " \
 434                                 "rootfstype=ubifs ${video} ${extra}; " \
 435                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 436                                 "ubifsumount; " \
 437                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 438                         "else " \
 439                                 "ubifsumount; bootm; " \
 440                         "fi; " \
 441                 "fi\0"
 442 #endif
 443
 444 #define CONFIG_BOOTCOMMAND \
 445         "for btype in ${bootdevs}; do " \
 446                 "echo; echo Attempting ${btype} boot...; " \
 447                 "if run ${btype}_boot; then; fi; " \
 448         "done"
 449
 450 /* Device Tree Support */
 451 #define CONFIG_OF_BOARD_SETUP
 452 #define CONFIG_OF_LIBFDT
 453 #define CONFIG_FDT_FIXUP_PARTITIONS
 454
 455 #ifndef CONFIG_SYS_DCACHE_OFF
 456   #define CONFIG_CMD_CACHE
 457 #endif
 458
 459 #endif                         /* __CONFIG_H */